RUSH MH 6 Wash CT

Larger Images

The RUSH MH 6 Wash CT is designed for key lighting applications within the House of Worship, Performing Arts and Live Stage environments where color temperature control of white light is critical but also a compact and light weight design is desired for smaller applications

The RUSH MH 6 WASH CT is a bright single-lens LED moving head with fully premixed white color temperatures. With twelve 10W WW/CW (warm white and cold white) LEDs and a 10° to 60° motorized zoom, it offers full electronic dimming and variable strobe effects controlled via DMX.

  • Pre mixed white light ranging from 2,700K to 7,800K    
  • 10-60 Degree Zoom System
  • Compact and Lightweight Design

Features

  • 2,700K to 7,800K Color Temp Range
  • Allows key lighting to be matched for multiple sources from Tungsten to Metal Halide
  • 10-60 Degree Zoom System
  • Compact and lightweight design
  • Can be used as a Mid effect with a tight beam look to washing a stage for key lighting applications
  • Ideal for applications that have limited ceiling height or weight restrictions.

Tech Specs

PhysicalLength: 290 mm (11.4 in.)Width: 189 mm (7.4 in.)Height: 360 mm (14.2 in.)Weight: 7.1 kg (15.7 lbs.)
Dynamic EffectsColor temperature: 2700 K - 7800 KColor temperature presets: 2700 K to 7800 K in ~100 K stepsElectronic dimming: 16-bit, 0 - 100%, four dimming curve optionsStrobe and pulse effects: Variable speed and action, random strobeElectronic 'shutter' effect: Instant open and blackoutZoom: Motorized, 10 - 60°Pan: 540°, 16-bit controlTilt: 220°, 16-bit control
Control and ProgrammingControl options: DMXDMX channels: 1216-bit fine control: Dimming, pan and tiltDMX address setting: Control panel with LCD displayDMX compliance: USITT DMX512/1990
OpticsLight source: 12 x 10 W CWUW LEDsMinimum LED lifetime: 50 000 hours (to >70% luminous output)*Zoom range: 10° - 60°*Figure obtained under manufacturer's test conditions
ConstructionHousing: High-impact flame-retardant thermoplasticColor: BlackIngress protection rating: IP20
InstallationMounting points: One quarter‐turn bracket for rigging clampLocation: Indoor use only, must be fastened to surface or structureOrientation: AnyMinimum distance to illuminated surfaces: 200 mm (8 in.)Minimum distance to combustible materials: 100 mm (4 in.)Minimum clearance around fans and vents: 100 mm (4 in.)
ConnectionsAC power input: Neutrik PowerConAC power throughput: Neutrik PowerConDMX data in/out: 3-pin and 5-pin locking XLR
ElectricalAC power: 100-240 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modeFuse: T 3.15 ARecommended Miniature Circuit Breaker*: Type D* Per IEC 60898/UL489/CSA C22.2 No. 5Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current120 V, 60 Hz: 1.3 A, 150 W, PF 0.99230 V, 50 Hz: 0.7 A, 150 W, PF 0.94Typical half-cycle RMS inrush current at 240 VAC: 11.3 AMeasurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
ThermalCooling: Forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)
ApprovalsEU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety: UL 1573, UL 8750US EMC: CFR Title 47 Part 15Canadian safety: CSA C22.2 No. 166Australia/NZ: C-TICK N4241 / RCM
  
Included ItemsPower input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plugOmega bracket for rigging clamp attachment
AccessoriesCablesPower input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511Power connectorsNeutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805DMX linkDMX termination plug, 3-pin male XLR: P/N 91613017Installation hardwareHalf-coupler clamp: P/N 91602005G-clamp: P/N 91602003Quick-trigger clamp: P/N 91602007Safety cable, safe working load 50 kg: P/N 91604003
Related ItemsRUSH™ Software Uploader 1: P/N 91611399
Ordering InformationRUSH™ MH 6 Wash CT in cardboard box: P/N 90280090

Specifications

  • Physical Height: 360 mm (14.2 in.) Length: 290 mm (11.4 in.) Weight: 7.1 kg (15.7 lbs.) Width: 189 mm (7.4 in.) Dynamic Effects Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Color mixing: RGBW Color presets: 36 color presets plus full white, ‘color wheel’ effects Electronic shutter effect: Instant open and blackout Zoom: Motorized Pan: 540° Tilt: 200° Control and Programming Control options: DMX 16-bit fine control: Dimming, pan and tilt White balance control: RGB adjustment DMX channels: 14 DMX address setting: Control panel with LCD display DMX compliance: USITT DMX512/1990 Optics Zoom range: 10° - 60° Light source: 12 x 10 W RGBW Osram Ostar LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions. Construction Housing: High-impact flame-retardant thermoplastic Color: Black Ingress protection rating: IP20 Installation Minimum clearance around fan and air vents: 100 mm (4 in.) Mounting points: One quarter‐turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm (4 in.) Minimum distance to illuminated surfaces: 200 mm (8 in.) Connections AC power in, thru: Neutrik PowerCon DMX data in, thru: 3-pin and 5-pin locking XLR
  • Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 3.15 A Typical half-cycle RMS inrush current: 11.3 A (at 240 VAC) Recommended Miniature Circuit Breaker: Type D*

    *Per IEC 60898/UL489/CSA C22.2 No. 5
    Power consumption figures are typical, not maximum. Allow for +/-10% variation.

    Typical Power and Current 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Approvals EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573, UL 8750 US EMC: CFR Title 47 Part 15 Canadian safety: CSA C22.2 No. 166 Australia/NZ: C-TICK N4241 / RCM Included Items

    Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
    Omega bracket for rigging clamp attachment

    Accessories Cables:

    Power input cable, AWG 14, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508
    Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509
    Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510
    Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511

    Power connectors:

    Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
    Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805

    DMX link:

    DMX termination plug, 3-pin male XLR: P/N 91613017

    Installation hardware:

    Half-coupler clamp: P/N 91602005
    G-clamp: P/N 91602003
    Quick-trigger clamp: P/N 91602007
    Safety cable, safe working load 50 kg: P/N 91604003

    Related Items RUSH® Software Uploader 1: P/N 91611399 Ordering Information RUSH MH 6 Wash™ CT in cardboard box: P/N 90280090

Downloads

  Version Language Size Uploaded
Specifications
RUSH MH 6 Wash CT Spec Sheet-English   en  1.44 MB Jul 09, 2018
Manuals
RUSH MH 6 Wash CT - Manuel d'utilisation fr  1.1 MB Mar 14, 2016
RUSH MH 6 Wash CT - User Manual en  626 KB Nov 21, 2016
RUSH MH 6 Wash CT - Bedienungsanleitung de  957 KB May 12, 2016
Illustrations
RUSH MH 6 Wash - 2D (DWG) en  528 KB Aug 14, 2015
RUSH MH 6 Wash - 2D (PDF) en  637 KB Aug 14, 2015
3D Symbols
Vectorworks Symbols 2.6  en  66.4 MB May 01, 2019
CAD Drawings
Rush MH 6 Wash - 3D (DWG) en  4.85 MB Jan 13, 2016
Compliances
RUSH MH 6 Wash - EU Declaration of Conformity en  41.9 KB Nov 03, 2015
RUSH MH 6 Wash - ETL Listing Verification en  381 KB Nov 03, 2015
Software
RUSH MH 6 CT- Software 1.1  en  170 KB Nov 15, 2016
RUSH MH 6 CT - Software en  72.5 KB Jan 13, 2016
Service Notes
3DPartsfinder Using Solid Works Composer Player     Sep 22, 2017
3DPartsfinder using Solid Works Composer player en    Mar 04, 2016
Tech Notes
Avoiding damage from sunlight and other light sources     Sep 22, 2017
Hints And Tips
Avoiding damage from sunlight and other light sources en    Dec 09, 2012

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

News

Support/FAQs