MAC Encore Performance CLD

高品質コールドライト硬いエッジムービングヘッド

MAC Encore Performance CLD

MAC Encore™ Performance CLD は、最先端の LED テクノロジーと独自の革新的なライトエンジンを統合し、極めて高い演色性を備えた、純粋でフルスペクトラムの光を発生するように精密に設計されています。豊富な機能を搭載したムービングヘッドは、比類なき 6000 K のクリスプで中性的なデイライトを提供します。高度なカラーミキシングシステムは、滑らかで繊細なパステルカラーから豊かで鮮やかな彩度の高い色までの全パレットを実現します。さらに、タングステン/オレンジへの完全な可変色補正機能を備えています。

  • 比類なき 6000 K コールドホワイトライト品質
  • 超静音冷却およびエフェクト動作
  • 業界最高水準のサイズ/重量/パフォーマンス比
  • 新しいLED技術

    実際の用途に向けて設計されており、ピュアホワイト6000K色温度は、LEDムービングヘッドで現在までのところ最も包括的なスペクトラムを提供します。高いCRI値、TM-30およびR9値により、肌のトーン、衣装、セットピースなど、すべてが自然に本当の色で表現されます。慎重に選定されたLED refresh rateにより、カメラ撮影アプリケーションでのちらつき無し動作が実現します。

  • WHISPER-SILENT

    これは当社が開発した中で最も静かで、シャープなエッジを持つムービングヘッドです。すべてのモーター駆動エフェクト動作(冷却ファン、フレーミングシャッター、アイリス、ズーム、パン、チルト)は、厳格な騒音レベルが必須となるアプリケーション向けに設計されています。最大動作モードで稼働している場合でも、MAC Encore Performance CLDはサイレント性能を発揮します。

  • カラーパレット

    可変色温度補正(CTO)による正確な色温度制御により、黒体放射曲線に忠実で、グリーンシフトやマゼンタシフトのない性能を実現します。正確な制御とスムーズな調整オプションにより、セットやステージ上の他の光源の色温度に合わせることができます。ライトからビビッドなCMYカラーミキシング、スムーズなパステルから豊かで鮮やかなプライマリカラーまで対応します。

  • 光学系

    ズーミングまたはディミング時に色温度変化のないフラットフィールド光学系により、高から低の強度まで、ビーム全体に均一な光と色温度分布を確保し、完全なコントロールを実現します。超高速で精密、かつ超静音の1:4ズームと自動連動フォーカスにより、高い天井から低い天井まで対応でき、狭いビームから広いカバレッジまで幅広く使用できます。

  • ダイナミック エフェクツ

    5つの回転ガラスゴボが投影およびミッドエア エフェクト用の優れたパターン選択肢をデザイナーに提供し、特許取得済みのAnimotion™ FXシステムが3Dエフェクト オプションを追加します。スリムなフォーカル分離により、ゴボをアニメーション ホイールおよびフレーミングと同時に実行できます。また、正確でタイトなアイリスにより、クリスプでシャープなビームを定義できます。

  • 頑丈で軽量な設計

    業界最高水準のコンパクト設計とプレミアム品質を備えた MAC Encore Performance CLD は、Martin のツアー実績に基づいた基準を満たしています。洗練されたフォルムにより、同クラスで最高のルーメン/kg(ポンド)比を実現しています。これらを組み合わせることで、市場で最も軽量で最高品質のフィクスチャを実現しました(31 kg/68 lbs.)。

featured content

新しいLED技術

実際の用途に向けて設計されており、ピュアホワイト6000K色温度は、LEDムービングヘッドで現在までのところ最も包括的なスペクトラムを提供します。高いCRI値、TM-30およびR9値により、肌のトーン、衣装、セットピースなど、すべてが自然に本当の色で表現されます。慎重に選定されたLED refresh rateにより、カメラ撮影アプリケーションでのちらつき無し動作が実現します。

featured content

WHISPER-SILENT

これは当社が開発した中で最も静かで、シャープなエッジを持つムービングヘッドです。すべてのモーター駆動エフェクト動作(冷却ファン、フレーミングシャッター、アイリス、ズーム、パン、チルト)は、厳格な騒音レベルが必須となるアプリケーション向けに設計されています。最大動作モードで稼働している場合でも、MAC Encore Performance CLDはサイレント性能を発揮します。

featured content

カラーパレット

可変色温度補正(CTO)による正確な色温度制御により、黒体放射曲線に忠実で、グリーンシフトやマゼンタシフトのない性能を実現します。正確な制御とスムーズな調整オプションにより、セットやステージ上の他の光源の色温度に合わせることができます。ライトからビビッドなCMYカラーミキシング、スムーズなパステルから豊かで鮮やかなプライマリカラーまで対応します。

featured content

光学系

ズーミングまたはディミング時に色温度変化のないフラットフィールド光学系により、高から低の強度まで、ビーム全体に均一な光と色温度分布を確保し、完全なコントロールを実現します。超高速で精密、かつ超静音の1:4ズームと自動連動フォーカスにより、高い天井から低い天井まで対応でき、狭いビームから広いカバレッジまで幅広く使用できます。

featured content

ダイナミック エフェクツ

5つの回転ガラスゴボが投影およびミッドエア エフェクト用の優れたパターン選択肢をデザイナーに提供し、特許取得済みのAnimotion™ FXシステムが3Dエフェクト オプションを追加します。スリムなフォーカル分離により、ゴボをアニメーション ホイールおよびフレーミングと同時に実行できます。また、正確でタイトなアイリスにより、クリスプでシャープなビームを定義できます。

featured content

頑丈で軽量な設計

業界最高水準のコンパクト設計とプレミアム品質を備えた MAC Encore Performance CLD は、Martin のツアー実績に基づいた基準を満たしています。洗練されたフォルムにより、同クラスで最高のルーメン/kg(ポンド)比を実現しています。これらを組み合わせることで、市場で最も軽量で最高品質のフィクスチャを実現しました(31 kg/68 lbs.)。

ビデオ

 

 

 

 

特長

  • ピュアホワイトLEDエンジン、6000 K CCT
  • ズームおよびディミング時に色温度変化のないフラットフィールド
  • フリッカーフリー動作—すべてのカメラアプリケーションに対応したLEDドライバー周波数
  • 超低ノイズ—対流冷却と強制空気冷却を組み合わせ、ユーザー選択可能な出力対音量レベル制御
  • 完全電子ディマー/シャッターコントロール、各種ディミングカーブとタングステンレッドシフトエミュレーション機能搭載
  • ビビッドなCMYカラーミキシング、淡いパステルカラーから深い飽和プライマリーカラーまでの優れた色パレット
  • 可変CTO—昼光からタングステンCCT制御、黒体曲線に忠実なCMYパレットの拡張
  • カラーホイール—6枚の交換可能なダイクロイックフィルター + オープン
  • 1:4ズーム—正確で高速、自動リンク焦点機能付き無音ズーム
  • 4枚のフレーミングシャッターブレード、個別±30°調整、およびシステム全体の±55°回転により、高精度キューリピートが可能
  • 5枚の回転ガラスゴボ、フレーミングシステムからの焦点分離がほぼゼロ
  • アニメーションホイール、連続多方向回転とインデックス機能、可変角度、速度、方向対応
  • Animotion™ FXシステム—素晴らしい3D中空およびプロジェクション効果のための内部ディミング効果マクロ
  • 正確でタイトなアイリス、調整可能なダイナミック効果
  • ソフトフロスト—ゴボアートワークとフレーム画像が見えて美しいソフトエッジを備えた軽いフロスト
  • ヘビーフロストはオプションアクセサリーとして利用可能
  • 3相ステッパーモーター技術と絶対位置監視により、超正確で静粛なパン/チルト移動およびポジショニング
  • コンパクトサイズ—L: 452 mm x W: 480 mm x H: 733 mm (L: 17.8 in x W: 18.9 in x H: 28.9 in)
  • 低重量—31 kg/68 lbs
  • 安全な輸送のためのフォームラバー(SiP)フライトケースインサート

仕様

  • Physical Length: 452 mm (17.8 in.) Width: 480 mm (18.9 in.) across yoke Height:

    740 mm (29.2 in.) maximum
    731 mm (28.8 in.) head straight up

    Weight: 31 kg (68.4 lbs.) Minimum center-to-center distance in side-by-side installation: 700 mm (27.6 in.)
    Dynamic Effects Pre-programmed effects: Two ranges of FX, independent or synchronized/combined Color mixing: CMY, independently variable 0 - 100% Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction Rotating gobo wheel: 5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake Iris: Variable 0 - 100% Zoom: Motorized Color temperature control: Variable 6000 - 2700 K Framing: Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position Frost: Variable 0 - 100% Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout Dimming options: Choice of four dimming curves Pan: 540° Tilt: 268° Position correction system: Absolute position monitoring Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
    Control and Programming Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX 16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt Movement control options: Tracking and vector DMX channels: 38 Fixture Identification: User-settable ID number DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485 Fixture software update: USB memory device or over DMX link
    Optics Zoom range: 12° - 48° one-tenth peak (1:4) Light source: 468 W custom Martin LED engine Minimum LED lifetime: 50,000 hours (to >80% luminous output)* *Figure obtained under manufacturer's test conditions
    Photometric Data Light engine luminous output: ≥ 39,400 lumens Fixture luminous output: 11,600 lumens CRI (Color Rendering Index) : >80 CQS (Color Quality Scale): >80 TM-30 Rf (IES TM-30-15 Fidelity Index): >80 TM-30 Rg (IES TM-30-15 Gamut Index): >95 TLCI (Television Lighting Consistency Index): >70 CCT: 6000 K (+/- 250 K)

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20
    Installation Mounting points: 4 pairs of 1/4-turn locks Location: Dry location only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m (8 in.) Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)
    Connections AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector) DMX and RDM data in/out: 5-pin locking XLR
  • Electrical

    AC power: 120-240 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
    Power Factor: 0.99 @ 120 V / 208 V , 0.98 @ 230 V / 240 V
    Typical current draw: 5.0 A @ 120 V , 2.9 A @ 208 V , 2.6 A @ 230 V , 2.2 A @ 240 V *
    Power Consumption
    Typical: 596 W *
    Idle: 64 W *
    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Typical: full output white, no effects moving, regulated fan speed.
    Idle: no output, no effects moving, regulated fan speed.

    Thermal Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F) Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 20 lm/w LWR*: 297 lm/kg (169 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals EU safety: EN 60598-2-17, EN 62471, EN62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA C22.2 No. E598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: RCM Thailand: TIS
    Included Items Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
    Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com
    Accessories Gelframe MAC Encore: P/N 91001000 Set of Followspot Handles MAC Encore: P/N 91001001HU Heavy Frost Assy MAC Encore Performance: P/N 91001002HU SIP Packaging MAC Encore Family: P/N 91616115HU Static GOBO Wheel MAC Encore Performance: P/N 91001003 Top Hat MAC Encore Performance: P/N 91001004 Cables and connectors:

    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
    Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789

    *Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts Installation hardware:

    G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
    Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
    Half-coupler Clamp: P/N 91602005
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

    Flightcase: Two-unit Flightcase for MAC Encore™*: P/N 91515048
    Verified Third-Party Accessories

    Beam Control
    MAC Encore Performance Top Hat: P/N City Theatrical 2778

    Ordering Information MAC Encore™ Performance CLD EPS (in cardboard box, polystyrene packaging): P/N 90234000 MAC Encore™ Performance CLD SIP (in cardboard box with SIP foam flightcase insert): P/N 90234005 MAC Encore™ Performance CLD, white finish, EPS (in cardboard box, polystyrene packaging): P/N 90234010HU

ダウンロード

Specifications
  バージョン 言語 サイズ アップロード日
file type icon MAC Encore Performance - Acoustic test report
en バージョン B, 更新: 2022年5月
en  801KB 2022年5月
file type icon MAC Encore - SiP data sheet
en バージョン B, 更新: 2020年10月
en  1.31MB 2020年10月
file type icon MAC Encore Performance - Spec sheets
en バージョン A, 更新: 2020年10月
en  1.41MB 2020年10月
Manuals
  バージョン 言語 サイズ アップロード日
de  6.64MB 2023年5月
file type icon MAC Encore Performance - Bedienungsanleitung
de バージョン C, 更新: 2023年5月
de  1.11MB 2023年5月
file type icon MAC Encore Performance - User Guide
en バージョン C, 更新: 2023年5月
en  1.16MB 2023年5月
file type icon MAC Encore Performance - Guide de l'Utilisateur
fr バージョン C, 更新: 2023年5月
fr  1.17MB 2023年5月
file type icon MAC Encore Performance - Manuel d'Installation et Sécurité
fr バージョン E, 更新: 2023年5月
fr  6.75MB 2023年5月
file type icon MAC Encore Performance - Safety and Installation Manual
en バージョン E, 更新: 2018年10月
en  6.68MB 2018年10月
Photometrics
  バージョン 言語 サイズ アップロード日
file type icon MAC Encore Performance - Photometric files
en バージョン A, 更新: 2021年10月
en  7.3MB 2021年10月
Illustrations
  バージョン 言語 サイズ アップロード日
    214KB 2020年10月
    368KB 2019年3月
    315KB 2019年3月
    428KB 2020年10月
file type icon MAC Encore Performance - 2D dimensions (DWG)
en バージョン B, 更新: 2020年10月
en  3.79MB 2020年10月
file type icon MAC Encore Performance - 2D dimensions (PDF)
en バージョン B, 更新: 2020年10月
en  281KB 2020年10月
Symbols
  バージョン 言語 サイズ アップロード日
file type icon Martin Professional GDTF Library
en バージョン A, 更新: 2023年10月
en  203バイト 2023年10月
file type icon AutoCAD 2D Symbols
en バージョン 2.8, 更新: 2026年1月
2.8  en  4.42MB 2026年1月
file type icon AutoCAD 3D Symbols
en バージョン 2.8, 更新: 2026年1月
2.8  en  18.7MB 2026年1月
file type icon Vectorworks Symbols
en バージョン 4.6, 更新: 2026年1月
4.6  en  249MB 2026年1月
CAD Drawings
  バージョン 言語 サイズ アップロード日
file type icon MAC Encore Performance - Head horizontal, 3D dimensions (DWG)
en バージョン A, 更新: 2020年10月
en  10.1MB 2020年10月
file type icon MAC Encore Performance - Head horizontal, 3D dimensions (3DS)
en バージョン A, 更新: 2020年10月
en  13.5MB 2020年10月
file type icon MAC Encore Performance - Head vertical, 3D dimensions (DWG)
en バージョン A, 更新: 2020年10月
en  8.12MB 2020年10月
file type icon MAC Encore Performance - Head vertical, 3D dimensions (3DS)
en バージョン A, 更新: 2020年10月
en  12.6MB 2020年10月
BIM Objects
  バージョン 言語 サイズ アップロード日
file type icon MAC Encore Performance CLD - BIM Object
en バージョン A, 更新: 2024年4月
en  2024年4月
Compliances
  バージョン 言語 サイズ アップロード日
file type icon MAC Encore Performance - EU Declaration of Conformity
バージョン A, 更新: 2020年10月
  422KB 2020年10月
file type icon MAC Encore Performance - EU Declaration of Conformity
en バージョン B, 更新: 2020年10月
en  446KB 2020年10月
fr  503KB 2020年10月
file type icon MAC Encore Series - ETL Listing Verification
バージョン A, 更新: 2020年10月
  380KB 2020年10月
file type icon Safety Document (SDS) for Batteries
en バージョン D, 更新: 2026年1月
en  332KB 2026年1月
Service Notes
  バージョン 言語 サイズ アップロード日
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
バージョン 4, 更新: 2020年10月
  743KB 2020年10月
Firmware
  バージョン サイズ アップロード日
download icon for MAC Encore Performance - Firmware MAC Encore Performance - Firmware
バージョン 1.6.1, 更新: 2026年6月
1.6.1   2026年6月

上記のリンクをクリックしてブラウザで文字化けが発生する場合は、ファイルを右クリックしてコンピューターに保存してください。

ニュース

サポート/FAQ