Martin RUSH MH 6 Wash CT

Immagini più grandi

The RUSH MH 6 Wash CT is designed for key lighting applications within the House of Worship, Performing Arts and Live Stage environments where color temperature control of white light is critical but also a compact and light weight design is desired for smaller applications

The RUSH MH 6 WASH CT is a bright single-lens LED moving head with fully premixed white color temperatures. With twelve 10W WW/CW (warm white and cold white) LEDs and a 10° to 60° motorized zoom, it offers full electronic dimming and variable strobe effects controlled via DMX.

Pre mixed white light ranging from 2,700K to 7,800K
10-60 Degree Zoom System
Compact and Lightweight Design

Caratteristiche

2,700K to 7,800K Color Temp Range
Allows key lighting to be matched for multiple sources from Tungsten to Metal Halide
10-60 Degree Zoom System
Compact and lightweight design
Can be used as a Mid effect with a tight beam look to washing a stage for key lighting applications
Ideal for applications that have limited ceiling height or weight restrictions.

Specifiche

Physical Length: 290 mm (11.4 in.) Width: 189 mm (7.4 in.) Height: 360 mm (14.2 in.) Weight: 7.1 kg (15.7 lbs.)

Dynamic Effects Zoom: Motorized Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout Pan: 540° Tilt: 200°

Control and Programming Control options: DMX 16-bit fine control: Dimming, pan and tilt DMX address setting: Control panel with LCD display DMX channels: 14 DMX compliance: USITT DMX512/1990

Optics Zoom range: 10° - 60° Light source: 12 x 10W OSRAM OSTAR WW/CW LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* Binning: Tight color and flux binning *Figure obtained under manufacturer's test conditions.

Construction Housing: High-impact flame-retardant thermoplastic Color: Black Ingress protection rating: IP20

Installation Mounting points: One quarter‐turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm (4 in.) Minimum distance to illuminated surfaces: 200 mm (8 in.) Minimum clearance around fan and air vents: 100 mm (4 in.)

Connections AC power in, thru: Neutrik PowerCon DMX data in, thru: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 3.15 A Typical half-cycle RMS inrush current: 11.3 A (at 240 VAC) Recommended Miniature Circuit Breaker: Type D*
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)

Approvals EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573, UL 8750 US EMC: CFR Title 47 Part 15 Canadian safety: CSA C22.2 No. 166 Australia/NZ: C-TICK N4241 / RCM

Included Items
Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
Omega bracket for rigging clamp attachment

Related Items Martin™ RDM 5.5 Splitter: P/N 90758150 Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com

Accessories Power connectors:
Power Connector PowerCON Male: P/N 91611795
Power Connector PowerCON Female : P/N 91611794
Cables, 16 A, for relaying power in chains:
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176
Cables, 16 A, for power input:
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
(H07RN-F are European approved cables, SJOOW are US approved cables)
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information RUSH MH 6 Wash™ CT in cardboard box: P/N 90280090

Download

Specifications

	Lingua	Dimensione	Caricato
RUSH MH 6 Wash CT Spec Sheet-English aggiornato: lug 2018		1,44 MB	lug 2018

Manuals

	Versione	Lingua	Dimensione	Caricato
RUSH MH 6 Wash CT - Manuel d'utilisation versione B, aggiornato: mag 2018	B		1,1 MB	mag 2018
RUSH MH 6 Wash CT - User Manual versione C, aggiornato: mag 2018	C		626 KB	mag 2018
RUSH MH 6 Wash CT - Bedienungsanleitung versione B, aggiornato: mag 2018	B		957 KB	mag 2018

Photometrics

	Versione	Lingua	Dimensione	Caricato
RUSH MH 6 Wash CT - Photometric Files versione A, aggiornato: mar 2024	A		265 KB	mar 2024

Illustrations

	Versione	Lingua	Dimensione	Caricato
RUSH MH 6 Wash - 2D (PDF) versione A, aggiornato: mag 2018	A		637 KB	mag 2018
RUSH MH 6 Wash - 2D (DWG) versione A, aggiornato: mag 2018	A		528 KB	mag 2018

Symbols

	Versione	Lingua	Dimensione	Caricato
Vectorworks Symbols versione 4.6, aggiornato: gen 2026	4.6		249 MB	gen 2026

CAD Drawings

	Versione	Lingua	Dimensione	Caricato
Rush MH 6 Wash - 3D (DWG) versione A, aggiornato: mag 2018	A		4,85 MB	mag 2018

Compliances

	Versione	Lingua	Dimensione	Caricato
RUSH MH 6 Wash - ETL Listing Verification versione A, aggiornato: mag 2018	A		381 KB	mag 2018
RUSH MH 6 Wash - EU Declaration of Conformity versione A, aggiornato: mag 2018	A		41,9 KB	mag 2018

Service Notes

	Versione	Lingua	Dimensione	Caricato
3D Partsfinder - Opening using Solid Works Composer Player versione 4, aggiornato: ott 2020	4		743 KB	ott 2020

Tech Notes

	Dimensione	Caricato
Avoiding damage from sunlight and other light sources aggiornato: set 2017		set 2017

Hints and Tips

	Versione	Lingua	Dimensione	Caricato
Avoiding damage from sunlight and other light sources versione B, aggiornato: mag 2018	B			mag 2018

Firmware

	Versione	Dimensione	Caricato
RUSH MH 6 Wash CT - Firmware versione 2.0, aggiornato: mag 2026	2.0		mag 2026

Se uno dei link sopra produce caratteri strani nel tuo browser, fai clic destro sul file per salvarlo sul tuo computer.

Notizie

05 settembre 2018
The Church of the Highlands Elevates the Worship Experience with Martin By HARMAN
11 luglio 2018
ACLX Delivers Immersive Lighting Experiences with HARMAN Professional Solutions
14 agosto 2017
Cornerstone Live Music Venue Delivers a World-Class Audio and Visual Experience with HARMAN Professional Solutions

Supporto/FAQ

HARMAN Professional Solutions:

find_dealer

have_question

Supporto Consulenti

RUSH MH 6 Wash CT
Fuori produzione