P3 PowerPort 1000 IP Install

The P3 PowerPort 1000 IP Install is an integrated power supply and data processor for Martin’s range of creative LED video products, including the Exterior PixLine™ and VC-Dots™. When driven by one of Martin’s award-winning P3™ System Controllers™, it combines stable power delivery with high-speed, high-capacity video processing. Setup and configuration are easy and intuitive. A full outdoor rating and optional fiber interface make the product perfect for permanent outdoor installations.

  • Power and data processor for all Martin’s fixed-installation creative LED video products
  • Flexible integration: can be located remotely, indoors or outdoors
  • Easy cabling and configuration


  • P3 image processing technology
  • Set-up and addressing via P3 System Controller family
  • No local configuration needed
  • P3 input and thru to allow daisy-chaining
  • Optional fiber-interface
  • 4 hybrid power/data output ports
  • Wall-mountable or free-standing
  • Can be located up to 50 m away from the creative LED video products
  • IP66


Tech specs

Physical Length: 426 mm (16.8 in.) Width: 483 mm (19.1 in.) Height: 146 mm (5.8 in.) Weight: 8 kg (17.7 lbs.)
Control and Programming Addressing and status: Via P3 System Controller Mapping: Via P3 System Controller Firmware update: Via P3 System Controller
Control/User Interface Device status: Multicolor status LED Power output status: Four LEDs Data output status: Four LEDs Device test and reset: Pushbutton to call up local test patterns and reset device Status LEDs and pushbutton can be disabled remotely if required:
P3 Signal Protocol Signal type: Gigabit Ethernet Protocol: Proprietary Martin P3 Hot pluggable: Yes, electrically isolated at all connections Cable type: Ethernet, CAT 5e or better Cable length: Up to 100 m (328 ft.) between any 2 devices, extendable with Ethernet switch or conversion to fiber
System integration VC-Dot™ family via VC-Feeder™ Exterior PixLine™ family VDO Sceptron™ family VC-Grid™ family (indoor product) VC-Strip™ family (indoor product) Exterior Dot-HP™ family
Construction Protection rating: IP66 NEMA enclosure rating: Type 3 Housing: Aluminum Color: Alu grey (customized colors available on project basis) Effective Projected Area (EPA): 0.21 m2 RoHS compliant
Installation Mounting: Brackets for installation on flat surface Orientation: Any, except with cable glands facing up or lid facing down
Connections Power input: Cable gland (M20), internal screw terminals P3 data in/out: Two cable glands (M16), two internal RJ45 connectors (if copper-to-fiber unit is installed, one cable gland can be used for fiber) Combined power & data out: Four cable glands (M16), internal screw terminals M16 cable glands accept 5.5 - 10 mm cable, M20 glands accept 8-13 mm cable
Electrical AC power: 120-277 V nominal, 50/60 Hz Power supply units: Auto-ranging electronic switch-mode Typical total power consumption: 1000 W (including full load of connected display devices, all at full intensity) Typical half-cycle RMS inrush current at 230 V, 50 Hz: 20.9 A Total power consumption in idle state (at 25° C, all connected devices powered off): 22 W
Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 55° C Minimum ambient temperature (Ta min.): -30° C Total heat dissipation (calculated, +/- 10%): 345 BTU/hr. (not including display devices but with system at full load)
Approvals EU safety: EN 60950 EU EMC: EN 55032, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 60950-1 Canadian safety: CSA C22.2 No. 60950-1
Included Items Cable glands
Related Items P3-050 System Controller: P/N 90721090 P3-100 System Controller: P/N 90721010 P3-150 System Controller: P/N 90721015 P3-200 System Controller: P/N 90721020 P3-300 System Controller: P/N 90721060 P3-PC System Controller: P/N 90721030 P3-PC License Code: P/N 39808028
Ordering Information Martin P3 PowerPort™ 1000 IP, Installation Model: P/N 90721080