ធ្វើបច្ចុប្បន្នភាពចុងក្រោយ: 24 ធ្នូ
Version 6.3.2 2025-12-24
Recovers P3-050/150/300 System Controller to Software Version 6.3.2 by reformatting and re-installing the SD card
Instructions
- Power off P3-050/150/300 System Controller and remove lid.
- Eject SD card (located underneath the bottom right of the raised DSP Board on P3-300, located at edge of mainboard on P3-050/150).
- Insert the SD card into a card reader connected to a computer.
- If needed, re-format the SD card (FAT32).
- Download the ZIP file.
- Extract following files from the ZIP file:
- dsp_card.fpga
- stingray_p3_150.fpga
- reload_fw
- rootfs.tar.gz
- uImage
- Copy the five files above onto the SD card.
- Re-insert the SD card into the DSP card (P3-300) or mainboard (P3-050/150).
- Close lid.
- Power up system.
ទាញយក
