Inground 200 luminaires are available with straight (flush-fitting) or bevelled (raised) trim rings. The two trim ring types require two different installation sleeves. The current Martin Architectural Outdoor Lighting Product Guide shows the two different installation sleeves with their part numbers on page 45, but the Inground 200 Installation Guide Revision C does not explain which sleeve to use with which trim ring.
Full information will be included in the Installation Guide Rev. D, but in the meantime here is the relevant information:
- For a flush-fitting installation (trim ring and top glass at the same level as the surrounding surface), order installation sleeve P/N 91611215 and an Inground with a straight, flush-fitting trim ring.
- For a bevelled installation (trim ring and top glass slightly raised compared to the surrounding surface), order installation sleeve P/N 91611194 and an Inground with a bevelled trim ring.
Two drawings with cross-sectional views of the two configurations can be found here:
Flush mounted Inground in sleeve.pdf
Bevelled edge Inground in sleeve.pdf
Full information will be included in the Installation Guide Rev. D, but in the meantime here is the relevant information:
- For a flush-fitting installation (trim ring and top glass at the same level as the surrounding surface), order installation sleeve P/N 91611215 and an Inground with a straight, flush-fitting trim ring.
- For a bevelled installation (trim ring and top glass slightly raised compared to the surrounding surface), order installation sleeve P/N 91611194 and an Inground with a bevelled trim ring.
Two drawings with cross-sectional views of the two configurations can be found here:
Flush mounted Inground in sleeve.pdf
Bevelled edge Inground in sleeve.pdf