hem > produkter > Product Ranges > RUSH MH 6 Wash

RUSH MH 6 Wash
Utgått

Compact single lens wash light with RGBW color mixing

RUSH MH 6 Wash

Större bilder

RUSH MH 6 Wash är en spännande vidareutveckling av den mycket populära RUSH PAR 2 RGBW Zoom, med samma LED-motor och zoomsystem, men dessutom med moving head-funktionalitet. RUSH MH 6 Wash erbjuder ett helt förmixat färgsystem från 12 x 10 W RGBW-lysdioder med en spektakulär zoom på 10°–60°. Den erbjuder även full elektronisk dimring, stroboskopeffekter och temperaturstyrd fläktkylning för tyst drift.

Ljusstarkt LED moving head wash-ljus
12 x 10 W RGBW-lysdioder
Enkellinsad wash med helt förmixad färg

Videor

Funktioner

12 x 10 W Osram Ostar RGBW LED’s
Single-lens wash with fully premixed color
2,000 lumen output
10°–60° zoom
32 pre-built color macros
Temperature-controlled cooling system
Digital display menu
PowerCON in and through
3 and 5-pin DMX options

Specifikationer

Physical Length: 290 mm (11.4 in.) Width: 189 mm (7.4 in.) Height: 360 mm (14.2 in.) Weight: 7.1 kg (15.7 lbs.)

Dynamic Effects Color mixing: RGBW Color presets: 36 color presets plus full white, ‘color wheel’ effects Zoom: Motorized Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout Pan: 540° Tilt: 200°

Control and Programming Control options: DMX 16-bit fine control: Dimming, pan and tilt DMX address setting: Control panel with LCD display White balance control: RGB adjustment DMX channels: 14 DMX compliance: USITT DMX512/1990

Optics Zoom range: 10° - 60° Light source: 12 x 10 W RGBW Osram Ostar LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* Binning: Tight color and flux binning *Figure obtained under manufacturer's test conditions.

Construction Housing: High-impact flame-retardant thermoplastic Color: Black Ingress protection rating: IP20

Installation Mounting points: One quarter‐turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm (4 in.) Minimum distance to illuminated surfaces: 200 mm (8 in.) Minimum clearance around fan and air vents: 100 mm (4 in.)

Connections AC power in, thru: Neutrik PowerCon DMX data in, thru: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 3.15 A Typical half-cycle RMS inrush current: 11.3 A (at 240 VAC) Recommended Miniature Circuit Breaker: Type D*
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)

Approvals EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573, UL 8750 US EMC: CFR Title 47 Part 15 Canadian safety: CSA C22.2 No. 166 Australia/NZ: C-TICK N4241 / RCM

Included Items
Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
Omega bracket for rigging clamp attachment

Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com

Accessories Power connectors:
Power Connector PowerCON Male: P/N 91611795
Power Connector PowerCON Female : P/N 91611794
Cables, 16 A, for connection to power in chains:
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176
Cables, 16 A, for power input:
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
(H07RN-F are European approved cables, SJOOW are US approved cables)
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information RUSH MH 6 Wash™ in cardboard box: P/N 90280080

Nedladdningar

Manuals

	Version	Språk	Storlek	Uppladdat
RUSH MH 6 Wash - Manuel d'utilisation version B, uppdaterad: maj 2018	B		677 KB	maj 2018
RUSH MH 6 Wash - User Manual version D, uppdaterad: maj 2018	D		659 KB	maj 2018
RUSH MH 6 Wash - Bedienungsanleitung version A, uppdaterad: maj 2018	A		903 KB	maj 2018

Photometrics

	Version	Språk	Storlek	Uppladdat
RUSH MH 6 Wash - Photometric Files version A, uppdaterad: mar 2024	A		170 KB	mar 2024

Illustrations

	Version	Språk	Storlek	Uppladdat
RUSH MH 6 Wash - 2D (PDF) version A, uppdaterad: maj 2018	A		637 KB	maj 2018
RUSH MH 6 Wash - 2D (DWG) version A, uppdaterad: maj 2018	A		528 KB	maj 2018

Symbols

	Version	Språk	Storlek	Uppladdat
Vectorworks Symbols version 4.7, uppdaterad: aug 2026	4.7		286 MB	aug 2026

CAD Drawings

	Version	Språk	Storlek	Uppladdat
Rush MH 6 Wash - 3D (DWG) version A, uppdaterad: maj 2018	A		4,85 MB	maj 2018

Compliances

	Version	Språk	Storlek	Uppladdat
RUSH MH 6 Wash - EU Declaration of Conformity version B, uppdaterad: mar 2019	B		663 KB	mar 2019
RUSH MH 6 Wash - ETL Listing Verification version A, uppdaterad: maj 2018	A		381 KB	maj 2018

Service Notes

	Version	Språk	Storlek	Uppladdat
3D Partsfinder - Opening using Solid Works Composer Player version 4, uppdaterad: okt 2020	4		743 KB	okt 2020

Tech Notes

	Storlek	Uppladdat
Avoiding damage from sunlight and other light sources uppdaterad: sep 2017		sep 2017

Hints and Tips

	Version	Språk	Storlek	Uppladdat
Avoiding damage from sunlight and other light sources version B, uppdaterad: maj 2018	B			maj 2018

Firmware

	Version	Storlek	Uppladdat
RUSH MH 6 Wash - Firmware version 2.0, uppdaterad: sep 2026	2.0		sep 2026

Om någon av länkarna ovan resulterar i konstiga tecken i din webbläsare, högerklicka på filen för att spara den på din dator.

Nyheter

Support/FAQ

HARMAN Professional Solutions: