home > produtos > Product Ranges > RUSH MH 6 Wash

RUSH MH 6 Wash
Descontinuado

Luminária de lavagem compacta com lente única e mistura de cores RGBW

RUSH MH 6 Wash

Imagens Grandes

The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.

Bright LED moving head wash light
12 x 10 W RGBW LEDs
Single-lens wash with fully premixed color

Vídeos

Recursos

12 x 10 W Osram Ostar RGBW LED’s
Single-lens wash with fully premixed color
2,000 lumen output
10°–60° zoom
32 pre-built color macros
Temperature-controlled cooling system
Digital display menu
PowerCON in and through
3 and 5-pin DMX options

Especificações

Physical Length: 290 mm (11.4 in.) Largura: 189 mm (7.4 in.) Altura: 360 mm (14.2 in.) Peso: 7.1 kg (15.7 lbs.)

Dynamic Effects Color mixing: RGBW Color presets: 36 color presets plus full white, ‘color wheel’ effects Zoom: Motorized Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout Pan: 540° Tilt: 200°

Control and Programming Control options: DMX 16-bit fine control: Dimming, pan and tilt DMX address setting: Control panel with LCD display White balance control: RGB adjustment DMX channels: 14 DMX compliance: USITT DMX512/1990

Optics Zoom range: 10° - 60° Light source: 12 x 10 W RGBW Osram Ostar LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* Binning: Tight color and flux binning *Figure obtained under manufacturer's test conditions.

Construction Housing: High-impact flame-retardant thermoplastic Cor: Black Ingress protection rating: IP20

Installation Mounting points: One quarter‐turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm (4 in.) Minimum distance to illuminated surfaces: 200 mm (8 in.) Minimum clearance around fan and air vents: 100 mm (4 in.)

Connections AC power in, thru: Neutrik PowerCon DMX data in, thru: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 3.15 A Typical half-cycle RMS inrush current: 11.3 A (at 240 VAC) Recommended Miniature Circuit Breaker: Type D*
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)

Approvals EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573, UL 8750 US EMC: CFR Title 47 Part 15 Canadian safety: CSA C22.2 No. 166 Australia/NZ: C-TICK N4241 / RCM

Included Items
Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
Omega bracket for rigging clamp attachment

Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com

Accessories Power connectors:
Power Connector PowerCON Male: P/N 91611795
Power Connector PowerCON Female : P/N 91611794
Cables, 16 A, for connection to power in chains:
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176
Cables, 16 A, for power input:
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
(H07RN-F are European approved cables, SJOOW are US approved cables)
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information RUSH MH 6 Wash™ in cardboard box: P/N 90280080

Downloads

Manuals

	Versão	Idioma	Tamanho	Enviado
RUSH MH 6 Wash - Manuel d'utilisation versão B, atualizado: mai 2018	B		677 KB	mai 2018
RUSH MH 6 Wash - User Manual versão D, atualizado: mai 2018	D		659 KB	mai 2018
RUSH MH 6 Wash - Bedienungsanleitung versão A, atualizado: mai 2018	A		903 KB	mai 2018

Photometrics

	Versão	Idioma	Tamanho	Enviado
RUSH MH 6 Wash - Photometric Files versão A, atualizado: mar 2024	A		170 KB	mar 2024

Illustrations

	Versão	Idioma	Tamanho	Enviado
RUSH MH 6 Wash - 2D (PDF) versão A, atualizado: mai 2018	A		637 KB	mai 2018
RUSH MH 6 Wash - 2D (DWG) versão A, atualizado: mai 2018	A		528 KB	mai 2018

Symbols

	Versão	Idioma	Tamanho	Enviado
Vectorworks Symbols versão 4.6, atualizado: jan 2026	4.6		249 MB	jan 2026

CAD Drawings

	Versão	Idioma	Tamanho	Enviado
Rush MH 6 Wash - 3D (DWG) versão A, atualizado: mai 2018	A		4,85 MB	mai 2018

Compliances

	Versão	Idioma	Tamanho	Enviado
RUSH MH 6 Wash - EU Declaration of Conformity versão B, atualizado: mar 2019	B		663 KB	mar 2019
RUSH MH 6 Wash - ETL Listing Verification versão A, atualizado: mai 2018	A		381 KB	mai 2018

Service Notes

	Versão	Idioma	Tamanho	Enviado
3D Partsfinder - Opening using Solid Works Composer Player versão 4, atualizado: out 2020	4		743 KB	out 2020

Tech Notes

	Tamanho	Enviado
Avoiding damage from sunlight and other light sources atualizado: set 2017		set 2017

Hints and Tips

	Versão	Idioma	Tamanho	Enviado
Avoiding damage from sunlight and other light sources versão B, atualizado: mai 2018	B			mai 2018

Firmware

	Versão	Tamanho	Enviado
RUSH MH 6 Wash - Firmware versão 2.0, atualizado: mai 2026	2.0		mai 2026

Se algum dos links acima resultar em caracteres estranhos em seu navegador, clique com o botão direito no arquivo para salvá-lo em seu computador.

Notícias

28 de março de 2018
South Korea Lights the Way Through Suyanggae Light Tunnel with Martin By HARMAN
10 de janeiro de 2018
The Phillip and Patricia Frost Museum of Science Explores New Frontiers with HARMAN Professional Solutions
21 de março de 2016
Martin by HARMAN Lighting Fixtures on Tour with GRAMMY® Award Winner, Ghost

Suporte/FAQs

HARMAN Professional Solutions:

Suporte para Consultores