• Physical Weight: 39.0 kg (86.0 lbs.) Minimum center-to-center distance in side-by-side installation: 810 mm (31.9 in.) Length (head): 642 mm (25.3 in.) Length (base): 468 mm (15.5 in.) Width (base): 312 mm (12.3 in.) Width (across yoke): 520 mm (20.5 in.) Height (head straight up): 848 mm (33.4 in.) Height (maximum): 867 mm (34.2 in.)
  Dynamic Effects Pre-programmed effects: Two ranges of FX, independent or synchronized/combined Color mixing: CMY, independently variable 0 - 100% Color wheel: 6 x interchangeable dichroic filters + open (incl. Spectral Enhancement Filter), indexing, continuous rotation, random color Iris: Variable 0 - 100%, pulse effects Zoom: Motorized Color temperature control: Variable 5800 - 2850 K Frost: Motorized Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout Dimming options: Choice of four dimming curves Pan: 540°, coarse & fine control and speed Tilt: 268°, coarse & fine control and speed P3: Videomapping of fixture color and/or intensity with variable crossfade between DMX control and video control Focus: Motorized, range varies with zoom angle, from approx. 4.5 m (14.8 ft.) to infinity
  Control and Programming Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and P3 Protocol detection: Automatic Setting and addressing: Display Menu, RDM, RDM over Art-Net or P3 DMX Modes: One DMX channels: 29 16-bit Controllable Parameters: Dimming, Color Mixing + CTC, Zoom, Focus, Pan and Tilt Fixture Identification: User-settable ID number DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net sACN Compliance: ANSI E1.31 - 2016 Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer DMX/RDM Transceiver: Galvanic-isolated RS-485 Ethernet Transceiver: 10/100Mbit (with fail-safe bypass) Firmware update: USB memory device, via DMX using Martin Companion or via Ethernet using P3 System Controller Local User Interface: Backlit LCD Display with battery-powered operation
  Optics Front lens diameter: 220 mm Light source: 84 x 20 W White LEDs in a custom Martin engine Zoom Range Beam (half-peak): 6.8° - 47.5° (1:7) Zoom Range Field (tenth-peak): 9° - 62° (1:7) Maximum Total LED Engine Power: 1150 W Minimum LED Lifetime: >50,000 hours (to >80% luminous output)* / >20,000 hours (to >90% luminous output)*
  *Figure obtained under manufacturer's test conditions
  Photometric Data

  Light engine luminous output: 90,000 lumens LED refresh rate : 3000 Hz Standard Fixture luminous output: 63,500 lumens CRI (Color Rendering Index): 66 (+/- 3)TM-30 Rf (IES TM-30-15 Fidelity Index): 66 TM-30 Rg (IES TM-30-15 Gamut Index): 95 CCT: 5800 K (+/- 250 K) Peak Luminous Intensity: 5,000,000 cd With Spectral Enhancement Filter at 5300 K Fixture luminous output: 49,000 lumensCRI (Color Rendering Index): 78 (+/- 3)With CTO and Cyan at 3200 KFixture luminous output: 19,500 lumensCRI (Color Rendering Index): 90 (+/- 3)
  * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

  Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20
  Installation Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets Location: Dry location only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m (8 in.) Minimum distance to illuminated surfaces: 4.75 m (15.6 ft.)
  Connections DMX and RDM data in/out: 5-pin locking XLR AC mains power input.: Neutrik TRUE1 socket, accepts TRUE1 NAC3FX-W (TOP) connector Ethernet (Art-Net, sACN and P3) in/out, including fail-safe bypass: Neutrik etherCON Firmware from flash memory: USB 2.0 port
  Electrical

  AC power: 200-240 V AC nominal, 50/60 Hz
  Power supply unit: Auto-ranging electronic switch mode
  Typical half-cycle RMS inrush current at 230 V, 50 Hz: 17.0 A
  Power Factor: 0.99 @ 208 V / 230 V / 240 V
  Max current draw: 8.0 A @ 208 V , 6.7 A @ 230 V / 240 V
  Typical current draw: 6.6 A @  208 V , 6.0 A @ 230 V , 5.7 A @ 240 V *
  Power Consumption
  Maximum: 1450 W
  Typical: 1360 W *
  Idle: 100 W *
  Hibernation: 55 W *
  * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  Typical: full output white, no effects moving, regulated fan speed.
  Idle: no output, no effects moving, regulated fan speed.
  Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

• Thermal Cooling: Forced air (temperature regulated, low noise) Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 5° C Maximum surface temperature, steady state, at 40° C ambient: 85° C (185° F) Total heat dissipation (calculated, +/- 10%): 4950 BTU/hr.
  Acoustic Data Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 37.6 dB(A) Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 34.5 db(A)
  Warranty Fixture: 2 years Light Engine: 5 years
  Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 48 lm/w LWR*: 1,628 lm/kg (738 lm/lb)

  LWR = Lumen-to-Weight Ratio

  Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015; EN 55032; EN 61547; EN 55035; EN 61000-3-2,-11 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class B, ICES-005 Class B Australia/NZ: RCM
  Included Items Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
  Safety and Installation Manual
  Related Items Martin Companion Cable (for firmware update over DMX): P/N 91616091 Martin Companion Software (for firmware update over DMX): Free download from www.martin.com
  Accessories

  Transport and Storage
  Flightcase for 2 x MAC Ultra Performance/Wash without SIP inserts: P/N 91515055

  Consumables
  Air filter, MAC Quantum / MAC Ultra, set of 12: P/N 50400765
  CR123A 3-volt lithium battery: P/N 05801011

  Power Input Cables
  Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
  Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91611786
  Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173
  Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91610174

  Power Input Connector
  Cable Connector, Neutrik powerCON TRUE1 NAC3FX-W TOP (female): P/N 91611789HU

  Installation Hardware
  G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
  Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
  Half-coupler Clamp: P/N 91602005
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

  Verified Third-Party Accessories

  Beam Control
  MAC Ultra Wash Top Hat: P/N City Theatrical 2805
  

  Ordering Information MAC Ultra Wash, SIP (in cardboard box with SIP foam flight case insert): P/N 90250085HU MAC Ultra Wash, white finish, SIP (in cardboard box with SIP foam flight case insert): P/N 90250090HU

Tech Talks: How Martin MAC Ultra Pushes Lighting Innovation to the Razor Edge

• Registrieren Sie Ihr MAC Ultra Wash
• Technischen Support kontaktieren
• Hilfecenter rund um die Uhr