JEM K1 Hazer (discontinued)

Larger Images

The Jem K1 Hazer is Martin’s top-of-the-line hazer for high performance applications where a high level of reliability and easy serviceability is required. Feature-rich and of solid construction, the Jem K1 provides the ideal combination of continuous operation, long hang time, and low fluid consumption for greater economy.   

Features

  • Designed for service ease
  • Continuous output
  • Output and density level control
  • 5000 m³/min haze output
  • Integrated high velocity fan (variable fan speed)
  • 600 W heat exchanger
  • 2.5 liter fluid capacity
  • Low fluid consumption and longer hang-time for greater economy
  • Water based - no oil residue on light fixtures
  • Automated shut-down procedure to prevent clogging
  • On-board DMX, 3 & 5 pin
  • On-board control panel
  • Fast access set-up mode
  • Optional digital remote control
  • Silent Mode
  • Eco mode extends run time and improves fluid economy

Specifications

Physical Length: 544 mm Width: 459 mm Height: 344 mm Dry weight: 21.5 kg
Performance Coverage volume: 5000 m3 per minute Max. operating time at full output (approx.): 17 hours Operating time: Continuous, automatic level adjustment Warm-up time (approx.): 5 minutes
Control and Programming Control options: Onboard control panel with 4-digit display Control options: Instant or timer-controlled output, 0-100% adjustable output level Control options: Adjustable Fan Speed Level DMX channels: 2 (output and fan) Optional digital remote control: 92765036
Construction Housing: Steel & aluminum Heat exchanger: 600 W, direct thermal protection
Fluid System Fluid pump: Oscillating piston, high pressure Onboard fluid capacity: 2.5 l Fluid consumption at peak output: 140 ml per hour Approved fluids: Jem K1 Haze Fluid™ only
Installation Orientation: Floor or flying kit
Connections Power connection: Neutrik PowerCon DMX data: 3-pin and 5-pin XLR sockets Remote control: 3-pin locking XLR
Electrical AC power (EU models): 220-240 V nominal, 50 Hz AC power (US models): 110-120 V nominal, 60 Hz Main fuse (220-240 V power): 5 AT Main fuse (110-120 V power): 10 AT
Typical Power and Current US model: 120 V, 60 Hz: 675 W, 6.0 A EU model: 230 V, 50 Hz: 675 W, 3.1 A Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
Thermal Maximum ambient temperature (Ta max.): 40° C Exterior surface temperature, steady state: 40° C Max. nozzle temperature: 200° C
Approvals EU EMC: EN 6100-6-3:2001 - Part 6-3 EU safety: EN 60 335-1:2002 Immunity: EN 61000-6-1:2001 - Part 6-1 ETL approvals (cETLus): UL Std.998, CAN/CSA Std. C22.2 No 104-01
CE ETL C US Intertek 
Accessories K1™ Haze Fluid, 2.5 gal,/9.5 ltr.: 97120411 K1™ Haze Fluid, 4 x 2.5 ltr.: 97120407 JEM K1 Hazer Remote Control: 92765036
Ordering Information Jem K1 Hazer, 110 V: 92225900 Jem K1 Hazer, 240 V: 92225901

Downloads

  Version Language Size Uploaded
Manuals
Flying Kit K1/Hazer Pro
en version B, updated: May 11, 2018
en  576 KB May 11, 2018
User manual
en version G, updated: May 18, 2018
en  776 KB May 18, 2018
K1 Hazer User Manual Addendum For Rev G
en version 1.0, updated: May 11, 2018
1.0  en  40.7 KB May 11, 2018
Manuel d´utilisation
fr version G, updated: May 11, 2018
fr  540 KB May 11, 2018
Bedienungsanleitung K1
de version G, updated: May 11, 2018
de  493 KB May 11, 2018
Illustrations
JEM K1 Hazer Dimensions
en version A, updated: May 18, 2018
en  260 KB May 18, 2018
Jem K1 Hazer - Flying Hole Dimensions
en version A, updated: May 11, 2018
en  51.6 KB May 11, 2018
Compliances
CE Compliance K1 Hazer
en version A, updated: May 11, 2018
en  69.6 KB May 11, 2018
ETL K1 Hazer ATM
en version A, updated: May 11, 2018
en  41.1 KB May 11, 2018
Parts
Epsilon 5 AVR Programmer
en version A, updated: May 22, 2018
A   en    May 22, 2018
Martin Heat Exchange Part Numbers
en version B, updated: May 11, 2018
en  116 KB May 11, 2018
Service Procedures
Temperature calibration methods
en version A, updated: May 22, 2018
A   en    May 22, 2018

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

Support/FAQs