Martin Jem ZR33 Hi Mass

Larger Images

The ZR33 Hi-Mass is a powerful and instant atmosphere generator for large clubs, stage productions, rental companies and industrial applications.

Features

Onboard DMX
On-board control panel
Removable panel for remote control
Multifunctional remote control
Floor standing or truss mounting
Continuous output
1000 m³/min fog output
1500 W heat exchanger
8 min heat-up time
9.5 liter fluid capacity
Different fluid options for different applications
Low fluid sensing

Specifications

Physical Length: 685 mm Width: 345 mm Height: 225 mm Dry weight: 19 kg

Performance Max. fog output (approx.): 1000 m³ per minute Max. operating time at full output (approx.): 180 minutes Operating time: Continuous, automatic level adjustment Warm-up time (approx.): 8 minutes

Control and Programming Control options: Remote control (supplied), DMX, 0-10 V analog Remote control features: Instant or timer-controlled variable output Delay 2-144 seconds, run time 2-144 seconds: DMX channels: 1 Protocol: USITT DMX512/1990

Construction Housing: Steel & aluminum Heat exchanger: 1500 W, direct thermal protection

Fluid System Fluid pump: Oscillating piston, high pressure X2 Onboard fluid capacity: 9.5 l Fluid consumption at peak output: 150 ml per minute

Installation Orientation: Floor or flying kit

Connections Remote control: 3-pin locking XLR DMX data: 3-pin locking XLR 0-10 V analog: 3-pin locking XLR Power cable entry: Hard-wired

Electrical AC power (EU models): 220-240 V nominal, 50 Hz AC power (US models): 110-120 V nominal, 60 Hz Main fuse (220-240 V power): 10 A Main fuse (110-120 V power): 20 A

Typical Power and Current US model: 110 V, 60 Hz: 1570 W, 14.27 A 115 V, 60 Hz: 1716 W, 14.92 A 120 V, 60 Hz: 1868 W, 15.56 A EU model: 220 V, 50 Hz: 1319 W, 4.08 A 230 V, 50 Hz: 1442 W, 6.26 A 240 V, 50 Hz: 1570 W, 7.13 A Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:

Thermal Maximum ambient temperature (Ta max.): 40° C Exterior surface temperature, steady state: 50° C Max. nozzle temperature: 200° C

Approvals EU safety: EN 50 081-1, EN 50 082-1 EU safety: EN 60 335-1 (1995)

Included Items User manual: 35010008 Remote control: 92765016 Container 9.5 l: 34300528

Accessories Pro Smoke Studio (DX Mix) fluid: Pro Smoke Super (ZR Mix) fluid: Pro Smoke High Density (SP Mix) fluid: I-fog fluid: Ducting Kit incl. adapter and 5 m of 4-inch (104mm) ducting: 92625005 DMX termination plug, 3-pin male XLR: 91613017

Ordering Information JEM ZR33 Hi-Mass, 110 V: 92215201 JEM ZR33 Hi-Mass, 240V: 92215200

Downloads

	Version	Language	Size	Uploaded
Manuals
User manual version E, updated: May 18, 2018	E		134 KB	May 18, 2018
Illustrations
Dimensions version A, updated: May 18, 2018	A		88.5 KB	May 18, 2018
Compliances
Environ Calib Factor ZR33/Mag 2500Hz/Glaciator X-Stream version A, updated: May 11, 2018	A		1.02 MB	May 11, 2018
ec compliance ZR33 version A, updated: May 11, 2018	A		26.4 KB	May 11, 2018
Service Procedures
Temperature calibration methods version A, updated: May 22, 2018	A			May 22, 2018
Service Notes
3DPartsfinder using Solid Works Composer player version A, updated: May 22, 2018	A			May 22, 2018
New style SMOKE DMX PCB version A, updated: May 22, 2018	A			May 22, 2018
Thermocouple colour changes version A, updated: May 22, 2018	A			May 22, 2018