Exterior Wash 310
Utgått

Utomhuskvalificerad QUAD färgblandande tvättljus

Exterior Wash 310
Större bilder

Begränsad tillgänglighet – kontakta din återförsäljare för information

Exterior Wash™ 310 är en kraftfull, kompakt och energieffektiv LED-belysningsarmatur utformad för att bellysa stora strukturer, byggnadsfasader och broar. Ett diskret, valfritt snoot integreras sömlöst med armaturernas eleganta design. Den har inbyggd display för enkel användning, ett brett urval av strålningsvinklar och är helt IP-klassificerad för permanent utomhusbruk.

Exterior Wash 310 är utformad för överlägsen färgblandning och bygger på quad-color förbrlandade LED:ar.

Läs mer om vår produktverifiering och tillförlitlighet

  • Enhetlig färgblandning med 6 strålningsvinkelalternativ
  • Funktionellt och diskret valfritt snoot som integreras med armaturernas design
  • Kontroll via DMX, RDM och OLED-display

Videor

 

 

Funktioner

  • Kraftfulla förmixa lysdioder
  • Upp till 8300 lumen vid fullvit (RGBW)
  • Sex olika strålvinkelalternativ
  • Intern strömförsörjning och kontroll (DMX, RDM och OLED-display)
  • Robust IP66-hölje
  • Intensitetskontroll 0–100 %

Specifikationer

  • Physical Length: 283 mm (11.2 in.) Width: 404 mm (15.9 in.) Height: 439 mm (17.3 in.) Weight: 19.0 kg (42.0 lbs.)
    Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW
    Control and Programming Control systems: DMX, RDM Stand-alone control: Up to 20 scenes with global fade/hold times Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3-5 depending DMX mode Receiver: RS-485 DMX compliance: USITT DMX512-A Firmware update: Serial upload via DMX link
    Optics Light source: 30 x RGBW quad-color LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:

    No diffuser: 11°
    Narrow diffuser: 13°
    Medium diffuser: 27°
    Wide diffuser: 43°
    Very wide diffuser: 62°
    Asymmetric diffuser: 66° x 15°

    Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 8300 lumens*

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.14 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 7 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 10.9 A Maximum total power consumption: 300 W Surge protection: 4 KV Max earth leakage: 0.25 mA
    Typical Power and Current 100 V, 60 Hz: 2.7 A, 270 W, PF 0.99 120 V, 60 Hz: 2.3 A, 265 W, PF 0.99 230 V, 50 Hz: 1.2 A, 260 W, PF 0.98 277 V, 60 Hz: 1.0 A, 260 W, PF 0.95 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 945 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 32 lm/W LWR*: 437 lm/kg (198 lm/lb)

    *LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM India: BIS
    Included Items Cover plate for control panel
    Related Items Martin Companion Cable: P/N 91616091
    Accessories Exterior Wash 300 Series, narrow diffuser kit: P/N 91610155 Exterior Wash 300 Series, medium diffuser kit: P/N 91610156 Exterior Wash 300 Series, wide diffuser kit: P/N 91610157 Exterior Wash 300 Series, very wide diffuser kit: P/N 91610158 Exterior Wash 300 Series, asymmetric diffuser kit: P/N 91610159 Exterior Wash 300 Series, glare shield / snoot: P/N 91611735 Exterior Wash 310 Honeycomb Louvre: P/N 91611837
    Ordering Information Exterior Wash 310, 10°, EU, aluminum: P/N 90507075 Exterior Wash 310, 10°, US, aluminum: P/N 90507085

Nedladdningar

Specifications
  Version Språk Storlek Uppladdat
file type icon Exterior Wash 310 Spec Sheet-English
en version B, uppdaterad: nov 2018
en  1,03 MB nov 2018
file type icon Exterior Wash System Diagrams
en version B, uppdaterad: okt 2020
en  295 KB okt 2020
Manuals
  Version Språk Storlek Uppladdat
file type icon Exterior Wash 300 Series - User Manual
en version L, uppdaterad: dec 2020
en  3,08 MB dec 2020
file type icon Exterior Wash 300 Serie - Bedienungsanleitung
de version A, uppdaterad: okt 2020
de  949 KB okt 2020
file type icon Exterior Wash 300 Series - Manuel d'utilisation
fr version B, uppdaterad: okt 2020
fr  704 KB okt 2020
Photometrics
  Version Språk Storlek Uppladdat
file type icon Exterior Wash 310 - Photometric Files
en version A, uppdaterad: mar 2024
en  652 KB mar 2024
Illustrations
  Version Språk Storlek Uppladdat
en  10,9 MB okt 2020
en  2,59 MB okt 2020
en  3,28 MB okt 2020
en  16,4 MB okt 2020
Symbols
  Version Språk Storlek Uppladdat
file type icon AutoCAD 2D Symbols
en version 2.8, uppdaterad: jan 2026
2.8  en  4,42 MB jan 2026
file type icon AutoCAD 3D Symbols
en version 2.8, uppdaterad: jan 2026
2.8  en  18,7 MB jan 2026
file type icon Vectorworks Symbols
en version 4.6, uppdaterad: jan 2026
4.6  en  249 MB jan 2026
CAD Drawings
  Version Språk Storlek Uppladdat
file type icon Exterior Wash Series 3D (3DS-STEP-DWG)
en version A, uppdaterad: maj 2018
en  56,5 MB maj 2018
BIM Objects
  Version Språk Storlek Uppladdat
file type icon Exterior Wash 310 - BIM Object
en version A, uppdaterad: sep 2021
en  sep 2021
Compliances
  Version Språk Storlek Uppladdat
en  95 KB okt 2020
file type icon Exterior Wash Series - ETL Listing Verification
en version B, uppdaterad: maj 2018
en  349 KB maj 2018
  407 KB maj 2018
Service Notes
  Version Språk Storlek Uppladdat
  743 KB okt 2020
en  1020 KB okt 2020
EW series Incorrect warning print
uppdaterad: maj 2018
      maj 2018
Tech Notes
  Storlek Uppladdat
file type icon EW-Series UV Warning Printing
uppdaterad: jan 2018
jan 2018
Firmware
  Version Storlek Uppladdat
download icon for Exterior Wash 310 - Firmware Exterior Wash 310 - Firmware
version 2.2.0, uppdaterad: jun 2026
2.2.0   jun 2026

Om någon av länkarna ovan resulterar i konstiga tecken i din webbläsare, högerklicka på filen för att spara den på din dator.

Nyheter

Support/FAQ

HARMAN Professional Solutions: