MAC Encore Performance CLD

高品质冷光硬边摇头灯

MAC Encore Performance CLD

MAC Encore™ Performance CLD integrates cutting-edge LED technology with a proprietary and innovative light engine carefully engineered to generate pristine, full spectrum light with ultra-high color rendition. The feature-packed moving head offers unparalleled 6000 K crisp, neutral daylight. Its advanced color mixing system delivers the full palette from smooth and subtle pastels to rich and vibrant saturated colors. Moreover, it offers a fully variable color correction to tungsten/orange.

  • Unparalleled 6000 K cold white light quality
  • Super silent cooling and effects operation
  • Best-in-class size/weight/performance ratio

  • 全新 LED 技术

    专为实际应用场景设计，其纯白 6000 K 色温（CCT）可提供目前 LED 光源摇头灯中最全面的光谱。高 CRI、TM-30 及 R9 数值可确保肤色、服装、舞台布景等自然呈现真实色彩。精心选定的 LED 刷新率可确保在摄像拍摄应用中无闪烁运行。

  • WHISPER-SILENT

    This is the most silent, hard edge moving head we’ve ever built. All motorized effect operations—cooling fans, framing shutters, iris, zoom, pan and tilt—are engineered for applications where strict noise levels are a necessity. Even while running at maximum operation mode, MAC Encore Performance CLD is still a stealth operator.

  • COLOR PALETTE

    Precise color temperature control with variable color temperature correction (CTO) that stays true to the black body curve without green or magenta shifts. Accurate control and smooth adjustment options to match the color temperature of other light sources on the set or stage. Vibrant CMY color mixing from light and smooth pastels to rich, saturated primaries.

  • OPTICS

    A flat field optical system with no color temperature variation while zooming or dimming ensures even light and color temperature distribution across the beam from high to low intensity for perfect control. Ultra-fast, precise, and super silent, 1:4 zoom with auto-linked focus allows for both high and low ceiling usage that spans from tight beams to wide coverage.

  • DYNAMIC EFFECTS

    Five rotating glass gobos offer designers a great choice of patterns for projection and mid-air effects and the patented Animotion™ FX system adds 3D effect options. Slim focal separation enables you to run gobos simultaneously with animation wheel and framing, while its precise and tight iris allows you to define crisp and sharp beams.

  • STURDY, LIGHTWEIGHT DESIGN

    With its best-in-class compact design and premium build-quality, MAC Encore Performance CLD lives up to Martin’s tour-proven standards. Its slick form factor offers the highest lumen per kg/lb ratio of its class. Combined, you get the lightest and finest fixture on the market (31 kg/68 lbs.).

featured content

全新 LED 技术

专为实际应用场景设计，其纯白 6000 K 色温（CCT）可提供目前 LED 光源摇头灯中最全面的光谱。高 CRI、TM-30 及 R9 数值可确保肤色、服装、舞台布景等自然呈现真实色彩。精心选定的 LED 刷新率可确保在摄像拍摄应用中无闪烁运行。

featured content

WHISPER-SILENT

This is the most silent, hard edge moving head we’ve ever built. All motorized effect operations—cooling fans, framing shutters, iris, zoom, pan and tilt—are engineered for applications where strict noise levels are a necessity. Even while running at maximum operation mode, MAC Encore Performance CLD is still a stealth operator.

featured content

COLOR PALETTE

Precise color temperature control with variable color temperature correction (CTO) that stays true to the black body curve without green or magenta shifts. Accurate control and smooth adjustment options to match the color temperature of other light sources on the set or stage. Vibrant CMY color mixing from light and smooth pastels to rich, saturated primaries.

featured content

OPTICS

A flat field optical system with no color temperature variation while zooming or dimming ensures even light and color temperature distribution across the beam from high to low intensity for perfect control. Ultra-fast, precise, and super silent, 1:4 zoom with auto-linked focus allows for both high and low ceiling usage that spans from tight beams to wide coverage.

featured content

DYNAMIC EFFECTS

Five rotating glass gobos offer designers a great choice of patterns for projection and mid-air effects and the patented Animotion™ FX system adds 3D effect options. Slim focal separation enables you to run gobos simultaneously with animation wheel and framing, while its precise and tight iris allows you to define crisp and sharp beams.

featured content

STURDY, LIGHTWEIGHT DESIGN

With its best-in-class compact design and premium build-quality, MAC Encore Performance CLD lives up to Martin’s tour-proven standards. Its slick form factor offers the highest lumen per kg/lb ratio of its class. Combined, you get the lightest and finest fixture on the market (31 kg/68 lbs.).

视频

 

 

 

 

特点

  • Pure white LED engine with 6000 K CCT
  • A flat field without color temperature variation during zoom and dimming.
  • Flicker-free operation—LED driver frequency suitable for all camera applications.
  • Ultra-low noise—Combines convection and forced air cooling with user-selectable output vs. sound level control.
  • Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
  • Vibrant CMY color mixing with a superior palette of colors ranging from light and smooth pastel shades to rich, saturated primaries.
  • Variable CTO—daylight to tungsten CCT control and expansion of the CMY palette that stays true to the black body curve.
  • Color wheel—6 interchangeable dichroic filters + open.
  • 1:4 zoom—precise and fast, silent zoom with auto- linked focus.
  • Four framing shutter blades with individual +/- 30° adjustment and entire system rotation of +/- 55° allow for high-precision cue repeats.
  • Five rotating glass gobos with next to zero focal separation from the framing system.
  • Animation wheel with continuous multi-directional rotation and indexing with variable angle, speed and direction.
  • Animotion™ FX System—internal dimming effect macros for stunning 3D mid-air and projection effects.
  • Precise and tight iris with adjustable dynamic effects.
  • Soft frost—a light frost that leaves gobo artwork and framed images visible with a beautiful soft edge.
  • Heavy frost available as an optional accessory.
  • Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
  • Compact size—L: 452 mm x W: 480 mm x H: 733 mm (L: 17.8 in x W: 18.9 in x H: 28.9 in).
  • Low weight—31 kg/68 lbs.
  • Foam rubber (SiP) flightcase insert for secure shipment. 

性能

  • 物理特性 长度: 452 mm (17.8 in.) 宽: 480 mm (18.9 in.) across yoke 高:

    740 mm (29.2 in.) maximum
    731 mm (28.8 in.) head straight up

     重量: 31 kg (68.4 lbs.) Minimum center-to-center distance in side-by-side installation: 700 mm (27.6 in.)
    Dynamic Effects Pre-programmed effects: Two ranges of FX, independent or synchronized/combined Color mixing: CMY, independently variable 0 - 100% Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction Rotating gobo wheel: 5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake Iris: Variable 0 - 100% Zoom: Motorized Color temperature control: Variable 6000 - 2700 K Framing: Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position Frost: Variable 0 - 100% Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout Dimming options: Choice of four dimming curves Pan: 540° Tilt: 268° Position correction system: Absolute position monitoring Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
    Control and Programming Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX 16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt Movement control options: Tracking and vector DMX channels: 38 Fixture Identification: User-settable ID number DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485 Fixture software update: USB memory device or over DMX link
    Optics Zoom range: 12° - 48° one-tenth peak (1:4) Light source: 468 W custom Martin LED engine Minimum LED lifetime: 50,000 hours (to >80% luminous output)* *Figure obtained under manufacturer's test conditions
    Photometric Data Light engine luminous output: ≥ 39,400 lumens Fixture luminous output: 11,600 lumens CRI (Color Rendering Index) : >80 CQS (Color Quality Scale): >80 TM-30 Rf (IES TM-30-15 Fidelity Index): >80 TM-30 Rg (IES TM-30-15 Gamut Index): >95 TLCI (Television Lighting Consistency Index): >70 CCT: 6000 K (+/- 250 K)

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
    Construction Housing: High-impact flame-retardant thermoplastic 颜色: Black Protection rating: IP20
    Installation Mounting Points: 4 pairs of 1/4-turn locks Location: Dry location only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m (8 in.) Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)
    Connections AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector) DMX and RDM data in/out: 5-pin locking XLR
  • Electrical

    AC power: 120-240 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
    Power Factor: 0.99 @ 120 V / 208 V , 0.98 @ 230 V / 240 V
    Typical current draw: 5.0 A @ 120 V , 2.9 A @ 208 V , 2.6 A @ 230 V , 2.2 A @ 240 V *
    Power Consumption
    Typical: 596 W *
    Idle: 64 W *
    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Typical: full output white, no effects moving, regulated fan speed.
    Idle: no output, no effects moving, regulated fan speed.
    Thermal 散热: Combined convection and forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F) Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 20 lm/w LWR*: 297 lm/kg (169 lm/lb)

    LWR = Lumen-to-Weight Ratio
    Approvals EU safety: EN 60598-2-17, EN 62471, EN62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA C22.2 No. E598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: RCM Thailand: TIS
    Included Items Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
    Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com
    Accessories Gelframe MAC Encore: P/N 91001000 Set of Followspot Handles MAC Encore: P/N 91001001HU Heavy Frost Assy MAC Encore Performance: P/N 91001002HU SIP Packaging MAC Encore Family: P/N 91616115HU Static GOBO Wheel MAC Encore Performance: P/N 91001003 Top Hat MAC Encore Performance: P/N 91001004 Cables and connectors:

    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
    Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789

     *Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts Installation hardware:

    G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
    Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
    Half-coupler Clamp: P/N 91602005
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

     Flightcase: Two-unit Flightcase for MAC Encore™*: P/N 91515048
    Verified Third-Party Accessories

    Beam Control
    MAC Encore Performance Top Hat: P/N City Theatrical 2778
    Ordering Information MAC Encore™ Performance CLD EPS (in cardboard box, polystyrene packaging): P/N 90234000 MAC Encore™ Performance CLD SIP (in cardboard box with SIP foam flightcase insert): P/N 90234005 MAC Encore™ Performance CLD, white finish, EPS (in cardboard box, polystyrene packaging): P/N 90234010HU

下载

Specifications
  版本 语言 大小 上传日期
file type icon MAC Encore Performance - Acoustic test report
en 版本 B, 更新: 5月 2022
B  en  801.5 KB 5月 2022
file type icon MAC Encore - SiP data sheet
en 版本 B, 更新: 10月 2020
B  en  1.3 MB 10月 2020
file type icon MAC Encore Performance - Spec sheets
en 版本 A, 更新: 10月 2020
A  en  1.4 MB 10月 2020
Manuals
  版本 语言 大小 上传日期
file type icon MAC Encore Performance - Sicherheits- und Installationshinweise
de 版本 E, 更新: 5月 2023
E  de  6.6 MB 5月 2023
file type icon MAC Encore Performance - Bedienungsanleitung
de 版本 C, 更新: 5月 2023
C  de  1.1 MB 5月 2023
file type icon MAC Encore Performance - User Guide
en 版本 C, 更新: 5月 2023
C  en  1.2 MB 5月 2023
file type icon MAC Encore Performance - Guide de l'Utilisateur
fr 版本 C, 更新: 5月 2023
C  fr  1.2 MB 5月 2023
file type icon MAC Encore Performance - Manuel d'Installation et Sécurité
fr 版本 E, 更新: 5月 2023
E  fr  6.8 MB 5月 2023
file type icon MAC Encore Performance - Safety and Installation Manual
en 版本 E, 更新: 10月 2018
E  en  6.7 MB 10月 2018
Photometrics
  版本 语言 大小 上传日期
file type icon MAC Encore Performance - Photometric files
en 版本 A, 更新: 10月 2021
A  en  7.3 MB 10月 2021
Illustrations
  版本 语言 大小 上传日期
file type icon Top Hat MAC Encore Performance - 2D Dimensions (PDF)
更新: 10月 2020
    213.7 KB 10月 2020
file type icon MAC Encore Performance Animation Wheel Drawing
更新: 3月 2019
    367.9 KB 3月 2019
file type icon MAC Encore Performance Static Gobo Wheel Drawing
更新: 3月 2019
    315.1 KB 3月 2019
file type icon Top Hat MAC Encore Performance - 2D Dimensions (DWG)
更新: 10月 2020
    428.4 KB 10月 2020
file type icon MAC Encore Performance - 2D dimensions (DWG)
en 版本 B, 更新: 10月 2020
B  en  3.8 MB 10月 2020
file type icon MAC Encore Performance - 2D dimensions (PDF)
en 版本 B, 更新: 10月 2020
B  en  281.2 KB 10月 2020
Symbols
  版本 语言 大小 上传日期
file type icon Martin Professional GDTF Library
en 版本 A, 更新: 10月 2023
A  en  203 字节 10月 2023
file type icon AutoCAD 2D Symbols
en 版本 2.9, 更新: 8月 2026
2.9  en  5.2 MB 8月 2026
file type icon AutoCAD 3D Symbols
en 版本 2.9, 更新: 8月 2026
2.9  en  24.6 MB 8月 2026
file type icon Vectorworks Symbols
en 版本 4.7, 更新: 8月 2026
4.7  en  286.4 MB 8月 2026
CAD Drawings
  版本 语言 大小 上传日期
file type icon MAC Encore Performance - Head horizontal, 3D dimensions (DWG)
en 版本 A, 更新: 10月 2020
A  en  10.1 MB 10月 2020
file type icon MAC Encore Performance - Head horizontal, 3D dimensions (3DS)
en 版本 A, 更新: 10月 2020
A  en  13.5 MB 10月 2020
file type icon MAC Encore Performance - Head vertical, 3D dimensions (DWG)
en 版本 A, 更新: 10月 2020
A  en  8.1 MB 10月 2020
file type icon MAC Encore Performance - Head vertical, 3D dimensions (3DS)
en 版本 A, 更新: 10月 2020
A  en  12.6 MB 10月 2020
BIM Objects
  版本 语言 大小 上传日期
file type icon MAC Encore Performance CLD - BIM Object
en 版本 A, 更新: 4月 2024
A  en  4月 2024
Compliances
  版本 语言 大小 上传日期
file type icon Safety Document (SDS) for Batteries
en 版本 D, 更新: 1月 2026
D  en  331.8 KB 1月 2026
file type icon MAC Encore Performance - EU Declaration of Conformity
版本 A, 更新: 10月 2020
A    421.8 KB 10月 2020
file type icon MAC Encore Performance - EU Declaration of Conformity
en 版本 B, 更新: 10月 2020
B  en  445.6 KB 10月 2020
file type icon MAC Encore Performance - Déclaration de Conformité Européenne
fr 版本 B, 更新: 10月 2020
B  fr  503.2 KB 10月 2020
file type icon MAC Encore Series - ETL Listing Verification
版本 A, 更新: 10月 2020
A    380.5 KB 10月 2020
Service Notes
  版本 语言 大小 上传日期
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
版本 4, 更新: 10月 2020
4    743.0 KB 10月 2020
Firmware
  版本 大小 上传日期
download icon for MAC Encore Performance - Firmware MAC Encore Performance - Firmware
版本 1.6.1, 更新: 11月 2026
1.6.1   11月 2026

如果上述任何链接在您的浏览器中显示为奇怪的字符，请右键点击文件以将其保存到您的计算机。

新闻

支援/最常见问题

HARMAN Professional Solutions:
ffind_dealer
hhave_question
c顾问支持

MAC Encore Performance CLD

高品质冷光硬边摇头灯

HARMAN Professional Solutions:
ffind_dealer
hhave_question
c顾问支持