Inground 200 (discontinued)

Larger Images

The Inground 200 series offers the benefits of dynamic light and discreet buried installation combined in a simple, easy-to-use system of programmable 150 W luminaires.


  • 150 W metal halide lamp
  • Choice of 2 color systems: Single-color or full spectrum CMY
  • Choice of optical systems: medium, wide, very wide or wallwash
  • 0-100% intensity control
  • High optical performance: uniform distribution of light and color
  • Extensive range of optical accessories
  • DMX, stand-alone, synchronized (master/slave)
  • Weatherproof rating: IP65 and IP67
  • Full drive-over capability
  • Low surface temperature for installation in pedestrian areas

Tech Specs

PhysicalHeight: 496 mm (19.6 in.)Trim ring outer diameter: 340 mm 13.4 in.)Trim ring thickness: 7 mm (0.28 in.)Housing top flange outer Ø: 310 mm (12.2 in.)Weight: 20 kg (44.1 lbs.)Weight resistance (in installation sleeve with stable groundwork): 5000 kg (11024 lbs)Front glass weight resistance (load from pneumatic tire):5000 kg (11024 lbs.)Installation SleeveInstallation sleeve height: 600 mm (23.7 in.)Installation sleeve tube external Ø: 334 mm (13.4 in.)Installation sleeve base flange external Ø: 416 mm (16.4 in.)
Control and ProgrammingCMY modelsControl options: DMX, stand-alone, synchronized (master/slave)DMX channels: 6Stand-alone trigger options: Internal timerStand-alone memory: 20 scenesDMX address setting: Martin MUM™ application running on Windows PCStand-alone and master/slave programming: Martin MUM™ application running on Windows PCProtocol: USITT DMX512/1990Receiver: RS-485
LampType: 150 W metal halideApproved lamps: Philips CDM SA/T 150 W/942, Philips CDM-T 150 W/830, Osram HCI-T 150 W/WDL, Osram HCI-T 150 W/NDLSocket: G12Control: Automatic and/or remote on/off
ConstructionHousing: AluminumFinish: Black anodizedTrim ring: Stainless steelInstallation sleeve: Acid-resistant stainless steelProtection rating: IP65/67
InstallationOrientation: UplightMinimum distance to combustible materials: 1 m (3.3 ft.)Minimum distance to illuminated surfaces: 0.5 m (1.7 ft.)
ConnectionsPower input: 3 m (9.9 ft.) hard-wired cable tailDMX data in/out (CMY models): 3 m (9.9 ft.) hard-wired cable tail
ElectricalAC power: 210/277 V nominal, 60 Hz; 230 V nominal, 50 Hz
Typical Power and Current208 V, 60 Hz: 183 W, 1.0 A230 V, 50 Hz: 190 W, 1.0 A230 V, 60 Hz: 186 W, 0.9 A250 V, 50 Hz: 191 W, 0.9 AMeasurements made at nominal voltage. Allow for a deviation of +/- 10%.
ThermalMaximum ambient temperature (Ta max.): 35° C (95° F) in direct burial installation, 25° C (77° F) in sleeve installationMax. ambient temperature (Ta max.) can be higher if installation is approved by Martin ArchitecturalMinimum ambient temperature (Ta min.): -20° C (-4° F), power must be maintained below 0° C (32° F)Maximum surface temperature, steady state, Ta=40° C (104° F): 80° C (176° F)Cooling: Internal fan, conduction via installation site fill material
Typical Heat Output (calculated)208 V, 60 Hz: 625 BTU/hr.230 V, 50 Hz: 648 BTU/hr.230 V, 60 Hz: 635 BTU/hr.250 V, 50 Hz: 652 BTU/hr.Allow for a deviation of +/- 10% from typical figures listed above.
ApprovalsEU EMC: EN 55 015, EN 55 103-1, EN 61 547EU safety: EN 60598-2-5Canadian safety: CSA C22.2 No. 250.0-00US safety: UL 1598
Included ItemsPhilips CDM-SA/T 150 W lamp: P/N 97010111Two spare trim ring screws (Torx cap, countersunk): P/N 08110803Silica gel anti-humidity sachet (inside product, must be removed during installation)Silica gel anti-humidity sachet (separate, must be fastened in fixture during installation)DMX termination resistor (CMY models): P/N 04150308
AccessoriesInstallation sleeve, bevelled mount: P/N 91611194Installation sleeve, flush mount: P/N 9161121525 kg rinsed, dried sand for installation: P/N 91611237Anti-glare kit, medium configuration (ring louver): P/N 91611202Anti-glare kit, wallwash configuration: P/N 91611197Anti-skid frontglass (circular etched): P/N 91611238Anti-skid frontglass (design etched): P/N 91611198Beamshaper module: P/N 91611207Rock guard kit, aluminum: P/N 91611209Rock guard kit, brass: P/N 91611208Rock guard kit, stainless steel: P/N 91611199Tamperproof trim ring screw set with key: P/N 91611200Trim ring kit, bevelled, brass: P/N 91611211Trim ring kit, bevelled, aluminum: P/N 91611210Trim ring kit, flush mount, aluminum: P/N 91611213Trim ring kit, flush mount, brass: P/N 91611214Trim ring kit, flush mount, stainless steel: P/N 91611212
Related Items32° Medium beam angle kit: P/N 6240038456° Wide-angle kit: P/N 6232310498° Very wide-angle kit: P/N 62323103104° Wallwash kit (add P/N 23808660 Mirror plate to order): P/N 62323103Mirror plate for wallwash configuration: P/N 23808660Shading plate (light spill limiter), medium configuration:P/N 23812085Shading plate (light spill limiter), wide, very wide and wallwash configurations: P/N 23812083CMY modelsMartin DABS1™ USB interface box incl. cables: P/N 90758090
Spare PartsPhilips CDM-SA/T 150 W lamp: P/N 97010111Front glass: P/N 41700007Front glass seal: P/N 20600441Connections compartment/power compartment seal:P/N 20600450Anti-humidity sachet in sealed aluminum bag: P/N 37220000Ten anti-humidity sachets in sealed aluminum bag (Service Kit): P/N 37220001


  Version Language Size Uploaded
Photometric Data en    May 20, 2007
Bedienungsanleitung, Single Color de  359 KB Apr 07, 2005
Installationsdaten de  1.2 MB Nov 02, 2005
Manuale d'uso, Single Color it  904 KB Dec 20, 2004
IMPORTANT: Current user manual is being revised en    Aug 25, 2011
Manuel d'utilisation, Single Color fr  450 KB Oct 13, 2004
User manual, Single Color model en  347 KB Jan 29, 2009
Guida all'installazione it  1.43 MB Dec 20, 2004
Guide d´installation fr  988 KB May 22, 2005
Installation Guide en  913 KB Jun 14, 2011
User manual, CMY model en  1010 KB Jan 29, 2009
Bedienungsanleitung, CMY & Six Color de  1.32 MB Apr 07, 2005
Manuale d'uso, CMY & Six Color it  3.07 MB Nov 17, 2004
Manuel d´utilisation, CMY & Six Color fr  1.4 MB Jun 05, 2005
Inground 200 Wide IES en  37.7 KB Mar 14, 2013
Inground 200 Wallwash IES en  42.6 KB Mar 14, 2013
Inground 200 Very Wide IES en  41.4 KB Mar 14, 2013
Inground 200_Medium IES en  137 KB Mar 14, 2013
Inground 200 and Installation Sleeve Dimensions en  60.1 KB Nov 22, 2004
Flush mounted Inground in sleeve en  66.2 KB Nov 29, 2006
Installation Sleeve Dimensions en  21.8 KB Sep 03, 2009
Bevelled and flushmount front ring dimensions en  151 KB Jan 28, 2009
Bevelled edge Inground in sleeve en  64.9 KB Nov 29, 2006
3D Symbols
Vectorworks Symbols 2.6  en  66.4 MB May 01, 2019
ETL Authorization To Mark en  131 KB Jul 07, 2008
IP Test Result en  1.8 MB Jun 14, 2004
EU Declaration of Conformity en  59.5 KB Nov 15, 2004
Martin USB Tools 1.2    107 MB Dec 13, 2017
Inground 200 Main CPU 1.3.0    34.7 KB Apr 23, 2018
Trim Ring / Installation Sleeve Types en  43.4 KB Nov 21, 2006
Service Notes
Bodentank Installationsanweisung de  300 KB Nov 02, 2005
Epoxy Sealant Kit (Do not apply to fixtures with preinstalled cables) en  110 KB Jan 25, 2007
Installation sleeve instruction note en  352 KB Dec 05, 2004
Hints And Tips
Electrical safety test equipment en    Nov 09, 2008
Ego X4 and Inground Profiles en    Sep 22, 2004
Discharge Lighting Shutdown Guidelines en    Mar 16, 2008
Avoiding Excessive Humidity in the Inground 200 en    Dec 09, 2004

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.