VC-Dots and Feeder Firmware v2.4.1

Last Updated: May 22, 2018

Notes
- Only compatible with P3 PowerPorts running firmware 2.0.5 or higher

Improvements
- Fixture will no longer turn off its LEDs when running in DMX mode at temperatures below 0 degrees Celsius
- Thermal protection added when running in DMX mode
- Support for RDM function 0x8700 (serial number)
- VMX performance and timing optimized
- Unused ADC sensors removed from sensor info in RDM
- Faster detection of VMX or DMX during power on
- Status LED is now able to show if there has been no DMX packets for at least one second
- RDM supply voltage sensor prefix changed from MILI to CENTI
- RDM timing violations corrected to support larger RDM packets and shorter delays between packets
- Calibrated white test pattern now always calibrated regardless of calibration mode

Instructions
- Extract the P3 firmware file from the archive and import it into the P3 System Controller

Previous Versions


Related Products


Previous Versions