Martin P3 PowerPort 500 IP Install

较大的图像

Martin P3 PowerPort 500 IP Install为Martin的创意LED灯具提供无缝的电源和数据传输，是室内/室外安装应用的理想选择。它将稳定的电源配送与高速、大容量数据分配相结合，简化了灯具部署。该产品外壳设计用于在最恶劣的环境中安装。

为确保设计师和集成商获得最大灵活性，它可采用行业标准协议（包括Art-Net、sACN以及Martin获奖的P3控制协议）驱动。无需本地配置或设置，可轻松部署，电源可位于距照明灯具显著距离处。它支持更长的电缆、更多的菊花链灯具和分支连接。内置网络交换机无需第三方交换机，电源限制控制可增加菊花链中的灯具数量，同时实施节能措施。

P3 PowerPort 500 IP Install是强大可靠的解决方案，可保护所有输入和输出免受过载和浪涌的影响，内置故障安全旁路技术可防止单个设备故障中断整个网络。此外，它是通过单根电缆向灯具提供数据和电源的单一设备。它配备本地状态指示LED和测试按钮，无需操作人员位于控制器或计算机附近。

所有支持P3 PowerPort的创意LED灯具都可与P3 PowerPort 500 IP Install配对，即使在同一菊花链上也可。

**主要改进：** - 第一段："电源输送"改为"电源配送"（更规范的技术术语）；"一个"删去（中文不需要） - 第二段：精简开头"为了确保"为"为确保"；"包括Art-Net和sACN"改为"包括Art-Net、sACN"（用顿号分列）；删去"它无需"的重复主语，改为"无需"；"消除了对...的需求"改为"无需...""（更简洁）；删去冗余的"一个" - 第三段：删去"一个"；删除重复的"此外"（原文出现两次"In addition"和"Furthermore"，但中文重复显得冗赘）；精简结构 - 第四段：删去多余的"可以"

特点

用于 Martin Creative LED 灯具安装的室内/室外电源+数据供电单元
适用于安装应用
配备 1 个电源+数据输出接口，用于连接灯具
内置网络交换机，便于菊花链连接
状态 LED 指示灯提供实时反馈
本地测试按钮便于诊断
内置电源控制功能，在无需全功率输出时可支持更多灯具菊花链连接
内置休眠模式，系统不使用时实现节能
兼容 Art-Net、sACN 和 Martin P3
配备内部接线端子，便于现场定制电缆长度
可壁挂安装
IP66 等级

**Key changes:** 1. Line 1: Restructured to natural Chinese syntax — moved "Martin Creative LED 灯具" earlier for clarity 2. Line 2: Removed redundant "理想" (ideal); "适用于" alone is more professional and concise 3. Line 7: Reordered "灯具菊花链连接" for better readability — object+connector order is more natural than "菊花链灯具"

性能

物理特性
Width: 325.0 mm (12.8 in.)
Height: 84.0 mm (3.3 in.)
Depth: 385.0 mm (15.2 in.)
Weight: 9.5 kg (20.9 lbs.)

Control and Programming
Control Protocols: P3, sACN, Art-Net and RDM over Art-Net
Protocol Detection: Automatic
Settings and Feedback: P3 or RDM over Art-Net
Unit identification: User-settable ID number
Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
sACN Compliance: ANSI E1.31 - 2018
Martin P3 Compliance: P3 System Controller Software 6.1.0 or newer
Ethernet Transceiver IN: 100/1000Mbit (with fail-safe bypass to Ethernet THRU)
Ethernet Transceiver THRU: 100/1000Mbit (with fail-safe bypass to Ethernet IN)
Ethernet Transceiver OUT: 100Mbit
Firmware Update: via Ethernet using Martin Companion or P3 System Controller

Control/User Interface External
Power Out Status: 1x Green LED
Ethernet Out Status: 1x Amber LED
Ethernet In/Thru Status 1-2: 2x Green+Amber LED
Device Status: 1x RGB LED
Device test and reset: Pushbutton to call up test patterns on fixtures connected to DCE output and reset device

Control/User Interface Internal
Fixtures Power Mode: DIP switch to force all connected fixtures in normal power, force all connected fixtures in half power or let controller decide (via P3 or RDM)
External User Interface Disable: DIP switch to disable all (5) external Status LEDs and the external pushbutton

Construction
Color: Matte Black
Housing Material: Aluminium
Protection Rating: IP 66
NEMA Enclosure Rating: Type 3
Impact Resistance: IK 08
Corrosion Resistance: ISO 12944-6: 2018; C5 High, Test regime ISO 9227, 1440h
Vibration resistance: 1.0g Sinusoidal (IEC 60068-2-6) and 0.7g RMS Random (IEC 60068-2-64)

Installation
Orientation: Any
Mounting: Flanges for installation on flat surface
Location: indoor or permanent outdoor

Connections
Power In/Thru: Toolless terminal block
Cable Glands: 2x M20*1.5 (power in/thru, supporting cables 8-13 mm) incl. closing plug
Ethernet In/Thru: 2x Toolless splice connection
Cable Glands: 2x M12*1.5 (ethernet in/thru, supporting cables 5-8 mm) incl. closing plug
DC Power output: Toolless terminal block
Network output: Toolless splice connection
Cable Gland: 1x M20*1.5 (DC power and network output, supporting cables 6.5-10.5 mm) incl. closing plug
Surge protection: 4 KV

Output Ports
Quantity: 1
Power: 48 VDC / 10 A
Ethernet: 100Mbit (P3, sACN, Art-Net)
Electrical
AC power: 100-277 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 7.7 A
Typical earth-leakage current: 0.56 mA
Power Factor: 0.99 @ 100 V / 120 V / 208 V / 230 V / 240 V / 277 V
Max current draw: 5.5 A @ 100 V / 120 V , 3.0 A @ 208 V / 230 V / 240 V / 277 V
Typical current draw: 5.3 A @ 100 V / 120 V , 2.8 A @ 208 V / 230 V / 240 V / 277 V *
Power Consumption
Maximum: 500 W
Typical: 500 W *
Idle: 11 W *
Hibernation: 10 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: output at full capacity with all connected fixtures at full output white.
Idle: output at full capacity with all connected fixtures at zero output.
Hibernation: output disabled; wake-up procedure required to re-use fixtures.

Thermal
Cooling: Convection
Maximum Ambient Temperature (Ta max): 55° C (131° F)
Minimum Ambient Temperature (Ta min): -30° C (-22° F)
Maximum Surface Temperature, steady state, at 40° C ambient: 61° C (142° F)
Typical Heat Dissipation (calculated, +/- 10%): 164 BTU/hr.

Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard inlay and outer packaging

Approvals Global CB Certification/IECEE: IEC 62368-1 EU safety: EN 62368-1 EU EMC: EN 55032, EN55035, EN 61000-3-2, EN 61000-3-3 US safety: UL 62368-1 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 62368-1 Canadian EMC: ICES-003 Class B Australia/NZ: RCM United Kingdom: UKCA

Compatible Fixtures
VDO Sceptron XB
Exterior Dot-1 Pro (via Exterior DC-Feeder)
Exterior Dot-4 Pro (via Exterior DC-Feeder)
Exterior Dot-9 Pro (via Exterior DC-Feeder)
Exterior Dot-HP Pro

Included Items
1x Multi-Language Safety & Installation Manual
Closing plugs installed in all cable glands

Related Items
P3 PowerPort 2000: P/N MAR-90721200
P3 PowerPort 500 IP Rental: P/N MAR-90721201
DCE PSU 240 IP: P/N MAR-90721203
DCE DataSplitterBooster IP: P/N MAR-90721204

Martin Companion Firmware Upload, Addressing and Stand-Alone Programming Software: Free download from www.martin.com

P3-175 System Controller: P/N MAR-90721100
P3-275 System Controller: P/N MAR-90721101
P3-PC System Controller: Free download from www.martin.com

Accessories
Pre-Assembled Hybrid DCE Cables
DC + Ethernet Cable DCE-DCE 1m: P/N MAR-91700100
DC + Ethernet Cable DCE-DCE 2.5m: P/N MAR-91700101
DC + Ethernet Cable DCE-DCE 5m: P/N MAR-91700102
DC + Ethernet Cable DCE-DCE 10m: P/N MAR-91700103
DC + Ethernet Cable DCE-DCE 25m: P/N MAR-91700104

Bulk Hybrid DCE Cables
DC + Ethernet Cable 100m: P/N MAR-91700105
DC + Ethernet Cable LSZH 100m: P/N MAR-91700106

Field-Installable DCE Connectors
Field-installable Connector DCE Male: P/N MAR-91700107
Field-installable Connector DCE Female: P/N MAR-91700108

Closing Caps for DCE Connectors
Closing Cap Male DCE Connector: P/N MAR-91700109
Closing Cap Female DCE Connector: P/N MAR-91700110

Hybrid DCE Adapters
DC + Ethernet Adapter DCE Male-Male: P/N MAR-91700111
DC + Ethernet Adapter DCE Female-Female: P/N MAR-91700112
DC + Ethernet Adapter EtherCON+Wires to DCE: P/N MAR-91700113
DC + Ethernet Adapter DCE to EtherCON: P/N MAR-91700114
DC + Ethernet Adapter Bare Wires to DCE: P/N MAR-91700115

Ordering Information
P3 PowerPort 500 IP Install: P/N MAR-90721202

下载

Specifications

	版本	语言	大小	上传日期
P3 PowerPort 500 IP Install - Spec Sheet 版本 B, 更新: 11月 2025	B		1.3 MB	11月 2025
DCE Cables & Connectors - Drawings 版本 C, 更新: 5月 2026	C		1.9 MB	5月 2026
Field-installable DCE Connectors - Assembly Instructions 版本 A, 更新: 8月 2024	A		463.4 KB	8月 2024

Manuals

	版本	语言	大小	上传日期
P3 PowerPort Family - Installation, Safety and User Manual 版本 B, 更新: 8月 2024	B		1.8 MB	8月 2024
P3 PowerPort Family - Guide de Sécurité, d’Installation et d’Utilisation 版本 B, 更新: 8月 2024	B		2.0 MB	8月 2024
P3 PowerPort Family - Bedienungsanleitung mit Installations- und Sicherheitshinweisen 版本 B, 更新: 8月 2024	B		2.0 MB	8月 2024
P3 PowerPort Family - Manual de Usuario con Manual de Seguridad e Instalación 版本 B, 更新: 8月 2024	B		1.9 MB	8月 2024
P3 PowerPort Family - Capacity Information Note 版本 C, 更新: 5月 2026	C		250.2 KB	5月 2026

Illustrations

	版本	语言	大小	上传日期
P3 PowerPort 500 IP Install - 2D Dimensions 版本 A, 更新: 8月 2024	A		2.7 MB	8月 2024

Symbols

	版本	语言	大小	上传日期
Martin Professional GDTF Library 版本 A, 更新: 10月 2023	A		203 字节	10月 2023
AutoCAD 2D Symbols 版本 2.8, 更新: 1月 2026	2.8		4.4 MB	1月 2026
AutoCAD 3D Symbols 版本 2.8, 更新: 1月 2026	2.8		18.7 MB	1月 2026
Vectorworks Symbols 版本 4.6, 更新: 1月 2026	4.6		248.9 MB	1月 2026

CAD Drawings

	版本	语言	大小	上传日期
P3 PowerPort 500 IP Install - 3D Model 版本 A, 更新: 8月 2024	A		23.5 MB	8月 2024

BIM Objects

	版本	语言	大小	上传日期
P3 PowerPort 500 IP Install - BIM Object 版本 A, 更新: 5月 2025	A			5月 2025

Compliances

	版本	语言	大小	上传日期
P3 PowerPort 500 IP Install - ETL Authorization To Mark 版本 A, 更新: 2月 2025	A		183.4 KB	2月 2025
P3 PowerPort 500 IP Install - Product Verification and Reliability Report 版本 A, 更新: 9月 2025	A		426.6 KB	9月 2025
P3 PowerPort 500 IP Install - EU Test Verification of Conformity 版本 A, 更新: 10月 2024	A		504.6 KB	10月 2024
P3 PowerPort 500 IP Install - CB Test Certificate 版本 A, 更新: 10月 2024	A		130.4 KB	10月 2024
P3 PowerPort 500 IP Install - EU Declaration of Conformity 版本 A, 更新: 9月 2024	A		220.3 KB	9月 2024
P3 PowerPort 500 IP Install - UKCA Declaration of Conformity 版本 A, 更新: 9月 2024	A		151.3 KB	9月 2024
P3 PowerPort 500 IP Install - ETL Listing Verification 版本 A, 更新: 9月 2024	A		146.5 KB	9月 2024