MAC Encore Wash CLD

Designed to produce rich color and premium white light in a wide variety of applications where light quality is critical, the MAC Encore™ Wash CLD is an LED-based alternative to the MAC Viper Wash DX. The feature-packed soft edge moving head offers unparalleled 6000 K crisp, neutral daylight, and doubles as a modern replacement for generic fixtures like HMI based Fresnel fixtures, with the additional benefit of color mixing and movement.

  • Unparalleled 6000 K cold white light quality
  • Super silent cooling and effects operation
  • Best-in-class size/weight/performance ratio

 

Features

  • Pure white LED engine with 6000 K CCT.
  • No color temperature variation during zoom and dimming.
  • Flicker-free operation—LED driver frequency suitable for all camera applications.
  • Whisper-silent—Combines convection and forced air cooling with user-selectable output vs. sound level control.
  • Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
  • Vibrant CMY color mixing with a superior palette of colors ranging from rich, saturated primary colors to light and smooth pastel shades.
  • Variable CTO—daylight to tungsten CCT control and expansion of the CMY palette that stays true to the black body curve.
  • Color wheel—6 interchangeable dichroic filters + open.
  • Fresnel lens: 1:4 zoom—precise, silent and fast zoom.
  • PC lens (optional): 1:5 zoom—precise, silent and fast zoom.
  • Internal barndoor system with two shutter blades and iris. Shutter blades can overlap for full blackout and the entire system rotates +/- 100°. Repeats cues with great precision.
  • Precise and tight iris with adjustable dynamic effects.
  • Animotion™ FX System—Internal dimming effect macros for stunning 3D mid-air and projection effects.
  • Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
  • Compact size—L: 452 x W: 480 x H: 745 mm / L: 17.8 x W: 18.9 x H: 29.3 in.
  • Low weight—28.5 kg/62.9 lbs
  • Foam rubber (SIP) flight case insert for secure shipment. 

References

Tech specs

Physical Length: 452 mm (17.8 in.) Width (across yoke): 480 mm (18.9 in.) Height (maximum): 755 mm (29.8 in.) Height (head straight up): 745 mm (29.4 in.) Weight: 28.5 kg (62.9 lb.) Minimum center-to-center distance in side-by-side installation: 730 mm (28.8 in.)
Dynamic Effects Color mixing: CMY, independently variable 0 - 100% Color temperature control: Variable 6000 - 2700 K Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color Barn doors: Internal, two blades with individually controllable insertion, +/- 100° module rotation Iris: Variable 0 - 100% Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout Dimming options: Choice of four dimming curves Pre-programmed effects: Two ranges of FX, independent or synchronized/combined Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity Zoom: Motorized Pan: 540° Tilt: 268° Position correction system: Absolute position monitoring
Control and Programming DMX channels: 24 Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX 16-bit control: Dimming, pan and tilt Movement control options: Tracking and vector Fixture identification: User-settable ID number DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485 Fixture software update: USB memory device or over DMX link
Optics Light source: 6000 K white LEDs Total LED engine power: 468 W Minimum LED lifetime: 50 000 hours (to >80% luminous output)* Zoom range with Fresnel lens (standard): 14° - 60° one-tenth peak (1:4) Zoom range with PC lens (optional): 11° - 58° one-tenth peak (1:5) *Figure obtained under manufacturer's test conditions
Photometric Data Light engine luminous output: ≥ 39 400 lumens Fixture luminous output with Fresnel lens (standard): 11 000 lumens Fixture luminous output with PC lens (optional): 12 000 lumens CRI (Color Rendering Index): >80 CQS (Color Quality Scale): >80 TM-30 Rf (IES TM-30-15 Fidelity Index): >80 TM-30 Rg (IES TM-30-15 Gamut Index): >96 TLCI (Television Lighting Consistency Index): >70
Construction Color: Black Housing: High-impact flame-retardant thermoplastic Protection rating: IP20
Installation Mounting points: 4 pairs of 1/4-turn locks Location: Dry location only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m (8 in.) Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)
Connections AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector) DMX and RDM data in/out: 5-pin locking XLR
Electrical AC power: 120-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Power consumption, all effects static, zero light output: 64 W Half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
Typical Power and Current 120 V, 60 Hz: 5.0 A, 596 W, PF 0.998 208 V, 60 Hz: 2.9 A, 581 W, PF 0.988 230 V, 50 Hz: 2.6 A, 580 W, PF 0.981 240 V, 50 Hz: 2.2 A, 585 W, PF 0.979 Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor
Thermal Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels) Maximum surface temperature, steady state, Ta=40° C: 75° C (167° F) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
Approvals EU safety: EN 60598-2-17, EN 62471, EN62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-11, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA C22.2 No. E598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: RCM
Included Items Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
Accessories PC (planoconvex) Lens for MAC Encore Wash: P/N TBA Cables and connectors Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797 Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786 Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173 Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174 Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789 Installation hardware G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003 Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007 Half-coupler Clamp: P/N 91602005 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007 Flightcases Two-unit Flightcase for MAC Encore™*: P/N 91515048 *Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts
Related Items Martin® M-PC 2U incl. Martin® M-DMX USB-DMX Interface : P/N 90737070 Martin® M-PC Pro-64 / LJ-4 Controller Kit incl. Martin® M-DMX USB-DMX Interface: P/N 90737060 Martin® RDM 5.5 Splitter: P/N 90758150
Ordering Information MAC Encore™ Wash CLD EPS (in cardboard box, polystyrene packaging): P/N 90234040 MAC Encore™ Wash CLD SIP (in cardboard box with SIP foam flightcase insert): P/N 90234045