Exterior Wash 210

Exterior™ Wash 210 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate mid-sized structures and building facades. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 210 is designed for superior color mixing applications and is based on quad-color premixed LEDs.

  • Uniform color mixing with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display


  • Powerful premixed LEDs
  • Up to 4900 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0–100% intensity control

Tech specs

Physical Length: 270 mm (10.7 in.) Width: 334 mm (13.2 in.) Height: 382 mm (15.1 in.) Weight: 13.0 kg (28.7 lbs.)
Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW
Control and Programming Control systems: DMX, RDM DMX channels: 4 Setting, addressing, standalone programming: Control panel with OLED display Receiver: RS-485 Firmware update: Serial upload via DMX link DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20
Optics Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Light source: 19 x RGBW quad-color LEDs LED manufacturer: Cree Beam angle options No diffuser: 10.5° Narrow diffuser: 14° Medium diffuser: 24° Wide diffuser: 43° Very wide diffuser: 63° Asymmetric diffuser: 61° x 16° *Figure obtained under manufacturer's test conditions:
Photometric Data Total luminous output: 4900 lumens
Construction Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Color: Light grey (white, black or other colors available on request) Housing: Cast aluminum Effective Projected Area (EPA): 0.1 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) RoHS compliant
Installation Orientation: Any Mounting: Adjustable yoke Vertical aiming: TBA Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power consumption, steady state, all LEDs at zero intensity: 3 W Maximum total power consumption: 165 W Typical half-cycle RMS inrush current: 10.3 A Surge protection: 4 KV
Typical Power and Current 100 V, 60 Hz: 1.5 A, 148 W, PF 0.99 120 V, 60 Hz: 1.25 A, 146 W, PF 0.99 230 V, 50 Hz: 0.7 A, 146 W, PF 0.95 277 V, 60 Hz: 0.6 A, 146 W, PF 0.88 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F) Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below -20° C (-4° F) Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F) Total heat dissipation (calculated, +/- 10%): 485 BTU/hr
Approvals EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: C-TICK N4241 / RCM
Included Items Power cable: Cable tail, 1.8 m (5.9 ft.), external diameter 9.5 mm (0.38 in.), installed Data cable: Cable tail, 1.8 m (5.9 ft.), external diameter 6.5 mm (0.26 in.), installed
Accessories Optical: Exterior Wash 200 Series, narrow diffuser kit: P/N 91610154 Exterior Wash 200 Series, medium diffuser kit: P/N 91610153 Exterior Wash 200 Series, wide diffuser kit: P/N 91610152 Exterior Wash 200 Series, very wide diffuser kit: P/N 91610151 Exterior Wash 200 Series, asymmetric diffuser kit: P/N 91610150 Exterior Wash 200 Series, glare shield / snoot: P/N 91611745
Related Items Martin USB interface box incl. cables: P/N 90758090 M-PC 2U™ incl. Martin M-DMX Interface Box and USB cable: P/N 90737070
Ordering Information Exterior Wash 210, 10°, EU, aluminum: P/N 90509088 Exterior Wash 210, 10°, US, aluminum: P/N 90509095