MAC Quantum Profile

This extremely bright LED profile fixture combines top-quality white light with a fast, smooth CMY color mixing system and crisp gobo projection on surfaces as well as mid-air.

With all this and the new Animotion™ FX system that allows never-before seen beam animations, the market is now finally seeing the first real 700/800 W discharge lamp replacement in a profile fixture that effectively harnesses cutting-edge LED technology.

  • First real alternative to a 700/800 watt HID fixture
  • Flat field, crisp image, high contrast
  • Full feature set including CMY color mixing and 1:3 zoom

Find PDF Technical

  • First real alternative to a 700/800 watt HID fixture
  • Flat field, crisp image, high contrast
  • Full feature set including CMY color mixing and 1:3 zoom
  • Very low weight and compact design
  • Super high-speed movements and effects
  • Consistent photometric performance via latest LED technology
Physical Length: 452 mm (17.8 in.) Width (across yoke): 431 mm (17.0 in.) Height (head straight up): 642 mm (25.3 in.) Height (maximum): 648 mm (25.5 in.) Weight: 23.2 kg (51.1 lbs.)
Dynamic Effects Color mixing: CMY, independently variable 0 - 100% Color wheel: 6 color filters plus open Rotating gobo wheel: 6 interchangeable gobos plus open, wheel rotation, gobo rotation, indexing and shake Static gobo wheel: 10 gobos plus open, wheel indexing, rotation and shake Beam effects: Rotating three-facet prism Zoom: Motorized Focus: Motorized, with zoom-focus tracking Iris: 0 - 100%, pulse effects Shutter effect: Electronic, with variable speed regular and random strobe Electronic dimming: Four dimming curve options Pan: 540° Tilt: 268° Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming Control system: DMX RDM: Implemented Control resolution: 8-bit, with 16-bit control of dimming, gobo indexing, zoom, focus, pan and tilt DMX channels: 19/27 Setting and addressing: Control panel with backlit graphic display DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: RS-485 Fixture software update: Direct using USB memory stick or via DMX link using Martin USB Duo™ DMX Interface Box
Optics Light source: 475 W LED engine LED refresh rate: 3000 Hz Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Zoom range: 12° - 36° (1:3) Output: 12 700 lumens *Figure obtained under manufacturer´s test conditions:
Construction Color: Black Housing: High-impact flame-retardant thermoplastic Protection rating: IP20
Installation Mounting points: 4 pairs of quarter-turn locks Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m Minimum distance to illuminated surfaces: 2.0 m
Connections AC power input: Neutrik PowerCon DMX and RDM data in/out: 5-pin locking XLR
Electrical AC power: 120-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Maximum total power consumption: 750 W Typical half-cycle RMS inrush current: 10.3 A Typical power consumption, all effects static, zero light output: Approx. 50 W Maximum total power consumption: 750 W Typical half-cycle RMS inrush current: 10.3 A
Typical Power and Current 120 V, 60 Hz: 4.8 A, 576 W, PF 0.999 208 V, 60 Hz: 2.8 A, 568 W, PF 0.991 230 V, 50 Hz: 2.5 A, 565 W, PF 0.988 240 V, 50 Hz: 2.4 A, 565 W, PF 0.988 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:
Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 5° C Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
Approvals EU safety: EN 60598-2-17 (EN 60598-1), EN 62471 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety (pending): UL 1573 US EMC: FCC Part 15 Class A Canadian safety (pending): CSA C22.2 No. E598-2-17 (CSA E60598-1) Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
Included Items Two omega brackets for rigging clamp attachment: P/N 91602001
Accessories 3 m power cable, 12 AWG, SJT, with PowerCon NAC3FCA power input connector: P/N 11541503 Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804 Half-coupler clamp: P/N 91602005 G-clamp: P/N 91602003 Quick trigger clamp: P/N 91602007 Flightcase for 2 x MAC Quantum™: P/N 91510210
Related Items Martin USB Duo™ DMX Interface Box: P/N 90703010 Martin RDM 5.5 Splitter™: P/N 90758150
Ordering Information MAC Quantum Profile™ in cardboard box: P/N 90240000 MAC Quantum Profile™ in 2-unit flightcase: P/N 90240010

Spec Docs

Photometric

Brochures
MAC Quantum Profile
MAC Quantum Profile
Low-res Hi-res
Stage Solutions
Stage Solutions
Download