Exterior Linear Pro Graze CTC

Apparecchio lineare da esterno per illuminazione radente con controllo della temperatura di colore

I Martin Exterior Linear Pro Graze CTC sono apparecchi architettonici a LED flessibili e compatti. Grazie a una distribuzione luminosa uniforme con angolo di fascio di 9 gradi, sono ideali per valorizzare superfici materiche, pareti, facciate, soffitti e altre superfici in stadi e arene, navi da crociera, parchi a tema, hotel, casinò, ponti, tunnel o altre installazioni permanenti in interni ed esterni.

Dotati di un controllo della temperatura di colore altamente efficiente (2700K, 4000K, 6500K), di un elevato indice di resa cromatica (CRI) e di 12 LED/ft, i modelli Graze CTC offrono un potente flusso luminoso di 800 lm/ft. Ricchi di funzioni intelligenti, i Graze CTC includono molteplici modalità di alimentazione, Remote Device Management (RDM), regolazione semplice del flusso luminoso totale per ridotti consumi energetici, controllo DMX e installazione facilitata grazie all'alimentatore universale integrato.

Con grande attenzione alla sostenibilità, questi apparecchi possono essere collegati in cascata tramite un connettore combinato di alimentazione e dati, consentendo lunghe catene di apparecchi per infrastrutture più semplici. La facilità di modifica dell'angolo di fascio semplifica le variazioni di progetto dell'ultimo minuto e le regolazioni in loco, mentre l'intelligente design della piastra di montaggio consente di adottare un'ampia gamma di soluzioni di staffaggio standard o personalizzate.

Il design sottile di questi apparecchi ne facilita l'integrazione negli elementi architettonici, con minori requisiti strutturali. Tutti i modelli sono disponibili in lunghezze lineari da 1ft o 4ft e vengono spediti in imballaggi certificati FSC.

  • EASE OF INSTALLATION

    The slim and low weight design makes them easier to integrate into architectural elements discreetly and with less structural requirements. They have flexible change-of-beam angles for late design changes and on-site adjustments. A smart mounting plate design offers a variety of standard or custom bracket solutions.

  • SMART INFRASTRUCTURE

    Fixtures are DMX-controllable and easy to install due to their integrated universal power supply. They can also be daisy-chained using a combined power and data connector, which enables long fixture runs and more simple infrastructures.

  • CONTROLLO SUPERIORE DELLA TEMPERATURA COLORE

    Sono inclusi LED freddi, neutri e caldi per un controllo preciso della temperatura colore da 2700K a 6500K ad alta efficienza con 12 LED/ft. Inoltre, presentano un elevato indice di resa cromatica (CRI) che copre l'intero spettro di temperatura colore.

  • EFFICIENT OPERATION

    With more than 60 lm/W, Exterior Linear Pro CTC fixtures are highly efficient. Multiple power modes (12W/10W/5W, including ASHRAE compliance) can be set via Remote Device Management (RDM) to reduce power consumption as needed.

featured content

EASE OF INSTALLATION

The slim and low weight design makes them easier to integrate into architectural elements discreetly and with less structural requirements. They have flexible change-of-beam angles for late design changes and on-site adjustments. A smart mounting plate design offers a variety of standard or custom bracket solutions.

featured content

SMART INFRASTRUCTURE

Fixtures are DMX-controllable and easy to install due to their integrated universal power supply. They can also be daisy-chained using a combined power and data connector, which enables long fixture runs and more simple infrastructures.

featured content

CONTROLLO SUPERIORE DELLA TEMPERATURA COLORE

Sono inclusi LED freddi, neutri e caldi per un controllo preciso della temperatura colore da 2700K a 6500K ad alta efficienza con 12 LED/ft. Inoltre, presentano un elevato indice di resa cromatica (CRI) che copre l'intero spettro di temperatura colore.

featured content

EFFICIENT OPERATION

With more than 60 lm/W, Exterior Linear Pro CTC fixtures are highly efficient. Multiple power modes (12W/10W/5W, including ASHRAE compliance) can be set via Remote Device Management (RDM) to reduce power consumption as needed.

Video

 

 

Caratteristiche

  • LED bianchi caldi, neutri e freddi (2700K, 4000K, 6500K) (12 LED/ft)
  • Angolo di fascio ristretto di 9°
  • Pellicola micro-lente intercambiabile per angoli di fascio alternativi
  • Modalità di segmentazione selezionabili (1, 4 o 8 segmenti)
  • Consumo energetico selezionabile (12W/10W/5W) per piede
  • La modalità di potenza da 5W/ft è conforme agli standard ASHRAE per l'illuminazione lineare di facciate 
  • Alimentatore (PSU) integrato multi-tensione 100-277V per lunghe serie di apparecchi
  • Connettore ibrido alimentazione e dati per semplici configurazioni in daisy chain
  • Controllo DMX e RDM
  • Interruttore magnetico integrato per la diagnostica locale
  • Involucro robusto IP66 progettato per installazioni permanenti in esterni
  • Peso ridotto: 0,8 kg/ft (1,9 lbs/ft)
  • Design compatto - larghezza di 40mm (1,57 pollici)

Specifiche

  • Physical Width: 40 mm (1.57 inch.) Height: 68 mm (2.67 inch) Length - 1 ft Version: 312mm (1.02 ft) Length - 4 ft Version: 1227mm (4.02 ft) Weight - 1 ft Version: 0.85 kg (1.9 lbs) Weight - 4 ft Version: 2.8 kg (6.2 lbs)
    Dynamic Effects Intensity: 0 - 100% Color temperature control: 2700 K – 6500 K Segment Control: 0.5ft, 1 ft or full 4 ft fixture control
    Control and Programming Control systems: DMX, RDM User interface: Magnetic button to call up fixture status and test fixture Stand-alone control: Up to 20 scenes with individual fade/hold times Control resolution: 8-bit DMX individual color control Dimmer Resolution: 16-bit DMX control of intensity DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20 DMX channels 4ft: 3/3/12/24 (standard/1 seg/4 seg/8 seg) DMX channels 1ft: 3/6/3 (standard/1 seg/2 seg)
    Optics Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse) Beam angle**: 9°, 9°x 30° , 9°x 60°
    *Figure obtained under manufacturer's test conditions
    ** Asymmetric beam angles available as accessory micro-lens films
    Photometric Data CRI (Color Rendering Index) : >70 (higher CRI available on request) CCT: 2700K - 6500K Luminous output:
      1 ft at 12W 4 ft at 48W
    2700K: 790 lumens 3390 lumens
    4000K: 900 lumens 3730 lumens
    6500K: 850 lumens 3600 lumens
    Construction Housing: Aluminum Finish: Clear anodized (standard) or white (optional) Front: Clear polycarbonate Protection rating: IP66 IK rating: IK08 Effective Projected Area (EPA): 0.04 m2 per ft Corrosion resistance: C5 - very high corrosivity / Durability Range: High (ISO 12944-6) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
    Installation Orientation: Any Minimum distance to illuminated surfaces: 0.1 m / 0.3 ft.
  • Connections

    Power/data in/thru: 8-pin custom connectors
    Surge Protection: 4 KV
    Maximum connected 4 ft fixtures *: 42 pcs (52 m /169 ft) @ 230-277 V
    Maximum total string length (cable + fixtures)*: 150 m / 328 ft
    * Refer to system diagram for details on fixture run limitations.

    Electrical

    AC power: 100-277 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 0.35 A                   
    Typical earth-leakage current 1 ft: 0.15 mA
    Typical earth-leakage current 4 ft: 0.21 mA
    Power Factor 12 W / 10 W mode: 0.95 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.90 @ 277 V
    Power Factor 5 W mode: 0.90 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.70 @ 277 V

    Power Consumption 1 ft
    Maximum: 12 W / 10 W / 5 W *
    Idle: 1.54 W *

    Power Consumption 4 ft
    Maximum: 48 W / 40 W / 20 W *
    Idle: 2.30 W *

    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Idle: steady state, all LEDs at zero intensity.
    Power Consumption: Depending on power setting mode.

    Thermal Cooling: Convection Maximum ambient temperature: 45° C (113° F)* Minimum ambient temperature: -30° C (-22° F)
    *Above this temperature, the fixture regulates output to protect from overheating
    Maximum total heat dissipation, calculated, +/- 10%: 41 BTU/hr. per foot
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard inlay and outer packaging Efficacy (max output): 75 lm/W LWR*: 1059 lm/kg (474 lm/lb)

    *LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class B Canadian safety: CSA C22.2 No. 250.0 Canadian EMC: ICES 003(B), ICES 005(B) Australia/NZ: RCM India: BIS IS 10322(Part5/section5) Korea: KS C 9832, KS C 9835
    Related Items Martin Companion Cable: P/N MAR-91616091 Martin Companion Cable (for firmware update over DMX): Free download from www.martin.com
    Accessories

    Beam control
    Glare shield, EL Pro 1ft set of 4: P/N MAR-90570022
    Glare shield, EL Pro, 4ft set of 4: P/N MAR-90570023
    Louvre, EL Pro CTC, 1ft set of 4: P/N MAR-90570028
    Asymm diffuser Wide EL Pro 4ft, set of 6: P/N MAR-90570020
    Asymm diffuser Narrow EL Pro 4ft, set of 6: P/N MAR-90570021

    Mounting brackets
    Adjustable bracket EL Pro 10 pcs: P/N MAR-90570025
    Flange bracket EL Pro 10 pcs: MAR-90570026
    Quick mount bracket EL Pro 10 pcs: P/N MAR-90570027

    Pre-assembled PD Hybrid Power DMX cables
    Power DMX Cable PD PD 0.2M: P/N MAR-91700004
    Power DMX Cable PD PD 1M EU: MAR-91700005
    Power DMX Cable PD PD 2.5M EU: P/N MAR-91700006
    Power DMX Cable PD PD 5M EU: P/N MAR-91700007
    Power DMX Cable PD PD 10M EU: P/N MAR-91700008
    Power DMX Cable PD PD 0.2M US: P/N MAR-91700010
    Power DMX Cable PD PD 1M US: P/N MAR-91700011
    Power DMX Cable PD PD 2.5M US: P/N MAR-91700012
    Power DMX Cable PD PD 5M US: P/N MAR-91700013
    Power DMX Cable PD PD 10M US: P/N MAR-91700014

    Bulk Hybrid Power DMX Cables and Connectors
    Power DMX Cable 100M Roll EU: P/N MAR-91700009
    Power DMX Cable 100M Roll US: P/N MAR-91700016
    Field installable connector PD female: P/N MAR-91700017
    Field installable connector PD male: P/N MAR-91700018

    Junction box and End Termination Cap, Multitool
    End termination cap PD: P/N MAR-91700015
    Junction Box Power DMX to PD: P/N MAR-91700019
    Exterior Multitool: P/N MAR-90590025

    Ordering Information Exterior Linear Pro graze CTC 1ft: P/N MAR-90570006 Exterior Linear Pro graze CTC 4ft: P/N MAR-90570008

Download

Specifications
  Versione Lingua Dimensione Caricato
file type icon PD (Power+ Data) Hybrid Cables and Connectors
en versione B, aggiornato: lug 2025
en  958 KB lug 2025
file type icon Exterior Linear Pro System Diagram
en versione D, aggiornato: gen 2026
en  1,12 MB gen 2026
file type icon Exterior Linear Pro Graze CTC Spec Sheet
en versione F, aggiornato: gen 2026
en  1,31 MB gen 2026
file type icon Descriptive Specs - Exterior Linear Pro Graze CTC
en versione A, aggiornato: dic 2022
en  82,8 KB dic 2022
Manuals
  Versione Lingua Dimensione Caricato
en  2,25 MB lug 2023
de  2,05 MB lug 2023
fr  2,14 MB lug 2023
Brochures
  Lingua Dimensione Caricato
en  6,83 MB ott 2024
Photometrics
  Versione Lingua Dimensione Caricato
file type icon Exterior Linear Pro Graze CTC Photometrics
en versione B, aggiornato: apr 2023
en  18,2 MB apr 2023
Illustrations
  Versione Lingua Dimensione Caricato
file type icon Junction Box - 2D dimensions (PDF)
en versione A, aggiornato: ott 2022
en  238 KB ott 2022
file type icon Exterior Linear Pro Graze-Cove - 2D Dimensions (PDF)
en versione B, aggiornato: giu 2024
en  1,29 MB giu 2024
file type icon Exterior Linear Pro Graze-Cove - 2D Dimensions (DWG)
en versione B, aggiornato: giu 2024
en  6,76 MB giu 2024
file type icon Junction Box - 2D dimensions (DWG)
en versione A, aggiornato: ott 2022
en  1,2 MB ott 2022
Symbols
  Versione Lingua Dimensione Caricato
file type icon AutoCAD 2D Symbols
en versione 2.9, aggiornato: ago 2026
2.9  en  5,2 MB ago 2026
file type icon AutoCAD 3D Symbols
en versione 2.9, aggiornato: ago 2026
2.9  en  24,6 MB ago 2026
file type icon Martin Professional GDTF Library
en versione A, aggiornato: ott 2023
en  203 Byte ott 2023
file type icon Vectorworks Symbols
en versione 4.7, aggiornato: ago 2026
4.7  en  286 MB ago 2026
CAD Drawings
  Versione Lingua Dimensione Caricato
file type icon Exterior Linear Pro Graze-Cove - 3DS
en versione B, aggiornato: mar 2025
en  5,89 MB mar 2025
file type icon Junction Box - 3D DWG
en versione B, aggiornato: gen 2024
en  5,09 MB gen 2024
file type icon Junction Box - 3DS
en versione B, aggiornato: gen 2024
en  8,47 MB gen 2024
file type icon Exterior Linear Pro Graze-Cove - 3D DWG
en versione B, aggiornato: mar 2025
en  13,7 MB mar 2025
BIM Objects
  Versione Lingua Dimensione Caricato
file type icon Exterior Linear Pro Graze CTC - BIM Object
en versione A, aggiornato: nov 2023
en  nov 2023
Compliances
  Versione Lingua Dimensione Caricato
file type icon Exterior Linear Pro - CB Test Certificate
en versione B, aggiornato: gen 2024
en  252 KB gen 2024
file type icon Exterior Linear Pro - EU Declaration of Conformity
en versione A, aggiornato: mar 2023
en  280 KB mar 2023
file type icon Exterior Linear Pro - UKCA Declaration of Conformity
en versione A, aggiornato: mar 2023
en  279 KB mar 2023
file type icon Exterior Linear Pro - ETL Listing Verification
en versione A, aggiornato: mar 2023
en  590 KB mar 2023
en  419 KB nov 2023
Service Notes
  Versione Lingua Dimensione Caricato
file type icon Assembly instruction for PD hybrid connectors
en versione A, aggiornato: gen 2025
en  5,21 MB gen 2025
Firmware
  Versione Dimensione Caricato
download icon for Exterior Linear Pro Family - Firmware Exterior Linear Pro Family - Firmware
versione 1.2.1, aggiornato: set 2026
1.2.1   set 2026

Se uno dei link sopra produce caratteri strani nel tuo browser, fai clic destro sul file per salvarlo sul tuo computer.

Notizie

Supporto/FAQ

HARMAN Professional Solutions:

Exterior Linear Pro Graze CTC

Apparecchio lineare da esterno per illuminazione radente con controllo della temperatura di colore


5 Year Warranty  Martin Warranty - IP66  Martin Warranty - C5  Martin Warranty - 4KV  Martin Warranty - IK08