Companion Desktop is the fixture management, firmware upload and stand-alone programming tool compatible with all Martin fixtures for maximal ease of use. The Companion Desktop application synchronizes with Martin’s library over the Internet, so gone are the days of browsing the support pages to find the latest fixture firmware or spare parts overview.
Advanced RDM integration allows all fixtures to be configured and patched remotely. To facilitate easy configuration of many fixtures in one go, a Fixture Configuration system allows an entire set of fixture settings to be pushed to all selected fixtures at once. The built-in Quick Addressing tool enables fixture addressing with just a single click per fixture.
The built-in ergonomic stand-alone programming tool allows fixtures to be programmed with up to 20 scenes with individual hold and fade times. The fixtures can then run these fully synchronized, without any computer or controller connected. Stand-alone shows can also be stored, shared and re-used later.
Companion Desktop also automatically synchronizes with the Martin-made GDTF files on the GDTF share. Giving you access to all fixture details such as DMX Modes, DMX Channel Listings, Gobo Loadouts and more. GDTF files can be exported directly from Companion Desktop for use with any GDTF-compatible software.
The built-in spare parts finder gives you access to a 3D model of each Martin fixture, which can be taken apart to identify spare parts.
Also check out Companion Mobile, which offers some of the same features for mobile iOS and Android devices.
兼容所有Martin灯具
Martin Companion可为所有Martin产品系列（包括MAC、ERA、ELP、VDO和Exterior）上传固件。
通过 DMX 或网络连接灯具
Martin Companion 与灯具之间可通过 Martin Companion Cable 或标准网络接口进行连接。
自动云同步
通过在线同步，您可随时获取最新的灯具固件、备件查询工具和 GDTF 文件。无需再逐一访问支持页面查找最新固件、备件或 GDTF 文件，Martin Companion 会自动为您完成。
导出固件，通过 USB 或 P3 更新
除通过 Martin Companion 更新灯具外，也可从 Martin Companion 导出固件，再通过 USB 存储设备或 Martin P3 系统控制器更新灯具。
通过 RDM 或基于 Art-Net 的 RDM 进行配置与编址
集成的 RDM 工具包支持对灯具进行远程配置和编址。Martin Companion 支持标准 RDM 参数，同时还支持 Martin 专有的高级 RDM 参数，以便将灯具配置至最佳性能。
灯具设置模板，快速部署
数秒即可更新多台灯具的设置。任何设置组合都可以存储在模板中，然后推送到灯光系统中的所有灯具。告别逐台手动检查灯具设置的繁琐。
独立编程
使用 Martin Companion 可将多达 20 个场景的演出节目编程到特定 Martin 灯具中，每个场景均具有独立的保持时间和渐变时间。灯具将在完全同步状态下运行该节目，无需连接计算机或控制器。
GDTF 查看与导出
可查看 Martin 出品的全部 GDTF 文件，查询灯具详细信息，并可直接在 Martin Companion 中下载，随时调用，便捷高效。
备件查找器
打开任意 Martin 灯具的 3D 模型，即可查找所需备件。
版本 2.0.0,
更新: 12月 2023
顾问支持