Martin Martin DMX 5.3 Splitter

Większe obrazy

The Martin DMX 5.3 Splitter is the most economical protection for DMX controllers and devices. The main purpose of the Martin 5.3 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read from DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin DMX 5.3 Splitter will help to rectify the signal.

3-pin XLR Input and Outputs DMX Splitter / Booster
Opto-isolated DMX Output ports
Rack, truss and wall mountable

Funkcje

DMX Splitter / Booster
Opto-isolated DMX Output ports
DMX loop through port with built-in termination
3-pin XLR Input and Outputs
Optimized for Martin fixture firmware upload
Universal power supply
Rack, truss and wall mountable
Lightweight yet robust construction

Specyfikacje

Physical Width: 220 mm (8.7 in.) Height: 45 mm (1.8 in.) Depth: 125 mm (5.0 in.) Weight: 0.9 kg (2.0 lbs.)

Data signal DMX: ANSI E1.11 (USITT DMX 512-A) Electrical standard: EIA-485 Recommended cable type: STP (Shielded Twisted Pair) Recommended cable gauge: 22 or 24 AWG

Construction Housing: Aluminum Finish: Electrostatic powder-coated

Connections Data input: 3-pin XLR male Data throughput (not amplified or branched): 3-pin XLR female Data outputs (optically isolated and amplified): 5 x 3-pin XLR female AC power input: 1.2 m cable tail with US-type (NEMA-5-15) power plug

Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Typical power consumption: 4 W Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Thermal Maximum ambient temperature (Ta max.): 55° C Minimum ambient temperature (Ta min.): -30° C

Approvals EU safety: EN 60950-1 EU EMC: EN 55022, EN 55024, EN 55103-1, EN 55103-2 US safety: UL 508 US EMC: FCC Part 15 Class A Canadian safety: CAN/CSA C22.2 No. 14 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241

Included Items
4 x screws to join two devices for rack mounting
2 x L-brackets + 8 x screws for 19-inch rack mounting two Splitters (1U) or surface mounting
1.2 m (3.9 ft.) hard-wired power cable with US-type (NEMA-5-15) plug

Related Items Martin™ RDM 5.5 Splitter: P/N 90758150

Accessories Installation hardware:
Half-coupler clamp: P/N 91602005
G-clamp:P/N 91602003
Quick-trigger clamp: P/N 91602007
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information Martin DMX 5.3 Splitter™: P/N 90758140

Pobrania

Specifications

	Język	Rozmiar	Przesłano
Martin DMX 5.3 Splitter Spec Sheet-English zaktualizowano: paź 2020		241 KB	paź 2020

Manuals

	Wersja	Język	Rozmiar	Przesłano
Martin DMX 5.3 Splitter - User manual wersja A, zaktualizowano: maj 2018	A		1,1 MB	maj 2018

Compliances

	Wersja	Język	Rozmiar	Przesłano
Martin DMX 5.3 Splitter, Martin RDM 5.5 Splitter- EU Declaration of Conformity wersja A, zaktualizowano: maj 2018	A		340 KB	maj 2018
Martin DMX 5.3 Splitter- ETL Listing Verification wersja A, zaktualizowano: maj 2018	A		100 KB	maj 2018