Exterior Wash 310
Fuori produzione

Outdoor rated QUAD color mixing wash light

Immagini più grandi

Limited quantity available - please contact your dealer for information

Exterior Wash™ 310 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 310 is designed for superior color mixing applications and is based on quad-color premixed LEDs.

Learn more about our product verification and reliability

  • Uniform color mixing with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display

Video

 

 

Caratteristiche

  • Powerful premixed LEDs
  • Up to 8300 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0 – 100% intensity control

Specifiche

  • Physical Length: 283 mm (11.2 in.) Width: 404 mm (15.9 in.) Height: 439 mm (17.3 in.) Weight: 19.0 kg (42.0 lbs.)
    Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW
    Control and Programming Control systems: DMX, RDM Stand-alone control: Up to 20 scenes with global fade/hold times Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3-5 depending DMX mode Receiver: RS-485 DMX compliance: USITT DMX512-A Firmware update: Serial upload via DMX link
    Optics Light source: 30 x RGBW quad-color LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:

    No diffuser: 11°
    Narrow diffuser: 13°
    Medium diffuser: 27°
    Wide diffuser: 43°
    Very wide diffuser: 62°
    Asymmetric diffuser: 66° x 15°

    Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 8300 lumens*

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.14 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 7 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 10.9 A Maximum total power consumption: 300 W Surge protection: 4 KV Max earth leakage: 0.25 mA
    Typical Power and Current 100 V, 60 Hz: 2.7 A, 270 W, PF 0.99 120 V, 60 Hz: 2.3 A, 265 W, PF 0.99 230 V, 50 Hz: 1.2 A, 260 W, PF 0.98 277 V, 60 Hz: 1.0 A, 260 W, PF 0.95 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 945 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 32 lm/W LWR*: 437 lm/kg (198 lm/lb)

    *LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM India: BIS
    Included Items Cover plate for control panel
    Related Items Martin Companion Cable: P/N 91616091
    Accessories Exterior Wash 300 Series, narrow diffuser kit: P/N 91610155 Exterior Wash 300 Series, medium diffuser kit: P/N 91610156 Exterior Wash 300 Series, wide diffuser kit: P/N 91610157 Exterior Wash 300 Series, very wide diffuser kit: P/N 91610158 Exterior Wash 300 Series, asymmetric diffuser kit: P/N 91610159 Exterior Wash 300 Series, glare shield / snoot: P/N 91611735 Exterior Wash 310 Honeycomb Louvre: P/N 91611837
    Ordering Information Exterior Wash 310, 10°, EU, aluminum: P/N 90507075 Exterior Wash 310, 10°, US, aluminum: P/N 90507085

Download

Specifications
  Versione Lingua Dimensione Caricato
file type icon Exterior Wash 310 Spec Sheet-English
en versione B, aggiornato: nov 2018
B  en  1,03 MB nov 2018
file type icon Exterior Wash System Diagrams
en versione B, aggiornato: ott 2020
B  en  295 KB ott 2020
Manuals
  Versione Lingua Dimensione Caricato
file type icon Exterior Wash 300 Series - User Manual
en versione L, aggiornato: dic 2020
L  en  3,08 MB dic 2020
file type icon Exterior Wash 300 Serie - Bedienungsanleitung
de versione A, aggiornato: ott 2020
A  de  949 KB ott 2020
file type icon Exterior Wash 300 Series - Manuel d'utilisation
fr versione B, aggiornato: ott 2020
B  fr  704 KB ott 2020
Photometrics
  Versione Lingua Dimensione Caricato
file type icon Exterior Wash 310 - Photometric Files
en versione A, aggiornato: mar 2024
A  en  652 KB mar 2024
Illustrations
  Versione Lingua Dimensione Caricato
A  en  10,9 MB ott 2020
A  en  2,59 MB ott 2020
A  en  3,28 MB ott 2020
A  en  16,4 MB ott 2020
Symbols
  Versione Lingua Dimensione Caricato
file type icon AutoCAD 2D Symbols
en versione 2.9, aggiornato: ago 2026
2.9  en  5,2 MB ago 2026
file type icon AutoCAD 3D Symbols
en versione 2.9, aggiornato: ago 2026
2.9  en  24,6 MB ago 2026
file type icon Vectorworks Symbols
en versione 4.7, aggiornato: ago 2026
4.7  en  286 MB ago 2026
CAD Drawings
  Versione Lingua Dimensione Caricato
file type icon Exterior Wash Series 3D (3DS-STEP-DWG)
en versione A, aggiornato: mag 2018
A  en  56,5 MB mag 2018
BIM Objects
  Versione Lingua Dimensione Caricato
file type icon Exterior Wash 310 - BIM Object
en versione A, aggiornato: set 2021
A  en  set 2021
Compliances
  Versione Lingua Dimensione Caricato
A  en  95 KB ott 2020
file type icon Exterior Wash Series - ETL Listing Verification
en versione B, aggiornato: mag 2018
B  en  349 KB mag 2018
C    407 KB mag 2018
Service Notes
  Versione Lingua Dimensione Caricato
4    743 KB ott 2020
H  en  1020 KB ott 2020
EW series Incorrect warning print
aggiornato: mag 2018
      mag 2018
Tech Notes
  Dimensione Caricato
file type icon EW-Series UV Warning Printing
aggiornato: gen 2018
gen 2018
Firmware
  Versione Dimensione Caricato
download icon for Exterior Wash 310 - Firmware Exterior Wash 310 - Firmware
versione 2.2.0, aggiornato: set 2026
2.2.0   set 2026

Se uno dei link sopra produce caratteri strani nel tuo browser, fai clic destro sul file per salvarlo sul tuo computer.

Notizie

Supporto/FAQ

HARMAN Professional Solutions: