JEM Ready 365 Regulator Discontinuation
The series of JEM Ready 365 fixed regulators have been discontinued effective 20/10/2017.
As there are still units in the field and a regulator is required to correctly operate the Ready 365 we advise that a regulator that meets the following criteria be utilized.
Regulator must have an inlet fitting to match the regionalized local CO2 or N2 supply. The output fitting must match the transfer hose supplied with the Ready 365; which is a male BSPP 3/8". The regulator should be set to 30 psi; a higher PSI can result in the failure of the transfer hose and a lower setting will cause a 'Gas Low' error on the Ready 365.