Exterior Wash 110

Exterior™ Wash 110 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate smaller structures, features of a building and landscaping. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 110 is designed for superior color mixing applications and is based on quad-color premixed LEDs.

  • Uniform color mixing with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display


  • Powerful Premixed LEDs
  • Up to 1300 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0–100% intensity control


Tech specs

Physical Length: 240 mm (9.5 in.) Width: 198 mm (7.8 in.) Height: 257 mm (10.2 in.) Weight: 5.0 kg (11.1 lbs.)
Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW
Control and Programming Control systems: DMX, RDM DMX channels: 4 Setting, addressing, standalone programming: Control panel with OLED display Receiver: RS-485 Firmware update: Serial upload via DMX link DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20
Optics Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Light source: 4 x RGBW quad-color LEDs LED manufacturer: Cree Beam angle options No diffuser: 11° Narrow diffuser: 16° Medium diffuser: 24° Wide diffuser: 52° Very wide diffuser: 60° Asymmetric diffuser: 54° x 16° *Figure obtained under manufacturer's test conditions:
Photometric Data Total luminous output: 1300 lumens
Construction Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Color: Light grey (white, black or other colors available on request) Housing: Cast aluminum Effective Projected Area (EPA): 0.05 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) RoHS compliant
Installation Orientation: Any Mounting: Adjustable yoke Vertical aiming: TBA Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power consumption, steady state, all LEDs at zero intensity: 5 W Maximum total power consumption: 50 W Typical half-cycle RMS inrush current: 9.7 A Surge protection: 4 KV
Typical Power and Current 100 V, 60 Hz: 0.45 A, 42 W, PF 0.99 120 V, 60 Hz: 0.35 A, 42 W, PF 0.99 230 V, 50 Hz: 0.2 A, 42 W, PF 0.96 277 V, 60 Hz: 0.2 A, 42 W, PF 0.90 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F) Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below -20° C (-4° F) Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 160 BTU/hr
Approvals EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM
Included Items Power cable: Cable tail, 1.8 m (5.9 ft.), external diameter 9.5 mm (0.38 in.), installed Data cable: Cable tail, 1.8 m (5.9 ft.), external diameter 6.5 mm (0.26 in.), installed Cover plate for control panel
Accessories Optical: Exterior Wash 100 Series, narrow diffuser kit: P/N 91610145 Exterior Wash 100 Series, medium diffuser kit: P/N 91610146 Exterior Wash 100 Series, wide diffuser kit: P/N 91610147 Exterior Wash 100 Series, very wide diffuser kit: P/N 91610148 Exterior Wash 100 Series, asymmetric diffuser kit: P/N 91610149 Exterior Wash 100 Series, glare shield / snoot: P/N 91611740
Related Items Martin USB interface box incl. cables: P/N 90758090 M-PC 2U™ incl. Martin M-DMX Interface Box and USB cable: P/N 90737070
Ordering Information Exterior Wash 110, 10°, EU, aluminum: P/N 90510330 Exterior Wash 110, 10°, US, aluminum: P/N 90513545