THRILL Multi-FX LED is a 3-in-1 LED light fixture with an impressive number of tricks up its sleeve, guaranteed to make your show larger than life. It is equipped with laser, strobe, and rotating colored multibeams with super bright output for a great variety of dazzling looks and mid-air effects.


With its high-speed, ultra-sharp laser beams, the THRILL Multi-FX LED is ideal for creating dramatic atmospheres and boosting energy levels in a variety of setups ranging from entertainment and club environments to wedding parties and corporate shows.

  • High-speed hybrid effect light fixture that energizes crowds with multibeams, laser and strobe effects
  • Easy plug-and-play control
  • Portable and lightweight


  • Energizing multi-effect light featuring multibeam, laser, strobe
  • Vibrant 5 x 3 W RGBWA rotating multibeam effects
  • Blinding 8 x 1 W white LEDs for strobe effects
  • Projects hundreds of razor sharp laser beams with 50 mW green and 100 mW red lasers
  • Easy to operate standalone sound-activated, master/slave control methods
  • 8 professionally pre-programmed shows
  • DMX operable for individualized control and design
  • Included adjustable bracket for hanging or surface mount
  • Common IEC mains inlet/thru – mains cable included


Tech specs

Physical Length: 249 mm (9.8 in.) Width: 229 mm (9.0 in.) Height: 249 mm (9.8 in.) Height with hanging bracket: 288 mm (11.3 in.) Weight: 4.0 kg (8.9 lbs.)
Dynamic Effects Multibeam effects Color mixing: RGBWA Color selection: 36 color presets Electronic dimming: 0-100% Strobe rate: 0-22 Hz Strobe and pulse effects: Variable speed and action, random strobe Electronic 'shutter' effect: Instant open and blackout Strobe effects Color: White Strobe rate: Fixed, 15 Hz Special effects: On/off, strobe effect, pulse effects, random and blackout Laser effects Color: Red, green Special effects: On/off, strobe effect, pulse effects, random and blackout
Control and Programming Control options: DMX, stand-alone Safety lockout switch, laser: Keyed switch on/off operation DMX channels: 2/16 Stand-alone trigger options: Sound-trigger, auto-run User interface: Control panel with LED display DMX compliance: ANSI E1.11 - USITT DMX512-A
Optics Multibeam and strobe Multibeam light source: 5 x 3 W RGBWA LEDs Strobe light source: 8 x 1 W White LEDs Minimum LED lifetime: 30 000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions
Laser Green laser, power / wavelength: 3.8 mW / 531 nm Red laser, power / wavelength: 1.5 mW / 659 nm Aperture diameter: 7 mm Beam shape: Divergent Maximum single-beam laser power from aperature: 7.5 mW Class: 3R (US: Class IIIR) Minimum laser lifetime: 3 000 hours* *Figure obtained under manufacturer's test conditions
Construction Housing: Steel Color: Black Ingress protection: IP20
Installation Mounting: Adjustable bracket, surface or truss mount Mounting points: Bracket for single rigging clamp, M12 or ½” Orientation: Any (respecting laser precautions) Location: Indoor, dry locations only, overhead use only Minimum distance above floor level: 3 m (9.8 ft.) Minimum distance from persons: 3 m (9.8 ft.)
Connections AC power in/thru: IEC male inlet/female connector, C14/C13 DMX data in/thru: 3-pin XLR
Electrical AC power: 100-240 V nominal, 50-60 Hz Fuse: F 3 AL, 250 V Typical total power consumption:: 35 W Maximum number of fixtures on AC power throughput, 100-130 V: 6 x THRILL Multi-FX LED or 3 A Maximum number of fixtures on AC power throughput, 220-240 V: 10 x THRILL Multi-FX LED or 3 A *Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current 110 V, 60 Hz: 0.5 A, 35 W * 230 V, 50 Hz: 0.3 A, 35 W * *Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal Cooling: Passive Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%) at full intensity, full white: 225 BTU/hr.
Approvals EU safety: EN 60598-1, EN 60598-2-17, EN 60825-1, EN 62031, EN 6247-1, EN 6247-2-13, EN 62493, IEC TR 62471-2 EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547 Australia/NZ (pending): RCM FDA (pending)
Included Items Power cable, EU, IEC C13 female, molded Schuko, 1.5 m (4.9 ft.) Power cable, US, IEC C13 female, molded NEMA 5-15P, 1.5 m (4.9 ft.) Mounting bracket and hardware Set of keys for laser lockout switch
Accessories Super lightweight half-coupler, black: P/N 91602018 Safety cable, SWL 60 kg (132 lb.), BGV C1/ DGUV 17, black: P/N 91604006
Ordering Information THRILL Multi-FX LED: P/N 90280117