Exterior Wash 300

Exterior Wash™ 300 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 300 is designed for narrow beam applications and is based on separate LEDs for red, green, blue and white

  • Narrow beam configuration with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display

Features

  • Powerful single color R,G,B,W LEDs
  • Up to 10.000 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0 – 100% intensity control

Tech specs

Physical Length: 283 mm (11.2 in.) Width: 404 mm (15.9 in.) Height: 439 mm (17.3 in.) Weight: 19.0 kg (42.0 lbs.)
Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW
Control and Programming Control systems: DMX, RDM DMX channels: 4 Setting, addressing, standalone programming: Control panel with OLED display Receiver: RS-485 Firmware update: Serial upload via DMX link DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20
Optics Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Light source: R, G, B and W single-color LEDs LED manufacturer: Cree Beam angle options No diffuser: 7.5° Narrow diffuser: 11.5° Medium diffuser: 25° Wide diffuser: 41° Very wide diffuser: 59° Asymmetric diffuser: 65° x 14.5° *Figure obtained under manufacturer's test conditions
Photometric Data Total luminous output: 10300 lumens
Construction Protection rating: IP66 Color: Light grey RAL 7035 Gloss 5, White RAL 9010 Gloss 7 Housing: Cast aluminum Effective Projected Area (EPA): 0.14 m² including snoot Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) RoHS compliant
Installation Orientation: Any Mounting: Adjustable yoke Vertical aiming: TBA Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power consumption, steady state, all LEDs at zero intensity: 6 W Maximum total power consumption: 280 W Typical half-cycle RMS inrush current: 10.9 A
Typical Power and Current 100 V, 60 Hz: 2.6 A, 252 W, PF 0.99 120 V, 60 Hz: 2.1 A, 250 W, PF 0.99 230 V, 50 Hz: 1.1 A, 242 W, PF 0.97 277 V, 60 Hz: 1.0 A, 242 W, PF 0.94 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F) Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below -20° C (-4° F) Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 945 BTU/hr
Approvals EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM
Included Items Power cable: Cable tail, 1.8 m (5.9 ft.), external diameter 9.5 mm (0.38 in.), installed Data cable: Cable tail, 1.8 m (5.9 ft.), external diameter 6.5 mm (0.26 in.), installed
Accessories Optical Exterior Wash 300 Series, narrow diffuser kit: P/N 91610155 Exterior Wash 300 Series, medium diffuser kit: P/N 91610156 Exterior Wash 300 Series, wide diffuser kit: P/N 91610157 Exterior Wash 300 Series, very wide diffuser kit: P/N 91610158 Exterior Wash 300 Series, asymmetric diffuser kit: P/N 91610159 Exterior Wash 300 Series, glare shield / snoot: P/N 91611735 Impact resistance: IK08 (with control panel display cover plate installed)
Related Items Martin USB interface box incl. cables: P/N 90758090 M-PC 2U™ incl. Martin M-DMX Interface Box and USB cable: P/N 90737070
Ordering Information Exterior Wash 300, 7°, EU, aluminum: P/N 90507070 Exterior Wash 300, 7°, US, aluminum: P/N 90507071