Downloads

Service Notes

• 0-10 V ADDA Interface (revA-EN)
• 10 AT fuses in MAC 700 at 208-240 V power (revA-EN)
• 10 Amp Fuses on MAC 550 and 700 at 208 - 240 V (revA-EN)
• 1000 Hour Lamp (revA-EN)
• 1000 Hours From OSRAM HTI 400 (revA-EN)
• 2 x 512 Channel DMX Interface (revA-EN)
• 250 W Lamp Approved (revA-EN)
• 255 Top Start Channel (revA-EN)
• 3000 Hours from Philips MSD 250/2 (revA-EN)
• 3000 Hours from Philips MSD 250/2 (revA-EN)
• 32 MB RAM (revA-EN)
• 3D Partsfinder - Opening using Solid Works Composer Player (rev3)
• 3D Partsfinder - Opening using Solid Works Composer Player (rev4)
• 3DPartsfinder using Solid Works Composer player (revA-EN)
• 4 AT Main Fuse in Stagebar 54 (revA-EN)
• 512 Channels from DJ and USB Interfaces (revA-EN)
• 5500-4200K Color Tempterature Correction kit (revA-EN)
• Adjust Dimmer After Installing 1.1 (revA-EN)
• Aluminum Gobos (revA-EN)
• Animation Wheel Adapter Included (revA-EN)
• Assembly instruction for PD hybrid connectors (revA-EN)
• Assembly instruction for PD hybrid connectors (revA-EN)
• Ballast Wire Colors Reversed in User Manual (revA-EN)
• Ballast Wiring Error in User Manual (revA-EN)
• Barn Door Socket Reversed (revA-EN)
• Barndoor kit installation note (revA-EN)
• Barndoor kit installation note (revB-EN)
• Barndoor/Snoot Kit (revA-EN)
• Barndoors Adjustment (revA-EN)
• Bluetooth Keyboard Support (revA-EN)
• Boot mode upload and normal DIP switch settings (revA-EN)
• Burning ISO files for Martin Controllers (revB-EN)
• CD-ROM Upgrade (revA-EN)
• CD-ROM Upgrade (revB-EN)
• CPFC Capacitor Replacement Recommendation (revB-EN)
• CX 4- PFC Capacitor Replacement (revB-EN)
• Cable Termination End Cap Installation Guide (revA-EN)
• Cable extension kit instruction note (revA-EN)
• Cable extension kit instruction note (revB-EN)
• Cable extension kit instruction note (revC-EN)
• Check Fan Connections in Single Base (revA-EN)
• Check Head Fan Connections (revA-EN)
• Compatibility Issues Software Uploader (revA-EN)
• Condenser Lens Kit Installation (revA-EN)
• Correct position of rotating gobos (revA-EN)
• Cyclo diffuser kit installation (revA-EN)
• DMX Cable Connection Changed (revA-EN)
• DMX Interface part number (revA-EN)
• DMX Reset Bug (revA-EN)
• DMX cables now optional accessories (revA-EN)
• Dead DMX and dead keyboard (revA-EN)
• Diffusion filter holder (revA-EN)
• EC Series Creative Accessories installation guide (revA-EN)
• EC Series Curving Kit installation guide (revE-EN)
• EC Series Headers installation guide (revE-EN)
• EC Series LED Block installation guide (revD-EN)
• EC-20 Curving Kit installation guide (revC-EN)
• EC-20 Headers installation guide (revC-EN)
• ETL Approved (revA-EN)
• EW series Incorrect warning print
• Easy to Install Vent Upgrade (revA-EN)
• Effect Cooling Fan Filter PCB Reduces Noise (revA-EN)
• Effect Fluids Cross References (revA-EN)
• Effect Fluids Cross References (revB-EN)
• Epoxy Sealant Kit (Do not apply to fixtures with preinstalled cables) (revA-EN)
• Error on Connection Label (revA-EN)
• Error on PCB Connection Label (revA-EN)
• Exterior 200- PFC Capacitor Replacement (revA-EN)
• Exterior 400 IP Warm-Up Mode (revA-EN)
• Exterior PixLine 40 - Tech note - Incorrect labeling (revA-EN)
• Exterior products - Performing a vacuum test - Tech note (revA-EN)
• Exterior products - Performing a vacuum test - Tech note (revD-EN)
• Exterior products - Performing a vacuum test - Tech note (revE-EN)
• Exterior products - Performing a vacuum test - Tech note (revF-EN)
• Exterior products - Performing a vacuum test - Tech note (revG-EN)
• Exterior products - Performing a vacuum test - Tech note (revH-EN)
• Fiber Adaptor Kit (revA-EN)
• Fiber Adaptor Kit (revB-EN)
• Fiber Adaptor Kit (revB-EN)
• FiberSource CMY150- PFC Capacitor Replacement (revA-EN)
• FiberSource QFX150- PFC Capacitor Replacement (revB-EN)
• Firmware Installation Instructions (revA-EN)
• Firmware Update Procedure (revA-EN)
• Fix for Parallel Port Bug (revA-EN)
• Flush Mount Bracket (revA-EN)
• Focus Spindle Lubrication (revA-EN)
• Front Glass Breaking (revA-EN)
• Frost filter installation note (revA-EN)
• Fuse Change (revA-EN)
• German Language Help (revA-EN)
• Glare Control Kit installation note (revA-EN)
• Glare Control Kit installation note (revB-EN)
• Gobo Replacement Made Easier (revA-EN)
• Guide d´installation MAC 250 Beam Kit (revC-FR)
• How to upload preprogrammed show to the 2510 Controller (revA-EN)
• Imager moving-mirror installation note (revA-EN)
• Important Safety Notice: Mounting Bracket Clamp Plate (revA-EN)
• Important instructions for uploading software
• Important safety check at next MAC 2000 service (revA-EN)
• Improved Corrosion Resistance for Fiberport (revA-EN)
• Incorrect Label on VDO Sceptron 10 (revA-EN)
• Installation guide for LED Replacement Kit (revA-EN)
• Installation note (revA-EN)
• Installation note (revB-EN)
• Installation note and information leaflet (revA-EN)
• Installing MAC 101 Series diffuser filters (revA-EN)
• Internal Dimmer (80 V and Multi-Voltage) Installation Note (revA-EN)
• J-Box installation note (revA-EN)
• Kit di staffe di montaggio (revA-IT)
• LC 2140 panels have 5 A main fuses, not 10 A (revA-EN)
• LED Function Changed (revB-EN)
• LJ 2.100 Installation Guide (rev2.100-EN)
• Lamp Explosion Detection Improved (revA-EN)
• Lamp Explosion Detection Improved (revA-EN)
• Lamp Included (revA-EN)
• Lamp Included (revA-EN)
• Lamp Strike Difficulties Can Be Due to Disconnected Fan (revA-EN)
• Lampholder Replacement (revA-EN)
• Lens Array Installation Guide (revA-EN)
• Lens installation note (revA-EN)
• Light Spill Limiter Kit Installation Note (revA-EN)
• Link Upgrade (revB-EN)
• Logo Projector Quick start (revB-EN)
• Longer Lamp Life (revA-EN)
• Longer Lifetime on MAC 2000 Pan/Tilt Motors (revA-EN)
• Longer Lifetime on MAC 2000 Pan/Tilt Motors (revA-EN)
• M-Sync Driver (revA-EN)
• M6 Screen Mount Kit and Accessory Mounts (revA-EN)
• M6 power cycle reliability improvement (revA-EN)
• MAC 101 / Aura / Aura XB - Mounting Bracket Installation (revB-EN)
• MAC 2000 Head Fan Connections (revB-EN)
• MAC 2000 Wash XB Beam Kit Installation Guide (revB-EN)
• MAC 250 Beam Kit Installation Guide (revA-EN)
• MAC 250 Beam Kit Installation Guide (revC-EN)
• MAC 250 Beam Kit Installation Guide (revE-EN)
• MAC 250 Beam Kit Installation Guide (revF-EN)
• MAC 250 Beam Kit Installation Guide (revG-EN)
• MAC 250 Krypton, MAC 250 Entour, MAC 250 Wash- PFC Capacitor Replacement (revB-EN)
• MAC 300, MAC 250, MAC 250+- PFC Capacitor Replacement (revB-EN)
• MAC 301 Software Upload Procedure (revA-EN)
• MAC 500, MAC 300, MAC 250, MAC 600, MAC 250 Krypton, MAC 250 Entour, MAC 250 Wash, MAC 250+- PFC Capacitor Replacement (revB-EN)
• MAC 550 Profile lamp replacement warning still displayed after 750 hours (revA-EN)
• MAC Aura / Aura XB Soft Lens Installation (revA-EN)
• MAC III Quadray Module installation guide (revA-EN)
• MAC III Quadray Module installation guide (revB-EN)
• MAC III Series lamps (revA-EN)
• MAC Quantum Profile – Residue on the front lens (revA-EN)
• MAC Viper Beam Kit Installation Guide (revB-EN)
• MAC Viper Profile - Live heat sink in base (revA-EN)
• MAC Viper Profile - Live heat sink in base (revA-EN)
• MAC Viper Series - Air Filter Options (revA-EN)
• MAC Viper Series - Correct lamp socket is PGJX36 (revA-EN)
• MAC Viper Series - Correct lamp socket is PGJX36 (revA-EN)
• MAC Viper Series - Lamp orientation from mid-2013 (revA-EN)
• MACIII Framing Kit - Installation note (hi-res) (revA-EN)
• MACIII Framing Kit - Installation note (lo-res) (revA-EN)
• MACIII Profile - Data port 2 disabled in software v.1.1.0 (revA-EN)
• MACIII Profile - Pan/tilt limits via DMX (Error in user manual) (revA-EN)
• MACIII Profile - Pan/tilt limits via DMX (Error in user manual) (revA-EN)
• MACIII Profile - RDM port change in software (revA-EN)
• MACIII Profile - Software bug affects cooling system (revA-EN)
• MACIII Profile/Performance - Gobo guidelines (revA-EN)
• MACIII Profile/Performance - Gobo guidelines (revA-EN)
• MACIII Profile/Performance - New revision of the controller PCB (revA-EN)
• MACIII Profile/Performance - New revision of the controller PCB (revA-EN)
• MACIII Profile/Performance - P/T driver PCB label available (revA-EN)
• MACIII Profile/Performance - P/T driver PCB label available (revA-EN)
• MACIII Profile/Performance – Focus lens cracking (revA-EN)
• MACIII Projection Kit - Installation note (lo-res) (revA-EN)
• MACIII Projection kit - Installation note (hi-res) (revA-EN)
• MACIII Series - Release tilt lock when fixture is in flightcase! (revA-EN)
• MCC Installation Notes (rev1-EN)
• MIDI/SMPTE PCB Installation Guide (revB-EN)
• MSD 250/2 Lamp Included (revA-EN)
• MSD 250/2 Lamp Included (revA-EN)
• MSD 575 Lamp Included (revA-EN)
• MSR 575/2 Lamp Included (revA-EN)
• MSR 575/2 Lamp Included (revA-EN)
• MX 10 Extreme, CX 10 Extreme, CX 10- PFC Capacitor Replacement (revB-EN)
• MX/CX-10 bracket friction kit (revA-EN)
• Mac Viper Series - Head Air Filter Replacement (revB-EN)
• Mac550/575/700 series - Rear end overheating/melting (revA-EN)
• Mac550/575/700 series - Rear end overheating/melting (revA-EN)
• MacTW1 Accessory Holder Instruction Note (revA-EN)
• Main fuse blowing without specific reason (revA-EN)
• Main fuse is 17.5 A, P/N 05020045 (revA-EN)
• Main fuse is 17.5 A, P/N 05020045 (revA-EN)
• Mandatory firmware update Atomic 3000 LED (revA-EN)
• Mandatory firmware upgrade (revA-EN)
• Mania EFX700- PFC Capacitor Replacement (revA-EN)
• Manuel d'utilisation Télécommande Infrarouge (revA-FR)
• Marine Grade A4 Stainless Steel Fasteners (revA-EN)
• Martin Atmospheric Effect Fluid Matrix (revC-EN)
• Martin Case Pro I, Martin Case Pro II+, Martin Case Pro II, Martin Case Pro I+- DMX Interface (revB-EN)
• Martin Effect Fluid Guidelines (revB-EN)
• Martin M1 Encoder Upgrade Kit installation guide (revA-EN)
• Martin M1 Firmware Installation Instructions (rev3.52.718-EN)
• Martin M1 MIDI PCB Installation (revA-EN)
• Martin M2GO / M2PC Firmware Installation Instructions (rev3.52.718-EN)
• Martin M6 Firmware Installation Instructions (rev3.52.718-EN)
• Martin Metal Halide Lamp Included (revA-EN)
• Martin One-Key License request and installation procedure (revF-EN)
• Maxedia File Saving Procedures (revA-EN)
• Maxedia Media Formats (rev4.102-EN)
• Maxxyz Compact DMX Firmware update (rev2.06-EN)
• Maxxyz Compact OS 2.4.x installation (revD-EN)
• Maxxyz Wing installation note (revA-EN)
• Maxxyz showing "OFFLINE" (revA-EN)
• Measure Length of OSRAM 1200 Watt Lamps (revA-EN)
• Mounting Frame - Installation Guide (revB-EN)
• Mounting Profile Installation Guide (revA-EN)
• Multi-Coupler (revA-EN)
• Multi-unit coupler installation (revA-EN)
• Must read before SW upload (revA-EN)
• Narrow Angle Lens Included (revA-EN)
• Narrow Angle Lens Kit Installation (revA-EN)
• New Air Filter Design (revA-EN)
• New Flightcases (revA-EN)
• New Fuse in EU Version (revA-EN)
• New Gobo, Color Wheels, Focus Lens Mount (revA-EN)
• New Heat Filter (revA-EN)
• New IR Remote Receiver (revA-EN)
• New Lamp Adjustment Screws (revA-EN)
• New Mounting Bracket (revA-EN)
• New Serial Cable (revA-EN)
• New firmware for LC Panels with P3 Upgrade (revA-EN)
• Not Much New in the Performance II (revA-EN)
• Note d´installation pour filtre frost (revA-FR)
• Omega Bracket Mounting Holes Added (revA-EN)
• Optional Lens Installation (revB-EN)
• Optional Lens Installation (revD-EN)
• P3 Upgrade Kit Installation Note (revB-EN)
• P3 Upgrade Kit Installation Note (revC-EN)
• P3-100/200 warranty repair procedures (revA-EN)
• P3-100/200 warranty repair procedures (revA-EN)
• PCI Driver Conflicts with W2K SP3 and SP4 (revA-EN)
• PD Cable kit - Modification Instruction (revB-EN)
• PD Cable kit - Modification Instruction (revC-EN)
• Pan/Tilt Protection Circuit Implemented (revA-EN)
• Pan/Tilt Protection Circuit Implemented (revA-EN)
• Particle Size, Fluid Density and Refractive Index Values (revB-EN)
• Pentium III Celeron CPU Motherboard (revA-EN)
• Philips MSI 1200 W/S Lamp Approved (revA-EN)
• Philips MSI 1200 W/S Lamp Approved (revA-EN)
• Possible Loose Head Covers (revA-EN)
• Power Supply Fuse Changed (revA-EN)
• Power cable replacement for customers in Canada (revA-EN)
• Procedure for Calibrating Zoom (revA-EN)
• RS232 to RS485 Conversion (revB-EN)
• RUSH PAR 2 - Gel frame (revA-EN)
• Recalibrate Tilt After Installing Version 2.0.0 (revA-EN)
• Redesigned MAC TW1 internal/external dimmer switch (revA-EN)
• Redesigned MAC TW1 internal/external dimmer switch (revA-EN)
• Reflector Kit for MAC 250 Wash, MAC 250 Krypton (revA-EN)
• Remote DMX Control for Club Version (revA-EN)
• Retrofit Kit Installation Guide (revA-EN)
• RoboColor III, Wizard, Wizard Extreme, Mania EFX700, Exterior 200, FiberSource CMY150, RoboColor Pro 400- PFC Capacitor Replacement (revA-EN)
• RoboColor Pro 400- PFC Capacitor Replacement (revA-EN)
• RoboScan Pro 918- PFC Capacitor Replacement (revB-EN)
• Running P3 network in surge-sensitive environment (revA-EN)
• SMPTE Level Requirements
• SMPTE/MIDI Card (revB-EN)
• SmartMac Profile - Power connector installed incorrectly (revA-EN)
• Smartmedia Memory Card Issue (revA-EN)
• Snoot Barndoor Kit Installation (revC-EN)
• Software 3.1.0 bug “Error getting frames” (revA-EN)
• Software Bug P3 System Controller (revA-EN)
• Software Version Missing on Label (revA-EN)
• Software Version Missing on Label (revA-EN)
• Solution to MAXedia Compact “System can’t boot, insert system disk” (revB-EN)
• Spot Mounting Arm installation note (revA-EN)
• Spot Mounting Arm installation note (revB-EN)
• Support Bracket Kit for the Prism/Dimmer Module (revA-EN)
• Support Bracket Kit for the Prism/Dimmer Module (revA-EN)
• Surface Mounting Clip Installation Guide (revB-EN)
• Template Included (revA-EN)
• Thermocouple colour changes (revA-EN)
• Time lag fuses in all MAC 2000 Series fixtures (revA-EN)
• Top Cover Screw Caps Missing or Loose (revA-EN)
• Torque Specifications Changed (revA-EN)
• Touring Kit (revA-EN)
• Truss Clip Installation Guide (revA-EN)
• USB DMX configuration on M2GO-M2PC (revA-EN)
• USB Interface Initialization Software (revA-EN)
• USB type B connector for connection to PC (revA-EN)
• Update bug in 1.5.0 (revA-EN)
• Updating Legacy USB-DMX devices (only supported on Martin Companion 1.6.0 and older) (revA-EN)
• Upload/Download Package (revA-EN)
• Upload/Download Utility 2.1 (revA-EN)
• User manual, IR remote (revA-EN)
• Using EC-10 LED Video panels with P3-050/150/300 System Controller (revA-EN)
• Using EC-10 LED Video panels with P3-050/150/300 System Controller (revA-EN)
• Using EC-20 LED Video panels with P3-050/150/300 System Controller (revA-EN)
• Using EC-20 LED Video panels with P3-050/150/300 System Controller (revA-EN)
• Using P3 PowerPort 1500 with P3-05/150/300 System Controller (revA-EN)
• VC-Grid/Strip products with P3 Software 3.1.1 or newer (revA-EN)
• VC-Grid/Strip products with P3 Software 3.1.1 or newer (revA-EN)
• VDO Face 5 - Edge compensation - Tech note (revA-EN)
• VDO Face 5 - Flicker on P3 signal - Tech note (revA-EN)
• VDO Face 5 - How to check firmware version - Tech note (revA-EN)
• VDO Face 5 - RCCB trips when connected in daisy chains (revA-EN)
• Wide Angle Lens and New Fan (revA-EN)
• Wizard, Wizard Extreme- PFC Capacitor Replacement (revA-EN)
• Woodroffe Gobo Collection (revA-EN)
• XB Upgrade Kit Installation Note, hi-res (revB-EN)
• XB Upgrade Kit Installation Note, hi-res (revC-EN)
• XB Upgrade Kit Installation Note, hi-res (revD-EN)
• XB Upgrade Kit Installation Note, hi-res (revE-EN)
• XB Upgrade Kit Installation Note, lo-res (revB-EN)
• XB Upgrade Kit Installation Note, lo-res (revC-EN)
• XB Upgrade Kit Installation Note, lo-res (revD-EN)
• XB Upgrade Kit Installation Note, lo-res (revE-EN)
• Zoom Pulley Improvement (revA-EN)