MAC Allure Profile Firmware v1.2.0

Last Updated: Feb 05, 2020

New features
- - - - - - - - - - - - - - - - - - -
- RDM firmware upload with progress bar implemented, can only be used for MAC Allures running firmware version 1.2.0 or newer.
- Serial number can be displayed by pressing ENTER and DOWN when in battery mode.

- - - - - - - - - - - - - - - - - - -
- LED driver goes in standby if dimmer is 0 for 10 minutes.
- If onboard firmware BANK copy is corrupted or missing BANK warning will now be displayed until BANK file is overwritten.
- DMX stability, firmware upload to another fixture on the same dmx link could crash or reset MAC Allure fixtures.
- BCER (beam calibration error) could be shown even if the color calibration data was correct.
- Firmware upload, Color engine PCB could have a very slow firmware upload which could result in MMER or firmware installation error.
-Tungsten emulator, when shutter was closed it could result in strobing output.

The firmware of the MAC Allure Profile can be updated over DMX cable using Martin Companion, and over network via the Martin P3 System Controller. Please download those applications to update fixture firmware that way.
The firmware of the MAC Allure Profile can also be updated by inserting a USB memory device into the fixture. Please download the .BANK file here and place it on a USB memory device to update fixture firmware that way.

Previous Versions

Related Products

Previous Versions