Martin Exterior Wash 220

较大的图像

库存有限 - 请联系您的经销商了解详情

Exterior™ Wash 220 是一款功能强大、结构紧凑且能效卓越的LED照明灯具，专为中型建筑物和建筑立面照明而设计。可选的低调遮光罩与灯具光滑的设计完美融合。该产品配备内置显示屏便于使用，提供多种光束角选择，且具有完全IP等级认证，适合永久户外使用。

Exterior Wash 220 设计用于可变色温（2700K-6500K）应用，采用独立的2700K和6500K LED光源。

了解有关我们产品验证与可靠性的更多信息

可变色温控制，6种光束角选择
功能完善的低调可选遮光罩，与灯具设计完美融合
支持DMX、RDM和OLED显示屏控制

视频

特点

功能强大的LED（2700K、6500K）
全白光时最高9300 流明
六种不同的光束角选项
内置电源和控制功能（DMX、RDM和OLED显示屏）
坚固耐用的IP66外壳
0–100%亮度控制

性能

物理特性长度: 270 mm (10.7 in.) 宽: 334 mm (13.2 in.) 高: 382 mm (15.1 in.) 重量: 13.0 kg (28.7 lbs.)

Dynamic Effects Intensity: 0 - 100% Color temperature control: 2700 K - 6500 K

Control and Programming Control systems: DMX, RDM Stand-alone control: Up to 20 scenes with global fade/hold times Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3 Receiver: RS-485 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Serial upload via DMX link

Optics Light source: 2700 K and 6500 K LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:
No diffuser: 7.5°
Narrow diffuser: 11.5°
Medium diffuser: 25°
Wide diffuser: 36°
Very wide diffuser: 60°
Asymmetric diffuser: 59° x 14.5°
Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration *Figure obtained under manufacturer's test conditions

Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 9300 lumens*
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction Housing: Cast aluminum 颜色: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.1 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
0,7g RMS Random (IEC 60068-2-64)

Installation 装配: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)

Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage
功耗
: 4 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 10.3 A Maximum total power consumption: 185 W Surge protection: 4 KV Max earth leakage: 0.50 mA

Typical Power and Current 100 V, 60 Hz: 1.6 A, 162 W, PF 0.99 120 V, 60 Hz: 1.35 A, 160 W, PF 0.99 230 V, 50 Hz: 0.75 A, 160 W, PF 0.94 277 V, 60 Hz: 0.65 A, 160 W, PF 0.93 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal 散热: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F) Total heat dissipation (calculated, +/- 10%): 485 BTU/hr
*Above this temperature, the fixture regulates output to protect from overheating
**Power must be maintained below -20° C (-4° F)

Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 58 lm/w LWR*: 715 lm/kg (324 lm/lb)
LWR = Lumen-to-Weight Ratio

Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM India: BIS

Included Items Cover plate for control panel

Related Items Martin Companion Cable: P/N 91616091

Accessories Exterior Wash 200 Series, narrow diffuser kit: P/N 91610154 Exterior Wash 200 Series, medium diffuser kit: P/N 91610153 Exterior Wash 200 Series, wide diffuser kit: P/N 91610152 Exterior Wash 200 Series, very wide diffuser kit: P/N 91610151 Exterior Wash 200 Series, asymmetric diffuser kit: P/N 91610150 Exterior Wash 200 Series, glare shield / snoot: P/N 91611745 Exterior Wash 200 Honeycomb Louvre: P/N 91611857

Ordering Information Exterior Wash 220, 7°, EU, aluminum: P/N 90509089 Exterior Wash 220, 7°, US, aluminum: P/N 90509091

下载

Specifications

	版本	语言	大小	上传日期
Exterior Wash 220 Spec Sheet-English 版本 B, 更新: 11月 2018	B		699.8 KB	11月 2018
Exterior Wash System Diagrams 版本 B, 更新: 10月 2020	B		295.1 KB	10月 2020

Manuals

	版本	语言	大小	上传日期
Exterior Wash 200 Series - User Manual 版本 M, 更新: 7月 2023	M		1.3 MB	7月 2023
Exterior Wash 200 Serie - Bedienungsanleitung 版本 A, 更新: 7月 2020	A		875.7 KB	7月 2020
Exterior Wash 200 Series - Manuel d'utilisation 版本 A, 更新: 10月 2020	A		661.7 KB	10月 2020

Photometrics

	版本	语言	大小	上传日期
Exterior Wash 220 - Photometric Files 版本 A, 更新: 3月 2024	A		458.8 KB	3月 2024

Illustrations

	版本	语言	大小	上传日期
Exterior Wash 200 Series (With-snoot) - 2D dimensions (DWG) 版本 A, 更新: 10月 2020	A		7.4 MB	10月 2020
Exterior Wash 200 Series (no-snoot) - 2D dimensions (PDF) 版本 A, 更新: 10月 2020	A		1.9 MB	10月 2020
Exterior Wash 200 Series (no-snoot) - 2D dimensions (DWG) 版本 A, 更新: 10月 2020	A		7.9 MB	10月 2020
Exterior Wash 200 Series (With-snoot) - 2D dimensions (PDF) 版本 A, 更新: 10月 2020	A		1.8 MB	10月 2020

Symbols

	版本	语言	大小	上传日期
AutoCAD 2D Symbols 版本 2.9, 更新: 8月 2026	2.9		5.2 MB	8月 2026
AutoCAD 3D Symbols 版本 2.9, 更新: 8月 2026	2.9		24.6 MB	8月 2026
Vectorworks Symbols 版本 4.7, 更新: 8月 2026	4.7		286.4 MB	8月 2026

Compliances

	版本	语言	大小	上传日期
Exterior Wash 200 Series - EU Declaration of Conformity 版本 A, 更新: 10月 2020	A		95.0 KB	10月 2020
Exterior Wash Series - ETL Listing Verification 版本 B, 更新: 5月 2018	B		348.9 KB	5月 2018
Exterior Wash Series - Product Verification and Reliability Report 版本 C, 更新: 5月 2018	C		406.8 KB	5月 2018

Service Notes

	版本	语言	大小	上传日期
3D Partsfinder - Opening using Solid Works Composer Player 版本 4, 更新: 10月 2020	4		743.0 KB	10月 2020
Exterior products - Performing a vacuum test - Tech note 版本 H, 更新: 10月 2020	H		1018.6 KB	10月 2020
EW series Incorrect warning print 更新: 5月 2018				5月 2018