Imagescan
DMX Protocol version 2
Implemented from EPROM version 5
DMX Modes (software version 3.0+) |
|||||
DMX Mode | Vector/Tracking | Pan/Tilt Resolution | DMX Channel Requirements | PL111 Jumper Setting | |
1 (default) | Vector / Tracking | 8 Bit | 7 Channels | No Jumper | |
2 | Vector / Tracking | 16 Bit | 9 Channels | Pin 1 and 3 |
Imagescan DMX Protocol version 2
|
|||
DMX Channel | DMX Value | Description | |
MODE 1 | MODE 2 | ||
1 | 1 | 0 - 9 10 - 138 139 140 - 202 203 - 235 236 - 252 253 - 255 |
Light / Reset fixture / Lamp
Light OFF Light ON (shutter open) Lamp ON No effect Reset fixture Lamp ON Lamp OFF (If and only if all other channels are at 255 - hold for 5 seconds.) |
2 | 2 | 0 - 218 219 - 255 |
Focus Far -> near Near |
3 | 3 | 0 - 4 5 - 94 95 - 184 185 - 199 200 - 249 250 - 255 |
Image Rotation and
Orientation (coarse) Image stop Image rotation CCW, slow to fast Image rotation CW, fast to slow Image stop Image orientation (coarse) Image stop |
4 | 4 | 0 - 255 | Image Orientation (fine) |
5 | 5 | 0 - 255 | Pan MSB (coarse) Left -> right |
- | 6 | 0 - 255 | Pan LSB (fine) Left -> right |
6 | 7 | 0 - 255 | Tilt MSB (coarse) Up -> down |
- | 8 | 0 - 255 | Tilt LSB (fine) Up -> down |
7 | 9 | 0 - 4 5 - 255 |
Pan/Tilt Speed Tracking Fast -> slow (vector) |