Martin Alien LED Downlight

Grandes images

Cette gamme de downlights LED encastrés prêts à l'emploi propose un mélange de couleurs RGB+W conçu pour l'éclairage d'accentuation en lumière blanche variable ou colorée. Avec son indice de protection IP67 robuste, l'Alien LED Downlight convient aussi bien aux environnements intérieurs qu'extérieurs.

Caractéristiques

5 ou 9 LED en 4 couleurs : rouge, vert, bleu et blanc
Choix entre 9 watts Standard ou 18 watts High-Power
Mélange de couleurs RGBW, température de couleur variable
Choix de systèmes optiques : moyen ou large
Contrôle d'intensité 0-100 %
Contrôle DMX via unité de commande
Choix de modes de contrôle DMX : RGBW, HSI
Bagues de finition : acier inoxydable en standard, chrome, blanc ou laiton en options
Indice d'étanchéité : IP67

plus de détails

Physical Installation depth: 69 mm Maximum protrusion from mounting surface: 6 mm Trim ring outer diameter: 85 mm Diameter of luminaire at widest point: 63 mm Weight: 330 g incl. cable Length (transformer): 123 mm Width (transformer): 50 mm Height (transformer): 32 mm Weight (transformer): 385 g incl. cables

Dynamic Effects Color mixing: RGBW Red: 0 - 100% Green: 0 - 100% Blue: 0 - 100% White: 0 - 100%

Control and Programming Required control hardware: Alien LED Downlight Driver Unit (ordered separately, drives up to 20 std. or 10 high-power luminaires) Color control modes: RGBW, HSI DMX channels: 4 per independently controlled luminaire or group of luminaires Protocol: USITT DMX512-A DMX address setting: DIP switch on Driver Unit Stand-alone options: 31 pre-programmed static/dynamic scenes/sequences in Driver Unit

Optics Light source: Luxeon Rebel high power emitters Total LED power: 9 W (approx.) per standard luminaire, 18 W (appox.) per high-power luminaire Super-wide lens available:

Construction Housing: Steel & aluminum Housing (transformer): Flame-retardant plastic Trim ring: Brushed stainless (standard), chrome, white or brass Protection rating: IP67 Protection rating (transformer): IP20

Installation Location: Recessed, ceiling or wall Orientation: Any Minimum clearance around device: 50 mm Ceiling thickness: 5 mm - 22 mm Luminaire external thread for retaining nut: 2-inch BSP Diameter of mounting hole: 70 mm with plasterboard retainer, 63 mm with 2" BSP nut Max. cable length, driver unit to last transformer on link: 50 m Max. cable length, driver unit to daisy-chained driver unit: 50 m Max. cable length, transformer to luminaire: 1.5 m

Connections Driver Unit combined power & data outputs to transformers: Two IEC female sockets Power & data input to transformer: 1.5 m cable with IEC male connector (C14 line plug) Power & data throughput from transformer: 1.5 m cable with IEC female connector (C13 line socket) Transformer output to luminaire(s): RJ-45 socket T-connector for use with two standard luminaires: RJ-45 sockets

Electrical AC power: Supplied by Driver Unit via combined power & data cable Standby power: Driver unit with 1 head 4 W; Driver unit with 10 heads 14 W

Typical Power and Current Driver unit with 1 head (1 high-power or 2 standard luminaires): 100-120 V, 50/60 Hz: 18 W, 0.2 A, PF 0.98 208-240 V, 50/60 Hz: 18 W, 0.1 A, PF 0.86 Driver unit with 10 heads (10 high-power or 20 standard luminaires): 100-120 V, 50/60 Hz: 180 W, 1.4 A, PF 0.98 208-240 V, 50/60 Hz: 180 W, 0.8 A, PF 0.96 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:

Thermal Cooling: Convection Maximum ambient temperature (Ta max.): Luminaire 45° C, transformer 40° C Minimum ambient temperature (Ta min.): Luminaire -25° C, transformer 0° C Maximum surface temperature, steady state, Ta=45° C: Standard luminaire 80° C, high-power luminaire 85° C, transformer 70° C Total heat dissipation per head (i.e. one high-power or two standard luminaires), calculated, +/- 10%: 62 BTU/hr.

Approvals EU safety: BSEN 60598-1, BSEN 60598-2-2 (luminaire), BSEN 61347-1, BSEN 61347-2-13 (transformer) EU EMC: EN 55 015, EN 55 103, EN 61 000-3 US safety: UL 1598 (luminaire), UL 1310 (transformer) Canadian safety: CSA C22.2 No. 250 (luminaire), CSA C22.2 No. 223 (transformer)

Included Items Two standard-power luminaires, one transformer, all cables and connectors (Standard Downlight Set): One high-power luminaire, one transformer, all cables and connectors (High-Power Downlight Set): Driver unit, 3-pin male XLR-to-RJ-45 adapter, user manual (Downlight Driver Unit):

Accessories Chrome trim ring: 91611301 Brass trim ring: 91611302 White trim ring: 91611303 DMX termination plug, RJ-45: 91613028

Ordering Information Alien LED Standard Downlight Set: 90353000 Alien LED High-Power Downlight Set: 90353040 Alien LED Downlight Driver Unit: 90734510

Téléchargements

Manuals

	Version	Langue	Taille	Téléchargé
Light Fox, Exterior 200 LED, Alien LED Downlight, MAC 700 Profile- Manual de instrucciones version C, mis à jour : oct. 2020	C		356 ko	oct. 2020
Alien LED Downlight, Alien LED Driver- Manuel d‘utilisation version C, mis à jour : mai 2018	C		552 ko	mai 2018
Alien LED Downlight- Manual de instrucciones version C, mis à jour : mai 2018	C		708 ko	mai 2018
Alien LED Downlight - User manual version D, mis à jour : mai 2018	D		474 ko	mai 2018
Alien LED Downlight- Bedienungsanleitung version C, mis à jour : mai 2018	C		592 ko	mai 2018
LC Series, Exterior 200 LED, Alien LED Downlight, Alien LED Driver- Manuel d‘utilisation version C, mis à jour : oct. 2020	C		1,44 Mo	oct. 2020

Compliances

	Version	Langue	Taille	Téléchargé
ETL Authorization To Mark, Transformer version A, mis à jour : oct. 2020	A		62,5 ko	oct. 2020
ETL Authorization To Mark, Alien LED Downlight version A, mis à jour : oct. 2020	A		57,3 ko	oct. 2020

Si l'un des liens ci-dessus affiche des caractères étranges dans votre navigateur, faites un clic droit sur le fichier pour l'enregistrer sur votre ordinateur.