• Physical

  Width (across yoke): 338 mm (13.31 in.)
  Width (base): 306 mm (12.05 in.)
  Height (head forward): 387 mm (15.24 in.)
  Height (maximum): 421 mm (16.57 in.)
  Depth (head): 205 mm (8.07 in.)
  Depth (base): 226 mm (8.90 in.)
  Minimum center-to-center distance in side-by-side installation: 350 mm (14 in.)
  Weight: 8.95 kg (19.73 lbs.)

  Dynamic Effects

  Beam Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe, instant open and blackout
  Beam Dimming options: Choice of four dimming curves
  Beam Color Mixing: RGB(W), independently variable 0 - 100%
  Beam Color Temperature Control: Variable 2,000 – 12,850 K
  Beam Tint Control: Variable green-magenta shift Δuv -0.05 – +0.05
  Beam Virtual Color wheel: 48 color presets, continuous rotation & random color
  Zoom: Motorized with 1:6 zoom ratio
  Pan: Motorized 540°
  Tilt: Motorized 220°
  Beam PixelMapping: Individual RGB control of each of the 7 Beam pixels
  Beam P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
  Aura Dimmer/Shutter: 0 – 100% continuous dimming, regular and random strobe, instant open and blackout
  Aura Dimming options: Choice of four dimming curves
  Aura Color Mixing: RGB, independently variable 0 - 100%
  Aura Color Temperature Control: Variable 2,000 – 12,850 K
  Aura Tint Control: Variable green-magenta shift Δuv -0.05 – +0.05
  Aura Virtual Color wheel: 48 color presets, continuous rotation & random color
  Aura PixelMapping: Individual RGB control of each of the 12 Aura filaments
  Aura P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
  Pre-programmed effects: Two ranges of FX on Beam, Aura or Combination; independent or synchronized/combined; featuring foreground color, background color, speed and direction control
  LED Frequency control: Variable LED PWM control

  Control and Programming

  Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and Martin P3
  Protocol Detection: Automatic
  DMX Modes: Compact, Basic, Extended, Ludicrous, Compact Direct, XB Standard & XB Extended
  DMX Channels: 20, 36, 57, 93, 20, 14 & 25
  Multi-Universe Overflow: No
  16-bit Controllable Parameters: Beam & Aura Dimming, Beam Color Mixing, Zoom, Pan and Tilt
  Setting and Addressing: Display Menu, RDM, RDM over Art-Net or Martin P3
  Local User Interface: Backlit LCD Display with battery-powered operation
  Fixture identification: User-settable ID number
  DMX Compliance: USITT DMX512-A
  RDM Compliance: ANSI/ESTA E1.20
  Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
  sACN Compliance: ANSI E1.31 - 2018
  Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer
  DMX/RDM Transceiver: Galvanic-isolated RS-485
  DMX/RDM Daisy-Chain Limit: 32 fixtures
  Ethernet Transceiver: 10/100Mbit (with fail-safe bypass)
  Ethernet Daisy-Chain Limit Recommendation: 50 fixtures
  Firmware Update: via USB type C memory device, via DMX using Martin Companion or via Ethernet using Martin Companion / P3 System Controller

  Optics

  Front Lens Diameter: 196 mm (7.72 in.)
  Zoom Range: 1:6
  Full Zoom Range at Half Peak (Beam Angle): 6.3° - 35.3°
  Full Zoom Range at Tenth Peak (Field Angle): 8.8° - 50.4°
  Beam Light Source: 7 x 60 W RGBW LED
  Aura Light Source: 12 x 4 W RGBW LED
  Max. Total Beam LED Engine Power: 296.5 W
  Max. Total Aura LED Engine Power: 35.1 W
  Minimum LED lifetime: > 50.000 hours (to > 70% luminous output)*
  *Figure obtained under manufacturer's test conditions

  Photometric Data

  Light Engine Luminous Output: 11,000 lumens
  Fixture Luminous Output Wide: 6,000 lumens
  Fixture Luminous Output Narrow: 4,500 lumens
  Peak Luminous Intensity Narrow: 360,000 cd
  CCT: Variable 2,000 K – 12,850 K (+/- 200 K)
  CRI (Color Rendering Index): ≥ 71
  CQS (Color Quality Scale): ≥ 80
  TM-30 Rf (IES TM-30-15 Fidelity Index): ≥ 78
  TM-30 Rg (IES TM-30-15 Gamut Index): ≥ 117
  TLCI (Television Lighting Consistency Index): ≥ 57
  Beam LED Refresh Rate: Variable 2,400 Hz - 3,000 Hz and 24,000 Hz mode (DMX controllable)
  Aura LED Refresh Rate: 1,200 Hz
  Binning: Tight color and flux binning
  Calibration: Full Gamut Color Calibration of Beam and Aura
  Color Modes: Direct Color Mode, Extended Gamut Mode and Calibrated Color Mode
  * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient
  * All Photometric Data measured at 6500 K white
  

  Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP54
  Installation Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets and single M12 threaded hole Location: Indoor or Temporary Outdoor use Orientation: Any, except with display/connectors facing upwards in outdoor application Minimum distance to combustible materials: 0.2 m (7.87 in.) Minimum distance to illuminated surfaces: 1.0 m (39.37 in.)
  Connections

  AC mains power in/thru: Neutrik powerCON TRUE1 TOP
  DMX and RDM data in/thru: Neutrik 5-pin locking XLR TOP
  Ethernet (Art-Net, sACN and Martin P3) in/thru, including fail-safe bypass: Neutrik etherCON TOP
  Firmware from flash memory: USB 2.0 type C port

  Electrical

  AC power: 100-240 V AC nominal, 50/60 Hz
  Power supply unit: Auto-ranging electronic switch mode
  Typical half-cycle RMS inrush current at 230 V, 50 Hz: 7.0 A
  Typical earth-leakage current: 0.43 mA
  Power Factor: 0.99 @ 100 V / 120 V , 0.97 @ 208 V / 230 V / 240 V
  Max current draw: 3.9 A @ 100 V / 120 V , 1.8 A @ 208 V / 230 V / 240 V
  Typical current draw: 2.9 A @ 100 V , 2.4 A @ 120 V , 1.4 A @ 208 V , 1.3 A @ 230 V , 1.2 A @ 240 V *
  Power Consumption
  Maximum: 340 W
  Typical: 292 W *
  Idle: 47 W *
  Hibernation: 32 W *
  * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  Typical: full output white, no effects moving, regulated fan speed.
  Idle: no output, no effects moving, regulated fan speed.
  Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

• Thermal Cooling: Forced air (temperature regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): -10° C (14° F) – Warm up condition may apply Maximum surface temperature, steady state, at 40° C ambient: 60° C (140° F) Total heat dissipation (calculated, +/- 10%): 972 BTU/hr.
  Acoustic Data Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 34.4 dB(A) Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 25.2 dB(A)
  Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Packaging: Recycled cardboard pulp inner packaging Efficacy (max output): 21.3 lm/W LWR*: 670 lm/kg (304 lm/lbs.)

  LWR = Lumen-to-Weight Ratio

  Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015; EN 55032; EN 55035; EN 61547; EN 61000-3-3 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class B, ICES-005 Class B Australia/NZ: RCM United Kingdom: UKCA Thailand: TIS
  Included Items

  Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
  SoftLens
  Multi-Language Safety and Installation Manual

  Related Items Martin Companion Cable (for firmware update over DMX): P/N 91616091 Martin Companion Software (for firmware update over DMX/Ethernet): Free download from www.martin.com
  Accessories

  Transport and Storage
  Flightcase for 6 x MAC Aura XIP: P/N MAR-91515057
  Additional dual SiP Foam Flightcase Insert for MAC Aura XIP: P/N MAR-91611861HU

  Consumables
  CR123A 3-volt lithium battery: P/N 05801011

  Spare Parts
  Additional MAC Aura XIP SoftLens: P/N 5136656-00

  Power Input Cables
  Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
  Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173

  Power Linking Cables
  Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
  Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

  Power Connectors
  Cable Connector, Neutrik powerCON TRUE1 TOP Female: P/N 91611789HU
  Cable Connector, Neutrik PowerCON TRUE1 TOP Male: P/N 91611788HU

  Installation Hardware
  G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
  Half-coupler Clamp: P/N 91602005
  Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

  Verified Third-Party Accessories

  Beam Control
  MAC Aura XIP Top Hat: P/N City Theatrical 2798
  MAC Aura XIP Hexcel Louver: P/N City Theatrical 2797
  MAC Aura XIP Concentric Ring: P/N City Theatrical 2796

  Ordering Information MAC Aura XIP in dual SiP (in cardboard box with dual SiP foam flight case insert): P/N MAR-90250105HU (to be ordered in multiples of 2) MAC Aura XIP in Cardboard (in cardboard box with cardboard inlay): P/N MAR-90250100HU MAC Aura XIP white in Cardboard (in cardboard box with cardboard inlay): P/N MAR-90250110HU

• 
  2023년 03월 14일
  Dick Clark’s New Year’s Rockin’ Eve Rings in 2023 With Help from Martin Lighting Solutions
• 
  2022년 09월 22일
  Martin by HARMAN Introduces MAC Aura XIP Indoor/Outdoor Premium Wash Light with Filament Effect

Martin MAC Aura XIP: Uncompromising Lighting Performance + Smart Weatherproof Versatility

Defying the Elements: Inside Martin’s Trailblazing XIP Weatherproof Lighting Technology

Tech Talks: How Martin Engineered Its Newest Wash Lights to be Brighter, Tighter and Incredibly Vivid

• MAC Aura XIP 등록
• 기술 지원 문의
• 상시 지원 센터