Robocolor II
DMX Protocol version 1
Implemented from first EPROM version
NOTE: The Robocolor II with 6 way address DIP-switch, can only be operated via DMX-512 if using the Martin DMX-Interface. However, the Robocolor IIX has direct DMX reception (current version).
Product selection DIP-switch | 3 |
DMX channel requirements, reduced DMX | 5 channels |
DMX channel requirements, full DMX | 6 channels |
Robocolor
II DMX Protocol version 1
|
|||
DMX channel offset | DMX value | Effect | |
Reduced DMX | Full DMX | ||
0 | 0 | 0 - 5 6 - 40 41 - 80 81 - 120 121 - 252 253 - 255 |
Lamp On / Off, Stand-Alone,
Strobe, Reset Fixture Lamp Off Lamp On Stand-Alone Music Stand-Alone Auto Strobe on (Fast -> Slow) Reset fixture When using the strobe function each head will strobe on the current color position and one position backwards. To program a white strobe, all heads must be set to white. Please note that color positioning while strobing is disabled in full DMX mode. Please note that when running stand-alone the Robocolor II will not respond to any other commands. |
1 - 4 | 1 - 4 | 0 - 9 10 - 19 20 - 29 30 - 39 40 - 49 50 - 59 60 - 69 70 - 79 80 - 89 90 - 99 100 - 109 110 - 119 120 - 129 130 - 139 140 - 149 150 - 159 160 - 169 170 - 179 180 - 189 |
Colors (Head 1 - 4) Black Black / White White White / Magenta Magenta Magenta / Pink Pink Pink / Red Red Red / Orange Orange Orange / Dark Yellow Dark Yellow Dark Yellow / Yellow Yellow Yellow / Light Green Light Green Light Green / Green Green |
1 - 4 | 1 - 4 | 190 - 199 200 - 209 210 - 219 220 - 229 230 - 239 240 - 255 |
Colors continued (Head 1 - 4) Green / Cyan Cyan Cyan / Light Blue Light Blue Light Blue / Dark Blue Dark Blue |
- | 5 | 0 - 255 | Color Speed Fast -> Slow |