Last Updated: Jan 17
- IMPORTANT: once version 2.0.0 is installed, the fixture will no longer accept upload of earlier firmware versions
- Extended RDM enabled.
- Gobo X-fading enabled.
- Fixed data buffer overflow that could cause fixture to freeze.
- Gobo wheel scroll speed decreased.
- Color wheel speeds and acceleration aligned with other MAC Vipers.
- Dimmer linearization aligned with MAC Viper Profile, for nicer look.
- Dimmer position set correct, which was not always the case after power-up.
- Improved movement during fast pan/tilt snaps.
- Pan/Tilt reset made more robust.
- Random Strobe startup randomized across fixtures.
- Auto blackout deployment synchronized across fixtures.
- Beam smoothing is disabled for AirFx.
- More robust DMX hot-plugging.
- Control of fans improved resulting in lower noise.
- Temperature warning and cutoff levels adjusted.
- Basic mode setting is now retained after power cycle.
- Shortcut menu Lamp On command now activated by first button push.
- Eliminated possible control panel disabling when showing error/warning messages.
- Now remembers the last quad ray state when in battery mode.