The RUSH MH 6 Wash CT is designed for key lighting applications within the House of Worship, Performing Arts and Live Stage environments where color temperature control of white light is critical but also a compact and light weight design is desired for smaller applications

The RUSH MH 6 WASH CT is a bright single-lens LED moving head with fully premixed white color temperatures. With twelve 10W WW/CW (warm white and cold white) LEDs and a 10° to 60° motorized zoom, it offers full electronic dimming and variable strobe effects controlled via DMX.

  • Pre mixed white light ranging from 2,700K to 7,800K    
  • 10-60 Degree Zoom System
  • Compact and Lightweight Design


  • 2,700K to 7,800K Color Temp Range
  • Allows key lighting to be matched for multiple sources from Tungsten to Metal Halide
  • 10-60 Degree Zoom System
  • Compact and lightweight design
  • Can be used as a Mid effect with a tight beam look to washing a stage for key lighting applications

  • Ideal for applications that have limited ceiling height or weight restrictions.


Tech specs

Physical Length: 290 mm (11.4 in.) Width: 189 mm (7.4 in.) Height: 360 mm (14.2 in.) Weight: 7.1 kg (15.7 lbs.)
Dynamic Effects Color temperature: 2700 K - 7800 K Color temperature presets: 2700 K to 7800 K in ~100 K steps Electronic dimming: 16-bit, 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic 'shutter' effect: Instant open and blackout Zoom: Motorized, 10 - 60° Pan: 540°, 16-bit control Tilt: 220°, 16-bit control
Control and Programming Control options: DMX DMX channels: 12 16-bit fine control: Dimming, pan and tilt DMX address setting: Control panel with LCD display DMX compliance: USITT DMX512/1990
Optics Light source: 12 x 10 W CWUW LEDs Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Zoom range: 10° - 60° *Figure obtained under manufacturer's test conditions:
Construction Housing: High-impact flame-retardant thermoplastic Color: Black Ingress protection rating: IP20
Installation Mounting points: One quarter‐turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to illuminated surfaces: 200 mm (8 in.) Minimum distance to combustible materials: 100 mm (4 in.) Minimum clearance around fans and vents: 100 mm (4 in.)
Connections AC power input: Neutrik PowerCon AC power throughput: Neutrik PowerCon DMX data in/out: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 3.15 A Recommended Miniature Circuit Breaker*: Type D * Per IEC 60898/UL489/CSA C22.2 No. 5: Power consumption figures are typical, not maximum. Allow for +/-10% variation.:
Typical Power and Current 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94 Typical half-cycle RMS inrush current at 240 VAC: 11.3 A Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:
Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)
Approvals EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573, UL 8750 US EMC: CFR Title 47 Part 15 Canadian safety: CSA C22.2 No. 166 Australia/NZ: C-TICK N4241 / RCM
Included Items Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug Omega bracket for rigging clamp attachment
Accessories Cables Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511 Power connectors Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804 Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805 DMX link DMX termination plug, 3-pin male XLR: P/N 91613017 Installation hardware Half-coupler clamp: P/N 91602005 G-clamp: P/N 91602003 Quick-trigger clamp: P/N 91602007 Safety cable, safe working load 50 kg: P/N 91604003
Related Items RUSH™ Software Uploader 1: P/N 91611399
Ordering Information RUSH™ MH 6 Wash CT in cardboard box: P/N 90280090