Martin VDO Fenix 6

Il VDO Fenix 6 è il primo della famiglia di pannelli LED video outdoor travel-friendly con pixel pitch da 6 mm e piena compatibilità cross-rental. Il robusto e ergonomico frame elimina la necessità di utilizzare un frame touring aggiuntivo e consente un'assemblaggio rapido e facile delle pareti video LED. VDO Fenix 6 è gestito dalla premiata famiglia Martin P3 System Controller che controlla anche i prodotti creative LED video di Martin, garantendo luminosità e qualità dell'immagine ottimale in una varietà di applicazioni rental outdoor (e indoor). Tutti i pannelli che escono dalla nostra fabbrica in Danimarca sono calibrati per corrispondere ai pannelli esistenti, rendendoli altamente cross-rentabili.

Robusto e travel-friendly - pronto al tour direttamente dalla scatola
Facile da assemblare e configurare - richiede una sola persona
Completamente calibrato per qualità ottimale dell'immagine e piena compatibilità cross-rental

Physical Height: 576 mm (22.7 in.) Depth: 100 mm (4 in.) Weight: 12.4 kg (27.4 lb.) Width: 576 mm (22.7 in.)

Control/User Interface Device status: Multicolor status LED Device test and reset: Pushbutton to call up local test patterns and reset device

Photometric Data Pitch (pixel center-to-center): 6.857 mm Total output (max.): 5500 Nit (calibrated Color resolution: 16 bits per color (48 bit per pixel) Resolution, one panel: 84 x 84 pixels Pixels per panel: 7056 Color and intensity calibration: Pixel-level

Video Processing Video signal processor: Martin P3-100™, P3-200™, P3-300™ or P3-PC System Controller System processing depth: 16 bits per color (48 bit per pixel) Refresh rate: 10 500 Hz Calibration: Per-pixel color and brightness, stored inside each LED block for easy service System latency: Progressive 1 frame, Interlaced 3 frames Latency between first and last panel: None Frame synchronization to analog signal or genlock: Yes, integrated in P3 System Controller Image rotation: Yes, integrated in P3 System Controller Scaling: Yes, integrated in P3 System Controller De-interlacing: Yes, integrated in P3 System Controller Gamma curve selection and adjustment: Yes, integrated in P3 System Controller Real-time panel content remapping: Yes, integrated in P3 System Controller Color temperature control: Yes, integrated in P3 System Controller Color space control: Yes, integrated in P3 System Controller

P3 Signal Protocol Signal type: Gigabit Ethernet Protocol: Proprietary Martin P3 Hot pluggable: Yes, electrically isolated at all connections Cable type: Ethernet, CAT 5e or better Cable length: Up to 100 m between any 2 devices, extendable with Ethernet switch

Construction Panel frames: Aluminum LED modules per panel: 14 Color: Matt black Protection rating: IP65

Installation Orientation: Any Rigging: Individual panel via standard truss clamps, full column(s) via header hardware Max. suspended in one column: 21 VDO Fenix family panels Panel interlocking: Quick-release mounting system, single-person operation

Connections Power input: Neutrik PowerCON TRUE 1 Data input: IP65-rated Gigabit Ethernet connector Power thru: Neutrik PowerCON TRUE 1 Data thru: IP65-rated Gigabit Ethernet connector

Electrical AC power: 200-240 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Peak power consumption (at full intensity, full white): 250 W Typical power consumption (with typical video content): 85 W Figures for typical video content are indicative only and will vary:

Thermal Cooling: Convection Maximum ambient temperature (at full intensity, full white): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)

Approvals EU safety: EN 60825-1, EN 60950, EN 60529 EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 US safety (pending): ANSI/UL 60950-1 Canadian safety (pending): CAN/CSA 60950-1 Australia/NZ: C-TICK N4241

Accessories Hardware: VDO Fenix™ family headers VDO Fenix™ family footer hardware VDO Fenix™ family curving kit VDO Fenix™ family flightcases Power cables: Power Input Cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, with PowerCON TRUE1 NAC3FX-W, 1.5 m (4.9 ft.): P/N 11541513 Power Relay Cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, PowerCON TRUE1 in/out connectors, 0.7 m (2.3 ft.): P/N 11541514 Power Relay Cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, PowerCON TRUE1 in/out connectors, 1.5 m (4.9 ft.): P/N 11541512 Power Relay Cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, PowerCON TRUE1 in/out connectors, 3.25 m (10.7 ft.): P/N 11541511 Power connectors: Cable Connector, PowerCON TRUE1 female, NAC3FX-W: P/N 05323416 Cable Connector, PowerCON TRUE1 male, NAC3MX-W: P/N 06343418

Related Items Martin P3-100™ System Controller: P/N 90721010 Martin P3-200™ System Controller: P/N 90721020 Martin P3-300™ System Controller: P/N 90721060 Martin P3-PC™ System Controller: P/N 90721030

Ordering Information VDO Fenix 6™ Panel in 6-unit flightcase: P/N 90354630 VDO Fenix™ 6-Panel Flightcase: P/N 91515032 VDO Fenix 6™ LED Video Panel in cardboard: P/N 90354620