ERA 400 Performance WRM
Eingestellt

300 W Profilscheinwerfer mit warmer LED-Lichtquelle, Framing und CMY-Farbmischung

Größere Bilder

Designed to fulfill the demand for a bright, compact, tour-worthy moving head, the Martin ERA 400 Performance WRM combines a feature-loaded and rugged, yet cost-efficient profile for entertainment and rental applications. It features a highly efficient 300W warm white LED engine that offers unparalleled 3,200K warm tungsten emulation with a high CRI ideally suited towards small to mid-size theatres and compliments perfectly the Martin ELP range. It produces a sharp image projection with a flat field, includes 1:3 zoom, electronic dimming and strobe, full CMY color mixing and separate color wheel, iris for beam adjustment and fixed and rotating gobo wheels, loaded with user-favorite gobos from the renowned Martin MAC range that include a wide variety of effects, especially when combined with the included rotating prism.

The ERA 400 Performance WRM includes a full curtain framing system which offers lighting designers a high degree of flexibility to achieve precise looks on stage. When fully focused, gobos can be nicely framed with a soft edge, and each of the four framing blades can cross the entire beam independently for a full blackout. The entire system can rotate 90 degrees, allowing designers to direct light exactly where they want it to go and achieve unique movement effects not otherwise possible.

Whether being used for small and mid-sized theaters, concert and touring, live TV productions, corporate shows, cruise lines, or houses of worship, the Martin ERA 400 Performance WRM is ideal for a long list of scenarios, requiring a truly versatile LED profile that offers near limitless design and usage potential.

 

Lighting For Live Streams

  • VOLLSTÄNDIGES FRAMING-SYSTEM
    Das Framing-System mit vollständiger Vorhangfunktion ermöglicht es jeder der vier Blenden, den gesamten Strahl unabhängig zu durchfahren und so eine vollständige Abdunkelung zu erreichen. Darüber hinaus lässt sich das gesamte Framing-Modul um 90 Grad drehen, was eine präzise und exakte Bildprojektion auf den gewünschten Bühnenbereich ermöglicht. Bei vollständiger Fokussierung können Gobos mit weicher Kante gerahmt werden, was Designern ein hohes Maß an Flexibilität im Lichtdesign bietet.

  • 300-WATT-LED-LICHTQUELLE

    Mit einer effizienten 300-Watt-Lichtquelle liefert die ERA 400 eine höhere Leistung als ähnlich große Leuchten. Die vollständig elektronische Dimmung ermöglicht extrem schnelle Stroboskopeffekte, sofortige Intensitätsregelung und ein gleichmäßiges, konsistentes Lichtfeld, das bis auf null Prozent beibehalten werden kann.

  • CMY-FARBMISCHUNG

    Bietet zarte Pastelltöne ebenso wie lebendige Farben sowie schnelle Übergänge und weiche Überblendungen. Das Farbrad ermöglicht schöne Farbaufteilungen und schnelle Farbwechsel und erweitert den gesamten Farbraum sowie die Helligkeit. Die native 3000K-Warmlicht-LED ermöglicht warme, natürliche Farben mit viel Intensität.

  • 1:3 ZOOMBEREICH

    Mit einem Zoombereich von 10 bis 30 Grad eignet sich die ERA 400 Performance hervorragend für unterschiedliche Montagehöhen, und der 30-Grad-Weitwinkel liefert einen ausreichend großen Abstrahlwinkel für eine optimale Ausleuchtung kleinerer Bühnen. Der Zoomvorgang erfolgt schnell und präzise und behält über den gesamten Bereich eine hohe Lichtleistung bei.

  • KOMPAKT UND FÜR DEN MOBILEN EINSATZ KONZIPIERT

    Das ERA 400 ist für seine Klasse sehr kompakt und leichtgewichtig, wodurch es einfach zu handhaben und zu montieren ist. Das modulare Design ermöglicht einen sicheren, schnellen und einfachen Zugriff auf Effekte sowie deren Austausch – Module können in weniger als einer Minute gewechselt werden.

featured content

VOLLSTÄNDIGES FRAMING-SYSTEM
Das Framing-System mit vollständiger Vorhangfunktion ermöglicht es jeder der vier Blenden, den gesamten Strahl unabhängig zu durchfahren und so eine vollständige Abdunkelung zu erreichen. Darüber hinaus lässt sich das gesamte Framing-Modul um 90 Grad drehen, was eine präzise und exakte Bildprojektion auf den gewünschten Bühnenbereich ermöglicht. Bei vollständiger Fokussierung können Gobos mit weicher Kante gerahmt werden, was Designern ein hohes Maß an Flexibilität im Lichtdesign bietet.

featured content

300-WATT-LED-LICHTQUELLE

Mit einer effizienten 300-Watt-Lichtquelle liefert die ERA 400 eine höhere Leistung als ähnlich große Leuchten. Die vollständig elektronische Dimmung ermöglicht extrem schnelle Stroboskopeffekte, sofortige Intensitätsregelung und ein gleichmäßiges, konsistentes Lichtfeld, das bis auf null Prozent beibehalten werden kann.

featured content

CMY-FARBMISCHUNG

Bietet zarte Pastelltöne ebenso wie lebendige Farben sowie schnelle Übergänge und weiche Überblendungen. Das Farbrad ermöglicht schöne Farbaufteilungen und schnelle Farbwechsel und erweitert den gesamten Farbraum sowie die Helligkeit. Die native 3000K-Warmlicht-LED ermöglicht warme, natürliche Farben mit viel Intensität.

featured content

1:3 ZOOMBEREICH

Mit einem Zoombereich von 10 bis 30 Grad eignet sich die ERA 400 Performance hervorragend für unterschiedliche Montagehöhen, und der 30-Grad-Weitwinkel liefert einen ausreichend großen Abstrahlwinkel für eine optimale Ausleuchtung kleinerer Bühnen. Der Zoomvorgang erfolgt schnell und präzise und behält über den gesamten Bereich eine hohe Lichtleistung bei.

featured content

KOMPAKT UND FÜR DEN MOBILEN EINSATZ KONZIPIERT

Das ERA 400 ist für seine Klasse sehr kompakt und leichtgewichtig, wodurch es einfach zu handhaben und zu montieren ist. Das modulare Design ermöglicht einen sicheren, schnellen und einfachen Zugriff auf Effekte sowie deren Austausch – Module können in weniger als einer Minute gewechselt werden.

Videos

 

 

Eigenschaften

  • Helle 300-Watt-/3.200-K-LED-Lichtquelle
  • 6.000 Lumen Lichtstrom
  • Sanfte elektronische Dimmung und schnelle Stroboskopeffekte
  • Scharfe Optik mit planem Lichtfeld
  • 1:3 Schnellzoom
  • CMY-Farbmischung – Lebendige Farbmischung mit überlegener Farbpalette, die dem MAC-Sortiment entspricht
  • Farbrad mit 9 Positionen – für erweiterte Farbwahl und Split-Color-Effekte
  • Full Curtain Framing-Blades mit +/– 45°-Rotation des gesamten Systems für flexible Formgebung
  • 7 rotierende/indexierbare Gobos – alle als Martin-Glasgobos in bewährter Qualität
  • 9 statische Gobos für beeindruckende Morphing-Effekte
  • Iris – schnelle und präzise Iris
  • 3-Flächen-Prisma – echte Strahlentrennung mit Rotations- und Indexsteuerung für dynamische Effekte
  • Kompaktes und leichtes Design

Spezifikationen

  • Physical Length: 379 mm (14.9 in.) Width: 237 mm (9.3 in.) Height: 632 mm (24.9 in) Weight: 22.5 kg (49.6lbs)
    Dynamic Effects Color mixing: CMY, independently variable 0-100% Color wheel: 9 color filters plus open Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake Static gobo wheel: 9 gobos plus open, wheel indexing, rotation and shake Iris: 0-100% Zoom: Motorized Framing: Rotatable framing module, +/- 45°, with 4 individually controllable full framing blades with variable angle and position. Prism: Rotating/indexing three-facet prism Electronic dimming: 0 - 100%, four dimming curve options Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout Pan: 540°, coarse & fine control and speed Tilt: 260°, coarse & fine control and speed Focus: Motorized
    Control and Programming Control options: DMX Setting and addressing: Control panel with backlit LCD display 16-bit control: Dimming, pan and tilt DMX channels: 30 DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485
    Optics Front lens diameter: 110 mm Zoom range: 10° - 30° Light source: 300W LED engine Minimum LED lifetime: 20000 hours (to >70% luminous output)* Binning: Tight color and flux binning *Manufacturer´s figure obtained under manufacturer´s test conditions
    Photometric Data Light engine luminous output: 15500 lumens Fixture luminous output: 6000 lumens CRI (Color Rendering Index) : >91 CCT: 3200 Kelvin LED refresh rate : 1200 Hz

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP 20
    Gobos Gobo diameter: 26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.) Maximum image diameter: 19.0 mm (0.75 in.) Gobo thickness, maximum: 1.1mm borosilicate glass
    Installation Mounting points: Two quarter-turn brackets for rigging Orientation: Any
  • Connections AC power input: Neutrik powerCON TRUE1 DMX data in/out: 3-pin & 5-pin locking XLR
    Electrical

    AC power: 100-240 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 6.0 A
    Power Factor: 0.99 @ 120 V , 0.97 @ 230 V 
    Typical current draw: 3.8 A @ 120 V , 2.0 A @ 230 V *
    Power Consumption
    Typical: 455 W *
    Idle: 44 W *
    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Typical: full output white, no effects moving, regulated fan speed.
    Idle: no output, no effects moving, regulated fan speed.

    Thermal Cooling: Forced air (temperature regulated, low noise) Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 0° C Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 1550 BTU/hr.
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 13.5 lm/W LWR*: 262 lm/kg (119 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2,-3; EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class B, ICES-005 Class B Australia/NZ: RCM
    Included Items 2 x Omega brackets for rigging clamp attachment
    Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): .
    Accessories Cables, 16 A, for connection to power in chains:

    Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
    Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
    Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
    Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174

    Cables, 16 A, for relaying power in chains:

    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611786
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

    Connectors:

    Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789
    Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788

    Installation hardware:

    G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
    Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
    Half-coupler Clamp: P/N 91602005
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

    Ordering Information Martin ERA 400 Performance WRM in cardboard box: P/N 9025121795 Flightcase, two unit for ERA 400: P/N 91511217

Downloads

Specifications
  Version Größe Hochgeladen
file type icon ERA 400 Flightcase
Version A, aktualisiert: Okt 2020
1,21 MB Okt 2020
file type icon ERA 400 Performance WRM - Spec Sheet
aktualisiert: Dez 2019
  908 KB Dez 2019
file type icon ERA 400 Performance WRM Acoustic Test Report
Version A, aktualisiert: Okt 2020
2,26 MB Okt 2020
Manuals
  Version Sprache Größe Hochgeladen
file type icon ERA 400 Performance - User Manual
en Version B, aktualisiert: Okt 2020
en  3,32 MB Okt 2020
file type icon ERA 400 Performance - User Manual
fr Version A, aktualisiert: Dez 2019
fr  2,19 MB Dez 2019
file type icon ERA 400 Performance - User Manual
es Version A, aktualisiert: Dez 2019
es  2,2 MB Dez 2019
file type icon ERA 400 Performance - User Manual
de Version A, aktualisiert: Dez 2019
de  2,24 MB Dez 2019
Photometrics
  Größe Hochgeladen
1,31 MB Nov 2019
1,31 MB Nov 2019
1,31 MB Nov 2019
3,65 MB Nov 2019
Symbols
  Version Sprache Größe Hochgeladen
file type icon Vectorworks Symbols
en Version 4.7, aktualisiert: Aug 2026
4.7  en  286 MB Aug 2026
file type icon AutoCAD 3D Symbols
en Version 2.9, aktualisiert: Aug 2026
2.9  en  24,6 MB Aug 2026
file type icon AutoCAD 2D Symbols
en Version 2.9, aktualisiert: Aug 2026
2.9  en  5,2 MB Aug 2026
file type icon Martin Professional GDTF Library
en Version A, aktualisiert: Okt 2023
en  203 Bytes Okt 2023
CAD Drawings
  Größe Hochgeladen
file type icon ERA 400 Performance 3D Drawing (PDF)
aktualisiert: Nov 2019
139 KB Nov 2019
file type icon ERA 400 Performance 2D Drawing (PDF)
aktualisiert: Nov 2019
292 KB Nov 2019
file type icon ERA 400 Performance 2D Drawing (DWG)
aktualisiert: Nov 2019
6,81 MB Nov 2019
file type icon ERA 400 Performance 3D Drawing (DWG)
aktualisiert: Nov 2019
9,26 MB Nov 2019
file type icon ERA 400 Performance 3D Drawing (3DS)
aktualisiert: Nov 2019
26 MB Nov 2019
BIM Objects
  Version Sprache Größe Hochgeladen
file type icon ERA 400 Performance WRM - BIM Object
en Version A, aktualisiert: Sep 2021
en  Sep 2021
Compliances
  Sprache Größe Hochgeladen
  290 KB Nov 2019
  144 KB Nov 2019
fr  593 KB Nov 2019
en  591 KB Nov 2019
Firmware
  Version Größe Hochgeladen
download icon for ERA 400 Performance - Firmware ERA 400 Performance - Firmware
Version 2.0.0, aktualisiert: Aug 2026
2.0.0   Aug 2026

Falls einer der obigen Links zu seltsamen Zeichen in Ihrem Browser führt, klicken Sie bitte mit der rechten Maustaste auf die Datei, um sie auf Ihrem Computer zu speichern.

HARMAN Pro Insights

Lighting Design 101: How Martin Supports Every Lighting Need feature

Lighting Design 101: How Martin Supports Every Lighting Need

Martin has a wide range of products for various applications, from industry-standard moving lights to architectural lights. In the design phase, it’s important for lighting designers to understand how these lighting fixtures work in order to give audiences a great experience. This article will explore

CONTINUE READING

Support/FAQs

HARMAN Professional Solutions:

ERA 400 Performance WRM
Eingestellt

300 W Profilscheinwerfer mit warmer LED-Lichtquelle, Framing und CMY-Farbmischung