• Physical

  Width (across yoke): 479 mm (18.9 in.)
  Width (base): 429 mm (16.9 in.)
  Height (head straight up): 758 mm (29.8 in.)
  Height (maximum): 776 mm (30.6 in.)
  Length (head): 595 mm (23.4 in.)
  Depth (base): 285 mm (11.2 in.)
  Minimum center-to-center distance in side-by-side installation: 720 mm (28 in.)
  Weight: 37.0 kg (81.5 lbs.)

  Dynamic Effects

  Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe, instant open and blackout
  Dimming options: Choice of four dimming curves
  Color Mixing: CMY, independently variable 0 - 100%
  Physical Color Temperature Control: Variable 5,800 – 2,850 K
  Virtual Color Temperature Control: Variable 2,000 – 12,850 K
  Virtual Tint Control: Variable green-magenta shift Δuv -0.05 – +0.05
  Color Wheel: 5 dichroic filters (incl. Spectral Enhancement Filter) + open, indexing, shake, continuous wheel rotation & random color
  Rotating Gobo Wheel 1: 7 interchangeable gobos + open, indexing, shake, continuous rotation, continuous wheel rotation & random gobo
  Rotating Gobo Wheel 2: 7 interchangeable gobos + open, indexing, shake, continuous rotation, continuous wheel rotation & random gobo
  Gobo Color Temperature Correction: Automatic
  Animation Wheel: Interchangeable animation wheel, indexing, shake, bounce, continuous rotation & variable wheel insertion angle
  Light Frost: Variable 0 - 100%
  Heavy Frost: Variable 0 - 100%
  Prism: 4 Facet, indexing, shake & continuous rotation
  Iris: Variable 0 - 100%, opening and closing pulse effects
  Zoom: Motorized with 1:9 zoom ratio
  Focus: Motorized, range varies with zoom angle, from approx. 4.5 m (14.8 ft.) to infinity, including focus tracking
  Framing: Rotatable framing module, +/- 83°, 4 x individually controllable full curtain blades with full variable angle (+/- 30°) through the entire insertion path from 0 - 100%
  Pan: Motorized 540°
  Tilt: Motorized 268°
  P3 Mix: Videomapping of fixture color and/or intensity with variable crossfade between DMX control and video control
  PixelMapping: Individual control of each of the 6 LED Segments
  Pre-programmed effects: Two ranges of FX, independent or synchronized/combined
  LED Frequency control: Variable LED PWM control

  Control and Programming

  Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and Martin P3 (additional protocols, incl. wireless, available via Universal Connect Module)
  Protocol Detection: Automatic
  DMX Modes: Basic, Extended & Ludicrous
  DMX Channels: 54, 64 & 70
  Multi-Universe Overflow: Yes, in all DMX Modes
  16-bit Controllable Parameters: Dimming, Color Mixing, CTO, Gobo Indexing and Rotation, Animation Wheel Indexing and Rotation, Prism Indexing and Rotation, Iris, Zoom, Focus, Framing Insertion and Angle, Framing Rotation, Pan and Tilt
  Setting and Addressing: Display Menu, NFC, RDM, RDM over Art-Net or Martin P3
  Local User Interface: Backlit LCD Display with battery-powered operation and integrated NFC antenna
  Fixture identification: User-settable ID number
  DMX Compliance: USITT DMX512-A
  RDM Compliance: ANSI/ESTA E1.20
  Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
  sACN Compliance: ANSI E1.31 - 2018
  Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer
  DMX/RDM Transceiver: Galvanic-isolated RS-485
  DMX/RDM Daisy-Chain Limit: 32 fixtures
  Ethernet Transceiver: 10/100Mbit (with fail-safe bypass)
  Ethernet Daisy-Chain Limit Recommendation: 50 fixtures
  Firmware Update: via USB type C memory device, via DMX using Martin Companion or via Ethernet using Martin Companion / P3 System Controller

  Optics

  Front Lens Diameter: 150 mm (5.9 in.)
  Zoom Range: 1:9
  Full Zoom Range at Tenth Peak (Field Angle): 5.7° - 54.0°
  Light Source: 55 x 22 W White LED in a custom Martin engine
  Max. Total LED Engine Power: 760 W
  Minimum LED lifetime: > 50.000 hours (to > 80% luminous output) / > 20.000 hours (to > 90% luminous output)*
  *Figure obtained under manufacturer's test conditions

  Photometric Data

  Light Engine Luminous Output: 56,000 lumens

  Without Spectral Enhancement Filter
  Fixture Luminous Output Wide: 28,000 lumens
  Fixture Luminous Output Narrow: 24,700 lumens
  Peak Luminous Intensity Narrow: 2,500,000 cd
  CCT: 5,800 K (+/- 250 K)
  CRI (Color Rendering Index): 68 (+/- 3)
  CQS (Color Quality Scale): 65 (+/- 3)
  TM-30 Rf (IES TM-30-15 Fidelity Index): 66 (+/- 3)
  TM-30 Rg (IES TM-30-15 Gamut Index): 94 (+/- 3)
  TLCI (Television Lighting Consistency Index): 44 (+/- 3)

  With Spectral Enhancement Filter
  Fixture Luminous Output Wide: 18,700 lumens
  Fixture Luminous Output Narrow: 16,600 lumens
  Peak Luminous Intensity Narrow: 1,700,000 cd
  CCT: 5,800 K (+/- 250 K)
  CRI (Color Rendering Index): 90 (+/- 3)
  CQS (Color Quality Scale): 83 (+/- 3)
  TM-30 Rf (IES TM-30-15 Fidelity Index): 78 (+/- 3)
  TM-30 Rg (IES TM-30-15 Gamut Index): 107 (+/- 3)
  TLCI (Television Lighting Consistency Index): 68 (+/- 3)

  LED Refresh Rate: 2,400 Hz with fine adjustment (+/- 2%) and Hybrid mode (DMX controllable)
  Binning: Tight color and flux binning
  Calibration: Full Gamut Color Calibration
  Color Modes: Direct Color Mode, Extended Gamut Mode and Calibrated Color Mode
  * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient
  * All Photometric Data measured at 5800 K white
  

  Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP54
  Gobos Maximum image diameter: 22 mm (0.866 in.) External diameter: 27.1 mm +0 / -0.2 mm (1.067 in. +/ - in.) Maximum gobo thickness: 1.1 mm (0.04 in.) Coating: Heavy matted aluminum Material: Borofloat 33
  Installation Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets Location: Indoor or Temporary Outdoor use, must be fastened to surface or structure Orientation: Any, except with display facing upwards in outdoor application Minimum distance to combustible materials: 0.2 m (7.9 in.) Minimum distance to illuminated surfaces: 3.25 m (10.7 ft.)
  Connections

  AC mains power in/thru: Neutrik Rean powerCON TRUE1 TOP
  DMX and RDM data in/thru: Neutrik 5-pin locking XLR TOP
  Ethernet (Art-Net, sACN and Martin P3) in/thru, including fail-safe bypass: Neutrik etherCON TOP
  Firmware from flash memory: USB 2.0 type C port
  Accessory Plug-In: Universal Connect Module Slot

  Electrical

  AC power: 100-240 V AC nominal, 50/60 Hz
  Power supply unit: Auto-ranging electronic switch mode
  Typical half-cycle RMS inrush current at 230 V, 50 Hz: 17 A
  Typical earth-leakage current: 0.7 mA
  Power Factor: 0.99 @ 100 V / 120 V / 208 V / 230 V , 0.98 @ 240 V
  Max current draw: 11.0 A @ 100 V / 120 V , 5.2 A @ 208 V ,  4.6 A @ 230 V / 240 V
  Typical current draw: 9.5 A @ 100 V , 7.8 A @ 120 V , 4.4 A @ 208 V , 4.0 A @ 230 V , 3.9 A @ 240 V *
  Power Consumption
  Maximum: 1040 W
  Typical: 945 W *
  Idle: 68 W *
  Hibernation: 6 W *
  * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  Typical: full output white, no effects moving, regulated fan speed.
  Idle: no output, no effects moving, regulated fan speed.
  Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

• Thermal Cooling: Forced air (temperature regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): -10° C (14° F) – Warm up condition may apply Maximum surface temperature, steady state, at 40° C ambient: 80° C (176° F) Total heat dissipation (calculated, +/- 10%): 3550 BTU/hr.
  Acoustic Data Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 37.7 dB(A) Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 31.9 dB(A)
  Warranty Fixture: 2 years Light Engine: 5 years
  Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Packaging: FSC Certified cardboard outer packaging & Recycled EPS inner packaging Efficacy (max output): 29.5 lm/w LWR*: 760 lm/kg (345 lm/lbs.)

  * LWR = Lumen-to-Weight Ratio

  Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1),EN 62471, EN 62493 EU EMC: EN 55015; EN 55032; EN 55035;EN 61547; EN 61000-3-3 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class B, ICES-005 Class B Australia/NZ: RCM United Kingdom: UKCA Thailand: TISI 1955-2551 Korea: KS C 9832, KS C 9835
  Included Items

  Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
  Multi-Language Safety and Installation Manual

  Related Items

  Martin Companion Cable (for firmware update over DMX): P/N 91616091
  Martin Companion Software (for firmware update over DMX/Ethernet and fixture setup/configuration via NFC): Free download from www.martin.com, app store and play store

  Accessories

  Optical
  MAC Viper XIP / MAC Encore Two Hotspot Filter (Gobo Replacement): P/N MAR-91614065HU

  Transport and Storage
  Flightcase for 1 x MAC Viper XIP / MAC Encore Two: P/N MAR-91515060
  Flightcase for 2 x MAC Viper XIP / MAC Encore Two: P/N MAR-91515061
  MAC Viper Flightcase XIP Upgrade Kit: P/N MAR-91515062
  Additional SiP Foam Flightcase Insert for MAC Viper XIP: P/N MAR-91611863HU
  Additional SiP Foam Flightcase Insert for MAC Viper XIP / MAC Encore Two: MAR-91611866HU

  Consumables
  Air filter, MAC Quantum / MAC Ultra / MAC Viper XIP / MAC Encore Two, set of 12: P/N 50400765
  CR123A 3-volt lithium battery: P/N 05801011

  Power Input Cables
  Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
  Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173

  Power Linking Cables
  Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
  Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

  Power Connectors
  Cable Connector, Neutrik powerCON TRUE1 TOP Female: P/N 91611789HU
  Cable Connector, Neutrik PowerCON TRUE1 TOP Male: P/N 91611788HU

  Installation Hardware
  G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
  Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
  Half-coupler Clamp: P/N 91602005
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

  Verified Third-Party Accessories

  Beam Control
  MAC Viper XIP / MAC Encore Two Concentric Ring: P/N City Theatrical 2816
  MAC Viper XIP / MAC Encore Two Hexcel Louver: P/N City Theatrical 2817

  FollowSpot
  MAC Viper XIP / MAC Encore Two FolowSpot Handle: P/N City Theatrical 2815

  Universal Connect Module
  Multiverse Connect Module 2.4GHz: P/N City Theatrical 5914
  Multiverse Connect Module 900MHz: P/N City Theatrical 5915

  Ordering Information MAC Viper XIP in Cardboard (in cardboard box with EPS, reused material): P/N MAR-90250300HU MAC Viper XIP White in Cardboard (in cardboard box with EPS, reused material): P/N MAR-90250310HU MAC Viper XIP in SIP (in cardboard box with SIP foam flight case insert): P/N MAR-90250305HU

• 
  14 Tháng ba, 2024
  Martin Professional Introduces MAC Viper XIP High-Output, Full-Featured Outdoor Moving Head

Selecting the Best Moving Head Lights for Outdoor Festivals

Defying the Elements: Inside Martin’s Trailblazing XIP Weatherproof Lighting Technology

• Đăng ký MAC Viper XIP của bạn
• Liên hệ Hỗ trợ Kỹ thuật
• Trung tâm trợ giúp 24/7