P3 PowerPort 500 IP Rental

Unit Daya+Data Indoor/Outdoor untuk Perlengkapan LED Kreatif Martin

P3 PowerPort 500 IP Rental

Martin P3 PowerPort 500 IP Rental memberikan daya dan data yang mulus untuk fixture LED Kreatif Martin dan ideal untuk aplikasi rental dalam/luar ruangan. Ini menggabungkan pengiriman daya yang stabil dengan distribusi data berkecepatan tinggi dan berkapasitas besar, menyederhanakan penyebaran fixture. Perumahan mendukung instalasi di rak, truss, dan dinding, untuk fleksibilitas penyebaran maksimal.

Untuk memastikan fleksibilitas maksimal bagi desainer dan integrator, dapat digerakkan menggunakan protokol standar industri, termasuk Art-Net dan sACN serta protokol kontrol P3 pemenang penghargaan Martin. Tidak memerlukan konfigurasi atau setup lokal, memungkinkan penyebaran mudah dan memungkinkan catu daya ditempatkan pada jarak yang jauh dari fixture pencahayaan. Mendukung kabel yang lebih panjang, lebih banyak fixture per daisy chain, dan cabang terpisah. Switch jaringan bawaan menghilangkan kebutuhan akan switch pihak ketiga, dan kontrol pembatasan daya meningkatkan jumlah fixture per daisy-chain sambil menerapkan langkah penghematan energi.

P3 PowerPort 500 IP Rental adalah solusi yang kuat dan dapat diandalkan, karena melindungi semua input dan output terhadap kondisi kelebihan beban dan lonjakan serta teknologi bypass fail-safe bawaan mencegah kegagalan unit tunggal mengganggu seluruh jaringan. Selain itu, ini adalah unit tunggal yang menyediakan data dan daya melalui satu kabel ke fixture. Lebih lanjut, dilengkapi dengan LED indikasi status lokal dan tombol pengujian, menghilangkan kebutuhan bagi seseorang untuk berada secara fisik di pengontrol atau komputer.

Semua fixture LED Kreatif yang kompatibel dengan P3 PowerPort dapat dipasangkan dengan P3 PowerPort 500 IP Rental, bahkan pada daisy-chain yang sama.

Fitur

  • Unit catu daya+data untuk dalam/luar ruangan untuk fixture LED Martin Creative rental
  • Ideal untuk aplikasi rental
  • Fitur 1 output catu daya+data untuk koneksi fixture
  • Switch jaringan bawaan untuk daisy-chaining yang mudah
  • LED status memberikan umpan balik real-time
  • Tombol uji lokal untuk diagnostik yang mudah
  • Kontrol daya bawaan memungkinkan lebih banyak fixture per daisy-chain ketika output penuh tidak diperlukan
  • Mode Hibernation bawaan memungkinkan penghematan energi ketika sistem tidak digunakan
  • Kompatibel dengan Art-Net, sACN, dan Martin P3
  • Dilengkapi dengan konektor untuk deployment yang mudah
  • Dapat dipasang di truss, rack, atau dinding
  • Rating IP65

Keterangan Lebih Lanjut

Solusi Martin P3 PowerPort ideal untuk System Integrators yang membangun sistem dengan fixture LED Martin Creative, perusahaan rental yang membuat armada fixture dan infrastruktur pendukung untuk mencakup berbagai aplikasi, serta pelanggan instalasi yang melengkapi instalasi fixture mereka dengan infrastruktur pendukung yang diperlukan.

Spesifikasi

  • Physical

    Width: 217.0 mm (8.5 in.) (single or double unit 19” rack-mountable with included rackmount ears)
    Height: 44.45 mm (1.75 in.) (rackmount 1U)
    Depth: 365.0 mm (14.4 in.)
    Weight: 3.5 kg (7.7 lbs.)

    Control and Programming

    Control Protocols: P3, sACN, Art-Net and RDM over Art-Net
    Protocol Detection: Automatic
    Settings and Feedback: P3 or RDM over Art-Net
    Unit identification: User-settable ID number
    Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
    sACN Compliance: ANSI E1.31 - 2018
    Martin P3 Compliance: P3 System Controller Software 6.1.0 or newer
    Ethernet Transceiver IN: 100/1000Mbit (with fail-safe bypass to Ethernet THRU)
    Ethernet Transceiver THRU: 100/1000Mbit (with fail-safe bypass to Ethernet IN)
    Ethernet Transceiver OUT: 100Mbit
    Firmware Update: via Ethernet using Martin Companion or P3 System Controller

    Control/User Interface Frontpanel

    Power Out Status: 1x Green LED
    Ethernet Out Status: 1x Amber LED
    Ethernet In/Thru Status 1-2: 2x Green+Amber LED
    Device Status: 1x RGB LED
    Device test and reset: Pushbutton to call up test patterns on fixtures connected to DCE output and reset device

    Control/User Interface Backpanel

    Fixtures Power Mode: DIP switch to force all connected fixtures in normal power, force all connected fixtures in half power or let controller decide (via P3 or RDM)
    Frontpanel Disable: DIP switch to disable all (5) Status LEDs and the pushbutton on the frontpanel

    Construction

    Color: Matte Black
    Housing Material: Aluminium
    Protection Rating: IP 65
    NEMA Enclosure Rating: Type 3
    Corrosion Resistance: ISO 12944-6: 2018; C3 Medium, Test regime ISO 9227, 240h

    Installation

    Orientation: Any
    Single Unit 19-inch Rackmount: Using supplied short and long rack mounting ears
    Dual Unit 19-inch Rackmount: Using supplied coupling plates and short rack mounting ears
    Wallmount: Using supplied short rack mounting ears
    Trussmount Vertical: Using half-coupler clamp in M10 threaded hole, max. bolt length 20 mm
    Trussmount Horizontal: Using halfcouplers in supplied short rack mounting ears
    Location: indoor or temporary outdoor

    Connections

    Power In/Thru: Neutrik powerCON TRUE1 TOP
    Ethernet In/Thru: 2x Neutrik etherCON TOP
    DC Power and Network output: 1x chassis-mount DCE hybrid connector (7pin)
    All connections hot plugging compatible

    Output Ports

    Quantity: 1
    Power: 48 VDC / 10 A
    Ethernet: 100Mbit (P3, sACN, Art-Net)

  • Electrical

    AC power: 100-240 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 2.7 A
    Typical earth-leakage current: 0.53 mA
    Power Factor: 0.99 @ 100 V / 120 V , 0.98 @ 208 V , 0.97 @ 230 V / 240 V
    Max current draw: 5.5 A @ 100 V / 120 V , 3.0 A @ 208 V / 230 V / 240 V
    Typical current draw: 5.3 A @ 100 V / 120 V , 2.6 A @ 208 V / 230 V / 240 V *
    Power Consumption
    Maximum: 500 W
    Typical: 480 W *
    Idle: 5 W *
    Hibernation: 4 W *
    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Typical: output at full capacity with all connected fixtures at full output white.
    Idle: output at full capacity with all connected fixtures at zero output.
    Hibernation: output disabled; wake-up procedure required to re-use fixtures.

    Thermal

    Cooling: Convection
    Maximum Ambient Temperature (Ta max): 40° C (104° F)
    Minimum Ambient Temperature (Ta min): -30° C (-22° F)
    Maximum Surface Temperature, steady state, at 40° C ambient: 65° C (149° F)
    Typical Heat Dissipation (calculated, +/- 10%): 106 BTU/hr.

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard inlay and outer packaging
    Approvals Global CB Certification/IECEE: IEC 62368-1 EU safety: EN 62368-1 EU EMC: EN 55032, EN55035, EN 61000-3-2, EN 61000-3-3 US safety: UL 62368-1 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 62368-1 Canadian EMC: ICES-003 Class B Australia/NZ: RCM United Kingdom: UKCA
    Compatible Fixtures

    VDO Sceptron XB
    Exterior Dot-1 Pro (via Exterior DC-Feeder)
    Exterior Dot-4 Pro (via Exterior DC-Feeder)
    Exterior Dot-9 Pro (via Exterior DC-Feeder)
    Exterior Dot-HP Pro

    Included Items

    1x Multi-Language Safety & Installation Manual
    1x Safety Cable Attachment Eyelet, incl. screws
    2x Short Rack Mounting Ears (usable for rack-, wall- and clamp-mounting), incl. screws
    1x Long Rack Mounting Ear (usable for rack-mounting), incl. screws
    1x Coupling Plate (usable for rack-mounting), incl. screws

    Related Items

    P3 PowerPort 2000: P/N MAR-90721200
    P3 PowerPort 500 IP Install: P/N MAR-90721202
    DCE PSU 240 IP: P/N MAR-90721203
    DCE DataSplitterBooster IP: P/N MAR-90721204

    Martin Companion Firmware Upload, Addressing and Stand-Alone Programming Software: Free download from www.martin.com

    P3-175 System Controller: P/N MAR-90721100
    P3-275 System Controller: P/N MAR-90721101
    P3-PC System Controller: Free download from www.martin.com

    Accessories

    AC Power Input Cables
    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173

    AC Power Linking Cables
    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

    AC Power Connectors
    Cable Connector, Neutrik powerCON TRUE1 TOP Female: P/N 91611789HU
    Cable Connector, Neutrik PowerCON TRUE1 TOP Male: P/N 91611788HU

    Pre-Assembled Hybrid DCE Cables
    DC + Ethernet Cable DCE-DCE 1m: P/N MAR-91700100
    DC + Ethernet Cable DCE-DCE 2.5m: P/N MAR-91700101
    DC + Ethernet Cable DCE-DCE 5m: P/N MAR-91700102
    DC + Ethernet Cable DCE-DCE 10m: P/N MAR-91700103
    DC + Ethernet Cable DCE-DCE 25m: P/N MAR-91700104

    Bulk Hybrid DCE Cables
    DC + Ethernet Cable 100m: P/N MAR-91700105
    DC + Ethernet Cable LSZH 100m: P/N MAR-91700106

    Field-Installable DCE Connectors
    Field-installable Connector DCE Male: P/N MAR-91700107
    Field-installable Connector DCE Female: P/N MAR-91700108

    Closing Caps for DCE Connectors
    Closing Cap Male DCE Connector: P/N MAR-91700109
    Closing Cap Female DCE Connector: P/N MAR-91700110

    Hybrid DCE Adapters
    DC + Ethernet Adapter DCE Male-Male: P/N MAR-91700111
    DC + Ethernet Adapter DCE Female-Female: P/N MAR-91700112
    DC + Ethernet Adapter EtherCON+Wires to DCE: P/N MAR-91700113
    DC + Ethernet Adapter DCE to EtherCON: P/N MAR-91700114

    Rigging Accessories
    Super Lightweight Half Coupler Rigging Clamp, black: P/N 91602018
    G-clamp (suspension with unit hanging downwards only): P/N 91602003
    Half-coupler Clamp: P/N 91602005
    Quick Trigger Clamp (suspension with unit hanging downwards only): P/N 91602007
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

    Ordering Information

    P3 PowerPort 500 IP Rental: P/N MAR-90721201

Unduhan

Specifications
  Versi Bahasa Ukuran Diunggah
file type icon P3 PowerPort 500 IP Rental - Spec Sheet
en versi B, diperbarui: Nov 2025
en  1,25 MB Nov 2025
file type icon DCE Cables & Connectors - Drawings
en versi C, diperbarui: Mei 2026
en  1,9 MB Mei 2026
en  463 KB Agu 2024
Manuals
  Versi Bahasa Ukuran Diunggah
en  1,8 MB Agu 2024
fr  2,01 MB Agu 2024
de  2,02 MB Agu 2024
es  1,89 MB Agu 2024
file type icon P3 PowerPort Family - Capacity Information Note
en versi C, diperbarui: Mei 2026
en  250 KB Mei 2026
Illustrations
  Versi Bahasa Ukuran Diunggah
file type icon P3 PowerPort 500 IP Rental - 2D Dimensions
en versi A, diperbarui: Agu 2024
en  2,81 MB Agu 2024
Symbols
  Versi Bahasa Ukuran Diunggah
file type icon Martin Professional GDTF Library
en versi A, diperbarui: Okt 2023
en  203 Byte Okt 2023
file type icon AutoCAD 2D Symbols
en versi 2.8, diperbarui: Jan 2026
2.8  en  4,42 MB Jan 2026
file type icon AutoCAD 3D Symbols
en versi 2.8, diperbarui: Jan 2026
2.8  en  18,7 MB Jan 2026
file type icon Vectorworks Symbols
en versi 4.6, diperbarui: Jan 2026
4.6  en  249 MB Jan 2026
CAD Drawings
  Versi Bahasa Ukuran Diunggah
file type icon P3 PowerPort 500 IP Rental - 3D Model
en versi A, diperbarui: Agu 2024
en  35,1 MB Agu 2024
BIM Objects
  Versi Bahasa Ukuran Diunggah
file type icon P3 PowerPort 500 IP Rental - BIM Object
en versi A, diperbarui: Mei 2025
en  Mei 2025
Compliances
  Versi Bahasa Ukuran Diunggah
en  186 KB Feb 2025
en  414 KB Sep 2025
en  503 KB Okt 2024
file type icon P3 PowerPort 500 IP Rental - CB Test Certificate
en versi A, diperbarui: Okt 2024
en  134 KB Okt 2024
en  221 KB Sep 2024
en  151 KB Sep 2024
en  481 KB Sep 2024
Firmware
  Versi Ukuran Diunggah
download icon for P3 PowerPort 500 IP - Firmware P3 PowerPort 500 IP - Firmware
versi 1.1.1, diperbarui: Jul 2026
1.1.1   Jul 2026

Jika ada tautan di atas yang menampilkan karakter aneh di browser Anda, klik kanan file tersebut untuk menyimpannya ke komputer Anda.

Dukungan/FAQ

HARMAN Professional Solutions: