RUSH Strobe CWL

This bright and compact LED linear strobe utilises 99 x 3 W Cree XP-D LEDs with a reflector design that offers a traditional Xenon strobe look with a 17,000 lumen output. From a single flash to a blinder effect, the RUSH™ Strobe CWL is the perfect companion for mobile DJs, lounge bars, venues and cruise ships. 

  • 99 x Cree XP-D 3 W cold white LEDs
  • Reflector design
  • 1-25 FPS and blinder effect

Features

  • Compact LED linear strobe
  • 17,000 lumens output
  • Color system: 99 x cold white LED
  • 87° beam angle 
  • 8 strobe macros

References

Tech specs

Physical Length: 505 mm (19.9 in.) Width: 140 mm (5.5 in.) Height: 226 mm (8.9 in.) Weight: 4.0 kg (8.9 lbs.)
Dynamic Effects Strobe rate: 0 - 25 Hz Strobe duration: 0 - 10 ms (50 Hz supply), or 0 – 8.3 ms (60 Hz supply) Blinder effect: Continuous with auto fade Special effects: Ramp up/down, up-down, random flash, lightning, blinder, single flash
Control and Programming Control options: DMX, stand-alone, master/slave, sound trigger DMX channels: 1 or 4 Setting and addressing: Control panel with LCD display Compliance: USITT DMX512/1990
Optics Beam angle: 87° Light source: 99 x 3 W CREE white XB-D LED Color temperature: 7000-8000 K Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under test conditions:
Construction Color: Black Housing: Steel and aluminum Protection rating: IP 20
Installation Mounting points: Bracket with 13.5 mm holes Orientation: Any Location: Indoor use only, must be fastened to surface or structure Minimum distance to illuminated surfaces: 0.2 m (8 in.) Minimum distance to combustible materials: 0.1 m (4 in.) Minimum clearance around fans and vents: 0.1 m (4 in.)
Connections AC power in/thru: Neutrik PowerCon DMX data in/thru: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Diode bridge
Typical Power and Current 110 V, 60 Hz: 2.5 A, 250 W, PF 0.9 230 V, 50 Hz: 2.7 A, 380 W, PF 0.6 Measurements made at nominal voltage. Allow for a deviation of +/-10%.: PF = Power Factor:
Thermal Cooling: Forced air (temperature regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min): 0° C (32° F)
Approvals EU safety: EN 60598-2-17 (EN 605981-1) EU EMC: EN 55015, EN55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA 22.2 No. 166 Australia/NZ: C-Tick N4241
Included Items EU version: 1.5 m (5 ft.) power cable without mains plug, mounting bracket US version: 1.5 m (5 ft.) power cable with mains plug, mounting bracket
Accessories Power cables, 16 A, for connection to power in chains: Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511 Power connectors: Neutrik PowerCon NAC3FCA female connector for power in, cable mount, blue: P/N 05342804 Neutrik PowerCon NAC3FCB male connector for power out/thru, cable mount, light grey: P/N 05342805 DMX link DMX termination plug, 3-pin male XLR: P/N 91613017 Installation hardware: Four-unit bracket for RUSH Strobe CWL: P/N 91606019 Half-coupler clamp: P/N 91602005 G-clamp: P/N 91602003
Related Items RUSH™ Software Uploader 1: P/N 91611399
Ordering Information RUSH™ Strobe CWL EU model in cardboard box: P/N 90480110 RUSH™ Strobe CWL US model in cardboard box: P/N 90480115

Downloads