P3 PowerPort 1000 IP Rental

The P3 PowerPort 1000 IP Rental is an integrated power supply and data processor for Martin’s rental range of creative LED video products, including the VDO Sceptron™ and VC-Dots™. When driven by one of Martin’s award-winning P3™ System Controllers™, it combines stable power delivery with high-speed, high-capacity video processing. Setup and configuration are easy and intuitive. A full outdoor rating with robust IP65-rated connectors make the product perfect for outdoor rental installations.

  • Power and data processor for all Martin’s rental market creative LED video products
  • Flexible integration: can be located remotely, indoors or outdoors
  • Easy cabling and configuration

Features

  • P3 image processing technology
  • Set-up and addressing via P3 System Controller family
  • No local configuration needed
  • P3 input and thru to allow daisy-chaining
  • 4 hybrid power/data output ports
  • Truss-mountable or free-standing
  • Can be located up to 50 m away from the creative LED video products
  • IP65

References

Tech specs

Physical Length: 520 mm (20.5 in.) Width: 460 mm (18.2 in.) Height: 146 mm (5.8 in.) Weight: 8.5 kg (18.8 lbs.)
Control and Programming Addressing and status: Via P3 System Controller Mapping: Via P3 System Controller Firmware update: Via P3 System Controller
Control/User Interface Device status: Multicolor status LED Power output status: Four LEDs Data output status: Four LEDs Device test and reset: Pushbutton to call up local test patterns and reset device Status LEDs and pushbutton can be disabled remotely if required:
P3 Signal Protocol Signal type: Gigabit Ethernet Protocol: Proprietary Martin P3™ Hot pluggable: Yes, electrically isolated at all connections Cable type: Ethernet, CAT 5e or better Cable length: Up to 100 m (328 ft.) between any 2 devices, extendable with Ethernet switch or conversion to fiber
System integration VC-Dot™ family via VC-Feeder™ Exterior PixLine™ family VDO Sceptron™ family VC-Grid™ family (indoor product) VC-Strip™ family (indoor product) Exterior Dot-HP™ family
Construction Protection rating: IP65 NEMA enclosure rating: Type 3 Housing: Aluminum Color: Matt black Effective Projected Area (EPA): 0.22 m2 RoHS compliant
Installation Mounting: Flown from rigging clamps or free-standing Orientation: Any, except with connectors facing up or lid facing down
Connections Power input: Neutrik PowerCON TRUE1 P3 data in/out: Neutrik EtherCON Cat 6 Combined power & data out: Four 6-pin custom (BBD) IP66-rated sockets
Electrical AC power: 120-240 V nominal, 50/60 Hz Power supply units: Auto-ranging electronic switch-mode Typical total power consumption: 1000 W (including full load of connected display devices, all at full intensity) Typical half-cycle RMS inrush current at 230 V, 50 Hz: 20.9 A Total power consumption in idle state (at 25° C, all connected devices powered off): 22 W
Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 55° C Minimum ambient temperature (Ta min.): -30° C Total heat dissipation (calculated, +/- 10%): 345 BTU/hr. (not including display devices but with system at full load)
Approvals EU safety: EN 60950 EU EMC: EN 55032, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 60950-1 Canadian safety: CSA C22.2 No. 60950-1
Accessories Power cable Power Input Cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797 Power Input Cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786 Power connectors Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789 Data cable Data Cable, Cat 6 EtherCON-EtherCON 0.45 m (1.4 ft.): P/N 91611781 Data Cable, Cat 6 EtherCON-EtherCON 1.2 m (3.9 ft.): P/N 91611782 Data Cable, Cat 6 EtherCON-EtherCON 5 m (16.4 ft.): P/N 91611783 Data Connector, Cat 6 EtherCON: P/N 91611787 Adapters for connecting to VC-Dot cables: Power+Data Adapter M16-BBD 0.25 m (9.8 in.): P/N 91616053 Power+Data Adapter BBD-M16 0.25 m (9.8 in.): P/N 91616054 Rigging hardware G-clamp: P/N 91602003 Half-coupler clamp: P/N 91602005 Quick trigger clamp: P/N 91602007 Safety wire, safe working load 50 kg (110.2 lbs.): P/N 91604003
Related Items P3-050 System Controller: P/N 90721090 P3-100 System Controller: P/N 90721010 P3-150 System Controller: P/N 90721015 P3-200 System Controller: P/N 90721020 P3-300 System Controller: P/N 90721060 P3-PC System Controller: P/N 90721030 P3-PC License Code: P/N 39808028
Ordering Information Martin P3 PowerPort 1000 IP™, Rental Model: P/N 90721070