RUSH Strobe 1 5x5

This white strobe/blinder is a 5 x 5 LED matrix panel with individually-controllable LEDs. Controllable via multiple DMX options or sound activated, it includes preprogrammed effect, letter and number macros for easy-to-produce graphics and messaging. Panels link via an integrated horizontal and vertical locking mechanism.


Find PDF

  • White LED strobe/blinder
  • 5 x 5 matrix panel
  • Individually controllable LEDs
  • Preprogrammed macros (effects, letters, numbers, etc.)
  • Linkable - integrated horizontal and vertical locking
  • DMX or sound activated
  • Multiple DMX control options
  • 3 & 5 pin XLR
Physical Length: 500 mm (19.7 in.) Width: 101 mm (4.0 in.) Height: 500 mm (19.7 in.) Weight: 9.5 kg (20.9 lbs.)
Dynamic Effects Strobe effect: Electronic, with regular and random pulse, burst and strobe effects Pre-programmed effects: Effect, letter and number display macros Electronic dimming: 0 - 100% continuous, individually dimmable pixels Effects orientation: Standard or inverted 180°
Control and Programming Control options: DMX, stand-alone DMX channels: 4/25/29 Stand-alone trigger options: Music trig, auto trig Stand-alone sequences: 8 pre-programmed shows or random show Stand-alone memory: 20 scenes Setting and addressing: Control panel with LED display DMX compliance: USITT DMX512/1990
Optics Light source: 25 x 5 W Cree cool white LEDs Color temperature: 6000 - 6500 K Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer´s test conditions:
Construction Color: Black Housing: Steel Protection rating: IP20
Installation Location: Indoor use only, must be fastened to surface or structure Mounting points: Integral hanging brackets (removable), side-by side mounting locks Orientation: Any
Connections AC power in/thru: Neutrik PowerCon DMX data in/out: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Typical total power consumption: 148 W Power consumption figures are typical, not maximum. Allow for +/-10% variation.:
Typical Power and Current 110 V, 60 Hz: 2.0 A, 148 W 230 V, 50 Hz: 1.2 A, 146 W Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:
Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%): 510 BTU/hr.
Approvals EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US EMC: 47 CFR Part 15 Class A Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
Included Items Power cable 1.5 m Mounting brackets incl. screws
Accessories Cables, 16 A, for connection to power in chains: Power input cable, 14 AWG, UL, SJT, 1.5 mm2 , H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2 , H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2 , H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511 Power connectors: Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804 Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805
Related Items RUSH™ Software Uploader 1: P/N 91611399
Ordering Information RUSH Strobe 1 5x5™ in cardboard box: P/N 90480020

Spec Docs

Brochures
RUSH Strobe 1 5x5 Specification
RUSH Strobe 1 5x5 Specification
Low-res Hi-res
Images