Length:
325mm (12.8in.) including flange bracket
Width:
144 mm (5.6in.)
Height:
69 mm (2.7 in.)
Weight:
2.7 kg (5.95 lbs.)
Control Protocols:
Martin P3, Art-Net or sACN
Protocol detection:
Automatic
Setting and addressing:
Martin P3 System controller or RDM (over Art-Net)-compliant controller
RDM compliance:
ANSI/ESTA E1.20
Art-Net Compliance:
Art-Net 1, 2, 3 and 4; including RDM over Art-Net
sACN Compliance:
ANSI E1.31 - 2016
Martin P3 Compliance:
P3 System Controller Software 6.1.0 or newer
Ethernet Transceiver:
10/100Mbit (with fail-safe bypass)
Firmware update:
Via Ethernet using Martin Companion / P3 System Controller
Device status:
Multicolor status LED
Device test and reset:
Push button to call up local test patterns and reset device
Housing:
Aluminum
Color:
Black
Surface treatment:
Anodized and electrostatic powder- coated
Protection rating:
IP66
Effective Projected Area (EPA):
0.062 m²
Impact resistance:
IK08
Corrosion resistance:
C5 High (ISO 12944-6)
Vibration resistance:
1.0g, Sinusoidal (IEC 60068-2-6), 0,7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
Orientation:
Any
Surface mounting:
Four M6 mounting slots
Truss mounting:
M12 mounting hole for standard rigging clamp
Output:
Output cable tail with connector for Exterior Dot Pro string (Hot-pluggable)
Power input or power & data input:
M20 cable gland
Power thru or power & data thru:
M20 cable gland
Ethernet cable input:
M12 cable gland
Ethernet cable thru:
M12 cable gland
Connection:
Internal terminal blocks for Power and Ethernet
Output voltage :
15 VDC
AC power:
100 - 240 / 277 V nominal, 50/60 Hz
Power supply unit:
Auto-ranging electronic switch-mode
Typical half-cycle RMS inrush current:
2.5 A
Surge protection:
4KV
Maximum current draw:
1.1 A @100 V, 0.9 A @120 V, 0.5 A @230 V, 0.44 A @ 277 V
Max earth leakage:
0.5 mA
Power factor:
0.99 @110 V / 120 V, 0.92 @208 V / 230V, 0.90 @277 V
Maximum Power Consumption:
115 W at full load
Idle:
6 W
Hibernation:
2.5 W
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity. Maximum at full intensity, full white. Idle at zero intensity. Hibernation: zero intensity, wake-up procedure to re-use fixture.
Cooling:
Convection
Maximum ambient temperature (Ta max.):
55° C (131° F)*
Minimum ambient temperature (Ta min.):
-30° C (-22° F)
Total heat dissipation (calculated, +/- 10%):
51 BTU/hr at full load
*Above this temperature, the AC-Feeder regulates output to protect from overheating.
RoHS:
Compliant
REACH:
Compliant
WEEE:
Compliant
Proposition 65:
Compliant
FSC:
Certified cardboard inlay and outer box
EU safety:
EN 62368-1
EU EMC:
EN55032, EN55035, EN61000-3-2, EN61000-3-3
US safety:
UL 62368-1
US EMC:
FCC 47 CRF § 15 Class A
Canadian safety:
CSA C22.2 No. 62368-1
Canadian EMC:
ICES-003 Class A
Australia/NZ:
RCM
Martin P3-175 System Controller:
P/N MAR-90721100
Martin P3-275 System Controller:
P/N MAR-90721101
Martin P3-PC System Controller:
Free download from martin.com
Martin Companion Software:
Free download from martin.com
Exterior Dot-1 Pro, 115mm, 100pcs, 2m lead-in:
P/N MAR-90580000
Exterior Dot-4 Pro, 200mm, 64 pcs, 2m lead:
P/N MAR-90580001
Exterior Dot-9 Pro, 400mm 36pcs 2m lead:
P/N MAR-90580002
Hybrid PDE-PDE Cables-1m (3.2 ft.):
P/N 91616001
Hybrid PDE-PDE Cables-2.5m (8.2 ft.):
P/N 91616002
Hybrid PDE-PDE Cables-5m (16.4 ft.):
P/N 91616003
Hybrid PDE-PDE Cables-10m (32.8 ft.):
P/N 91616004
Hybrid PDE-PDE Cables-25m (82 ft.):
P/N 91616005
PDE Cable Power-DMX-Ethernet Rental 100m (328 ft.):
P/N 91616006
Bulk Hybrid PDE Connectors-Male:
P/N 91611701
Bulk Hybrid PDE Connectors-Female:
P/N 91611702
PDE Cable tail Set:
P/N MAR-90580025
Exterior AC-Feeder:
P/N MAR-90580003
バージョン B,
更新: 2025年2月
コンサルタントサポート