MAC Encore Performance CLD

고품질 냉광 하드엣지 무빙헤드

MAC Encore Performance CLD

MAC Encore™ Performance CLD는 최첨단 LED 기술을 독점적이고 혁신적인 라이트 엔진과 통합하여 뛰어난 색감 표현력으로 깨끗하고 완전한 스펙트럼 조명을 생성하도록 정교하게 설계되었습니다. 기능이 풍부한 무빙헤드는 비교할 수 없는 6000 K의 선명하고 중성적인 주광을 제공합니다. 첨단 색상 혼합 시스템은 부드럽고 섬세한 파스텔 톤부터 풍부하고 생생한 채도 높은 색상까지 완전한 색상 팔레트를 전달합니다. 또한 텅스텐/주황색으로의 완전히 가변적인 색상 보정을 제공합니다.

  • 비교할 수 없는 6000 K 콜드 화이트 조명 품질
  • 초저소음 냉각 및 이펙트 작동
  • 업계 최고 수준의 크기/무게/성능 비율
  • 새로운 LED 기술

    실제 응용 분야를 위해 설계된 순백색 6000 K CCT는 LED 무빙 헤드에서 현재까지 가장 포괄적인 스펙트럼을 제공합니다. 높은 CRI, TM-30 및 R9 값으로 피부 톤, 의상, 세트 소품 등이 자연스럽게 본래의 색상으로 재현됩니다. 신중하게 선택된 LED 리프레시 레이트는 카메라 응용 분야에서 플리커 프리 작동을 보장합니다.

  • 속삭임처럼 조용함

    지금까지 제작한 가장 조용한 하드 엣지 무빙 헤드입니다. 냉각 팬, 프레이밍 셔터, 아이리스, 줌, 팬 및 틸트 등 모든 모터 구동 이펙트 작동이 엄격한 소음 수준 제어가 필수적인 환경을 위해 설계되었습니다. 최대 작동 모드에서 실행 중일 때도 MAC Encore Performance CLD는 스텔스 운영을 유지합니다.

  • 색상 팔레트

    가변 색온도 보정(CTO)을 통한 정밀한 색온도 제어로 녹색 또는 자홍색 편차 없이 흑체 곡선을 충실히 유지합니다. 세트나 무대의 다른 광원 색온도와 정확하게 일치시킬 수 있는 정밀한 제어 및 부드러운 조정 옵션을 제공합니다. 밝고 부드러운 파스텔 톤부터 풍부하고 포화된 기본색까지 선명한 CMY 색상 혼합을 구현합니다.

  • 광학

    줌이나 디밍 시 색온도 변화가 없는 플랫 필드 광학 시스템으로 고강도에서 저강도까지 빔 전체에서 균일한 광과 색온도 분포를 보장하여 완벽한 제어가 가능합니다. 초고속, 정밀하며 매우 조용한 자동 연동 포커스가 있는 1:4 줌으로 높은 천장과 낮은 천장 모두에 사용할 수 있으며 타이트한 빔에서 광범위한 커버리지까지 지원합니다.

  • 동적 이펙트

    5개의 회전식 유리 고보는 디자이너에게 프로젝션 및 공중 이펙트를 위한 다양한 패턴 선택을 제공하며, 특허받은 Animotion™ FX 시스템은 3D 이펙트 옵션을 추가합니다. 슬림 포커스 분리 기능을 통해 고보를 애니메이션 휠 및 프레이밍과 동시에 구동할 수 있으며, 정밀하고 타이트한 아이리스는 선명하고 샤프한 빔을 구현합니다.

  • 견고하고 가벼운 설계

    동급 최고의 컴팩트한 설계와 프리미엄 제작 품질을 갖춘 MAC Encore Performance CLD는 Martin의 투어 검증 표준을 충족합니다. 세련된 폼 팩터는 동급 최고의 kg/lb당 루멘 비율을 제공합니다. 이를 통해 시장에서 가장 가볍고 뛰어난 픽스처(31 kg/68 lbs.)를 제공합니다.

featured content

새로운 LED 기술

실제 응용 분야를 위해 설계된 순백색 6000 K CCT는 LED 무빙 헤드에서 현재까지 가장 포괄적인 스펙트럼을 제공합니다. 높은 CRI, TM-30 및 R9 값으로 피부 톤, 의상, 세트 소품 등이 자연스럽게 본래의 색상으로 재현됩니다. 신중하게 선택된 LED 리프레시 레이트는 카메라 응용 분야에서 플리커 프리 작동을 보장합니다.

featured content

속삭임처럼 조용함

지금까지 제작한 가장 조용한 하드 엣지 무빙 헤드입니다. 냉각 팬, 프레이밍 셔터, 아이리스, 줌, 팬 및 틸트 등 모든 모터 구동 이펙트 작동이 엄격한 소음 수준 제어가 필수적인 환경을 위해 설계되었습니다. 최대 작동 모드에서 실행 중일 때도 MAC Encore Performance CLD는 스텔스 운영을 유지합니다.

featured content

색상 팔레트

가변 색온도 보정(CTO)을 통한 정밀한 색온도 제어로 녹색 또는 자홍색 편차 없이 흑체 곡선을 충실히 유지합니다. 세트나 무대의 다른 광원 색온도와 정확하게 일치시킬 수 있는 정밀한 제어 및 부드러운 조정 옵션을 제공합니다. 밝고 부드러운 파스텔 톤부터 풍부하고 포화된 기본색까지 선명한 CMY 색상 혼합을 구현합니다.

featured content

광학

줌이나 디밍 시 색온도 변화가 없는 플랫 필드 광학 시스템으로 고강도에서 저강도까지 빔 전체에서 균일한 광과 색온도 분포를 보장하여 완벽한 제어가 가능합니다. 초고속, 정밀하며 매우 조용한 자동 연동 포커스가 있는 1:4 줌으로 높은 천장과 낮은 천장 모두에 사용할 수 있으며 타이트한 빔에서 광범위한 커버리지까지 지원합니다.

featured content

동적 이펙트

5개의 회전식 유리 고보는 디자이너에게 프로젝션 및 공중 이펙트를 위한 다양한 패턴 선택을 제공하며, 특허받은 Animotion™ FX 시스템은 3D 이펙트 옵션을 추가합니다. 슬림 포커스 분리 기능을 통해 고보를 애니메이션 휠 및 프레이밍과 동시에 구동할 수 있으며, 정밀하고 타이트한 아이리스는 선명하고 샤프한 빔을 구현합니다.

featured content

견고하고 가벼운 설계

동급 최고의 컴팩트한 설계와 프리미엄 제작 품질을 갖춘 MAC Encore Performance CLD는 Martin의 투어 검증 표준을 충족합니다. 세련된 폼 팩터는 동급 최고의 kg/lb당 루멘 비율을 제공합니다. 이를 통해 시장에서 가장 가볍고 뛰어난 픽스처(31 kg/68 lbs.)를 제공합니다.

비디오

 

 

 

 

기능

  • 6000 K CCT의 순수 백색 LED 엔진
  • 줌 및 디밍 시 색온도 변화가 없는 균일한 필드
  • 깜박임 없는 작동—모든 카메라 애플리케이션에 적합한 LED 드라이버 주파수
  • 초저소음—대류 및 강제 공랭 방식을 결합하며 사용자가 출력 대비 소음 수준을 선택 가능
  • 다양한 디밍 곡선 및 텅스텐 적색 편이 에뮬레이션을 지원하는 완전 전자식 디머/셔터 제어
  • 밝고 부드러운 파스텔 톤부터 풍부하고 포화된 원색에 이르는 뛰어난 색상 범위를 제공하는 생생한 CMY 색상 혼합
  • 가변식 CTO—주광에서 텅스텐까지 CCT 제어 및 흑체 곡선에 충실한 CMY 팔레트 확장
  • 색상 휠—교체 가능한 다이크로익 필터 6개 + 오픈
  • 1:4 줌—정밀하고 빠르며 무소음 줌, 자동 연동 포커스
  • 개별 +/- 30° 조정 및 전체 시스템 회전 +/- 55°가 가능한 4개의 프레이밍 셔터 블레이드로 고정밀 큐 반복 구현
  • 프레이밍 시스템과의 초점 분리가 거의 없는 회전식 유리 고보 5개
  • 연속 다방향 회전 및 인덱싱이 가능한 애니메이션 휠, 가변식 각도, 속도 및 방향 지원
  • Animotion™ FX 시스템—놀라운 3D 공중 및 프로젝션 효과를 위한 내부 디밍 효과 매크로
  • 조정 가능한 다이내믹 효과를 갖춘 정밀하고 타이트한 아이리스
  • 소프트 프로스트—고보 아트워크와 프레이밍된 이미지를 보존하며 아름다운 부드러운 가장자리를 구현하는 약한 프로스트
  • 헤비 프로스트는 옵션 액세서리로 제공
  • 3상 스테퍼 모터 기술 및 절대 위치 모니터링을 통한 초정밀 무소음 팬/틸트 이동 및 위치 지정
  • 컴팩트 사이즈—L: 452 mm x W: 480 mm x H: 733 mm (L: 17.8 in x W: 18.9 in x H: 28.9 in)
  • 경량—31 kg/68 lbs
  • 안전한 배송을 위한 폼 러버(SiP) 플라이트케이스 인서트 

사양

  • Physical Length: 452 mm (17.8 in.) Width: 480 mm (18.9 in.) across yoke Height:

    740 mm (29.2 in.) maximum
    731 mm (28.8 in.) head straight up

    Weight: 31 kg (68.4 lbs.) Minimum center-to-center distance in side-by-side installation: 700 mm (27.6 in.)
    Dynamic Effects Pre-programmed effects: Two ranges of FX, independent or synchronized/combined Color mixing: CMY, independently variable 0 - 100% Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction Rotating gobo wheel: 5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake Iris: Variable 0 - 100% Zoom: Motorized Color temperature control: Variable 6000 - 2700 K Framing: Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position Frost: Variable 0 - 100% Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout Dimming options: Choice of four dimming curves Pan: 540° Tilt: 268° Position correction system: Absolute position monitoring Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
    Control and Programming Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX 16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt Movement control options: Tracking and vector DMX channels: 38 Fixture Identification: User-settable ID number DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485 Fixture software update: USB memory device or over DMX link
    Optics Zoom range: 12° - 48° one-tenth peak (1:4) Light source: 468 W custom Martin LED engine Minimum LED lifetime: 50,000 hours (to >80% luminous output)* *Figure obtained under manufacturer's test conditions
    Photometric Data Light engine luminous output: ≥ 39,400 lumens Fixture luminous output: 11,600 lumens CRI (Color Rendering Index) : >80 CQS (Color Quality Scale): >80 TM-30 Rf (IES TM-30-15 Fidelity Index): >80 TM-30 Rg (IES TM-30-15 Gamut Index): >95 TLCI (Television Lighting Consistency Index): >70 CCT: 6000 K (+/- 250 K)

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20
    Installation Mounting points: 4 pairs of 1/4-turn locks Location: Dry location only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m (8 in.) Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)
    Connections AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector) DMX and RDM data in/out: 5-pin locking XLR
  • Electrical

    AC power: 120-240 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
    Power Factor: 0.99 @ 120 V / 208 V , 0.98 @ 230 V / 240 V
    Typical current draw: 5.0 A @ 120 V , 2.9 A @ 208 V , 2.6 A @ 230 V , 2.2 A @ 240 V *
    Power Consumption
    Typical: 596 W *
    Idle: 64 W *
    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Typical: full output white, no effects moving, regulated fan speed.
    Idle: no output, no effects moving, regulated fan speed.

    Thermal Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F) Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 20 lm/w LWR*: 297 lm/kg (169 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals EU safety: EN 60598-2-17, EN 62471, EN62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA C22.2 No. E598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: RCM Thailand: TIS
    Included Items Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
    Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com
    Accessories Gelframe MAC Encore: P/N 91001000 Set of Followspot Handles MAC Encore: P/N 91001001HU Heavy Frost Assy MAC Encore Performance: P/N 91001002HU SIP Packaging MAC Encore Family: P/N 91616115HU Static GOBO Wheel MAC Encore Performance: P/N 91001003 Top Hat MAC Encore Performance: P/N 91001004 Cables and connectors:

    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
    Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789

    *Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts Installation hardware:

    G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
    Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
    Half-coupler Clamp: P/N 91602005
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

    Flightcase: Two-unit Flightcase for MAC Encore™*: P/N 91515048
    Verified Third-Party Accessories

    Beam Control
    MAC Encore Performance Top Hat: P/N City Theatrical 2778

    Ordering Information MAC Encore™ Performance CLD EPS (in cardboard box, polystyrene packaging): P/N 90234000 MAC Encore™ Performance CLD SIP (in cardboard box with SIP foam flightcase insert): P/N 90234005 MAC Encore™ Performance CLD, white finish, EPS (in cardboard box, polystyrene packaging): P/N 90234010HU

다운로드

Specifications
  버전 언어 크기 업로드됨
file type icon MAC Encore Performance - Acoustic test report
en 버전 B, 업데이트됨: 2022년 5월월
en  801KB 2022년 5월월
file type icon MAC Encore - SiP data sheet
en 버전 B, 업데이트됨: 2020년 10월월
en  1.31MB 2020년 10월월
file type icon MAC Encore Performance - Spec sheets
en 버전 A, 업데이트됨: 2020년 10월월
en  1.41MB 2020년 10월월
Manuals
  버전 언어 크기 업로드됨
file type icon MAC Encore Performance - Sicherheits- und Installationshinweise
de 버전 E, 업데이트됨: 2023년 5월월
de  6.64MB 2023년 5월월
file type icon MAC Encore Performance - Bedienungsanleitung
de 버전 C, 업데이트됨: 2023년 5월월
de  1.11MB 2023년 5월월
file type icon MAC Encore Performance - User Guide
en 버전 C, 업데이트됨: 2023년 5월월
en  1.16MB 2023년 5월월
file type icon MAC Encore Performance - Guide de l'Utilisateur
fr 버전 C, 업데이트됨: 2023년 5월월
fr  1.17MB 2023년 5월월
file type icon MAC Encore Performance - Manuel d'Installation et Sécurité
fr 버전 E, 업데이트됨: 2023년 5월월
fr  6.75MB 2023년 5월월
file type icon MAC Encore Performance - Safety and Installation Manual
en 버전 E, 업데이트됨: 2018년 10월월
en  6.68MB 2018년 10월월
Photometrics
  버전 언어 크기 업로드됨
file type icon MAC Encore Performance - Photometric files
en 버전 A, 업데이트됨: 2021년 10월월
en  7.3MB 2021년 10월월
Illustrations
  버전 언어 크기 업로드됨
file type icon Top Hat MAC Encore Performance - 2D Dimensions (PDF)
업데이트됨: 2020년 10월월
    214KB 2020년 10월월
file type icon MAC Encore Performance Animation Wheel Drawing
업데이트됨: 2019년 3월월
    368KB 2019년 3월월
file type icon MAC Encore Performance Static Gobo Wheel Drawing
업데이트됨: 2019년 3월월
    315KB 2019년 3월월
file type icon Top Hat MAC Encore Performance - 2D Dimensions (DWG)
업데이트됨: 2020년 10월월
    428KB 2020년 10월월
file type icon MAC Encore Performance - 2D dimensions (DWG)
en 버전 B, 업데이트됨: 2020년 10월월
en  3.79MB 2020년 10월월
file type icon MAC Encore Performance - 2D dimensions (PDF)
en 버전 B, 업데이트됨: 2020년 10월월
en  281KB 2020년 10월월
Symbols
  버전 언어 크기 업로드됨
file type icon Martin Professional GDTF Library
en 버전 A, 업데이트됨: 2023년 10월월
en  203바이트 2023년 10월월
file type icon AutoCAD 2D Symbols
en 버전 2.8, 업데이트됨: 2026년 1월월
2.8  en  4.42MB 2026년 1월월
file type icon AutoCAD 3D Symbols
en 버전 2.8, 업데이트됨: 2026년 1월월
2.8  en  18.7MB 2026년 1월월
file type icon Vectorworks Symbols
en 버전 4.6, 업데이트됨: 2026년 1월월
4.6  en  249MB 2026년 1월월
CAD Drawings
  버전 언어 크기 업로드됨
file type icon MAC Encore Performance - Head horizontal, 3D dimensions (DWG)
en 버전 A, 업데이트됨: 2020년 10월월
en  10.1MB 2020년 10월월
file type icon MAC Encore Performance - Head horizontal, 3D dimensions (3DS)
en 버전 A, 업데이트됨: 2020년 10월월
en  13.5MB 2020년 10월월
file type icon MAC Encore Performance - Head vertical, 3D dimensions (DWG)
en 버전 A, 업데이트됨: 2020년 10월월
en  8.12MB 2020년 10월월
file type icon MAC Encore Performance - Head vertical, 3D dimensions (3DS)
en 버전 A, 업데이트됨: 2020년 10월월
en  12.6MB 2020년 10월월
BIM Objects
  버전 언어 크기 업로드됨
file type icon MAC Encore Performance CLD - BIM Object
en 버전 A, 업데이트됨: 2024년 4월월
en  2024년 4월월
Compliances
  버전 언어 크기 업로드됨
file type icon MAC Encore Performance - EU Declaration of Conformity
버전 A, 업데이트됨: 2020년 10월월
  422KB 2020년 10월월
file type icon MAC Encore Performance - EU Declaration of Conformity
en 버전 B, 업데이트됨: 2020년 10월월
en  446KB 2020년 10월월
file type icon MAC Encore Performance - Déclaration de Conformité Européenne
fr 버전 B, 업데이트됨: 2020년 10월월
fr  503KB 2020년 10월월
file type icon MAC Encore Series - ETL Listing Verification
버전 A, 업데이트됨: 2020년 10월월
  380KB 2020년 10월월
file type icon Safety Document (SDS) for Batteries
en 버전 D, 업데이트됨: 2026년 1월월
en  332KB 2026년 1월월
Service Notes
  버전 언어 크기 업로드됨
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
버전 4, 업데이트됨: 2020년 10월월
  743KB 2020년 10월월
Firmware
  버전 크기 업로드됨
download icon for MAC Encore Performance - Firmware MAC Encore Performance - Firmware
버전 1.6.1, 업데이트됨: 2026년 7월월
1.6.1   2026년 7월월

위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하십시오.

뉴스

지원/자주 묻는 질문

HARMAN Professional Solutions: