Martin MAC 101 CLD

拡大画像

The MAC 101 CLD uses pure cold LEDs for applications where only higher color temperatures are required and is intensity controllable.

The ultra-compact MAC 101 LED moving head wash is available in three white light versions that expand its use to applications where high quality, pure white light is needed. Ideal for highlighting skin tones, textiles, or set pieces, the MAC 101 variants incorporate cold and/or warm LEDs instead of RGB for a better white light quality and greater output.

High quality cold white LED light
Ideal for highlighting skin tones, textiles or set pieces
Variable color temperature

特長

High quality cold white LED light
Ideal for highlighting skin tones, textiles or set pieces
Variable color temperature
Tight and punchy beam effects, long throw, modern ACL replacement
Multiple field angle options for a perfect wash via optional diffusers
Incredibly fast and precise movement
Ultra-compact, low weight design (3.7 kg)
Less than 125 watt total power requirement

より詳しい情報はこちら

Physical Length: 241 mm across yoke Width: 241 mm across yoke Height: 304 mm Weight: 3.7 kg

Dynamic Effects Shutter effect: Electronic, with pulse and random effects Electronic dimming: 0 - 100%, four dimming curve options Pan: 540° Tilt: 240° Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming Control: DMX RDM: Implemented Control resolution: 8-bit, with 16-bit control of pan & tilt DMX channels: 7 Setting and addressing: Control panel with backlit graphic display Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM Transceiver: RS-485 Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box

Optics Light source: Cree XP-E high power emitters Color temperature: 6700 K Minimum LED lifetime: 50 000 hours (to >70% luminous output)* LED refresh rate: 1220 Hz *Figure obtained under manufacturer´s test conditions:

Construction Color: Black or white Housing: High-impact flame-retardant thermoplastic Protection rating: IP20

Installation Mounting points: One M12 threaded hole for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm from head, no minimum distance from base Minimum distance to illuminated surfaces: 200 mm

Connections AC power input: Neutrik PowerCon AC power throughput: Neutrik PowerCon DMX data in/out: 5-pin locking XLR

Electrical AC power: 100-240 V nominal, 50/60 Hz Maximum total power consumption: 123 W Power supply unit: Auto-ranging electronic switch mode Main fuse: 5 AT (slow blow) Typical power consumption, all effects static, zero light output: <25 W

Typical Power and Current 100 V, 50 Hz: 122 W, 1.3 A, PF 0.991 120 V, 60 Hz: 121 W, 1.1 A, PF 0.987 208 V, 60 Hz: 123 W, 0.7 A, PF 0.938 230 V, 50 Hz: 123 W, 0.6 A, PF 0.915 240 V, 50 Hz: 123 W, 0.6 A, PF 0.900 PF = power factor: Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:

Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 5° C Total heat dissipation (calculated, +/- 10%): 420 BTU/hr.

Approvals EU safety: EN 60598-2-17, EN 62471 EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA E598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241

Included Items M12 bolt suitable for use with Martin rigging clamps: User manual: 35000246

Accessories 3 m power cable, 12 AWG, SJT, with PowerCon NAC3FCA power input connector: TBA Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: 05342804 Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: 05342805 Set of eight narrow diffusers for MAC 101: 91616023 Set of eight wide diffusers for MAC 101: 91616018 Set of 4 top hats for MAC 101: 91611358 Set of 5 quick-mount surface mounting brackets for MAC 101: 91606017 G-clamp: 91602003 Quick trigger clamp: 91602007 Safety cable, safe working load 50 kg: 91604003 8-unit flightcase for MAC 101™: 91515010 Half-coupler (tube) clamp: 91602005

Related Items Martin USB Duo™ DMX Interface Box: 90703010 Martin RDM 5.5 Splitter™: 90758150

Ordering Information MAC 101 CLD™ in cardboard box: 90231670 MAC 101 CLD™ in 8-unit flightcase: 90231660

ダウンロード

Manuals

	バージョン	言語	サイズ	アップロード日
MAC 101 Serie - Bedienungsanleitung バージョン G, 更新: 2018年5月	G		793KB	2018年5月
MAC 101 Series - User Manual バージョン G, 更新: 2018年5月	G		880KB	2018年5月
Série MAC 101 - Manuel d´utilisation バージョン G, 更新: 2018年5月	G		1020KB	2018年5月

CAD Drawings

	バージョン	言語	サイズ	アップロード日
MAC 101 - Head Horizontal (3DS) バージョン A, 更新: 2018年5月	A		2.17MB	2018年5月
MAC 101 - Head Vertical (3DS) バージョン A, 更新: 2018年5月	A		2.3MB	2018年5月

Compliances

	バージョン	言語	サイズ	アップロード日
MAC 101 / Aura / Aura XB - ETL Authorization to Mark バージョン D, 更新: 2018年5月	D		621KB	2018年5月
MAC 101 - EU Declaration of Conformity バージョン B, 更新: 2018年5月	B		311KB	2018年5月

Software

	バージョン	サイズ	アップロード日
MAC101 CLD_Main CPU software バージョン 1.0.0, リリース日: 2018年5月	1.0.0	87KB	2018年5月

Service Notes

	バージョン	言語	サイズ	アップロード日
Installing MAC 101 Series diffuser filters バージョン A, 更新: 2018年5月	A			2018年5月
MAC 101 / Aura / Aura XB - Mounting Bracket Installation バージョン B, 更新: 2018年5月	B		441KB	2018年5月
3D Partsfinder - Opening using Solid Works Composer Player バージョン 4, 更新: 2020年10月	4		743KB	2020年10月

Hints and Tips

	バージョン	言語	サイズ	アップロード日
Avoiding damage from sunlight and other light sources バージョン B, 更新: 2018年5月	B			2018年5月