ERA 400 Performance CLD

Perfil LED frío de 300W con marcos y mezcla de color CMY

ERA 400 Performance CLD
Imágenes más grandes

Diseñado para satisfacer la demanda de una cabeza móvil brillante, compacta y lista para giras, el Martin ERA 400 Performance CLD combina un perfil repleto de características y robusto, pero rentable, para aplicaciones de entretenimiento y alquiler. Cuenta con un motor LED blanco frío de 300W altamente eficiente que produce una proyección de gobo brillante y nítida de 6.500K con campo plano. Los beneficios clave adicionales incluyen zoom 1:3, atenuación electrónica y estroboscópica, mezcla de color CMY completa y rueda de color separada, iris para ajuste del haz y ruedas de gobos fijos y rotativos, cargadas con los gobos favoritos de los usuarios del renombrado rango Martin MAC que incluyen una amplia variedad de efectos, especialmente cuando se combinan con el prisma rotativo incluido.

El ERA 400 Performance CLD incluye un sistema completo de cortina de encuadre que ofrece a los diseñadores de iluminación un alto grado de flexibilidad para lograr looks precisos en el escenario. Cuando están completamente enfocados, los gobos pueden estar bien encuadrados con un borde suave, y cada una de las cuatro cuchillas de encuadre puede cruzar el haz completo independientemente para un apagón total. Todo el sistema puede rotar 90 grados, permitiendo a los diseñadores dirigir la luz exactamente donde la deseen y lograr efectos de movimiento únicos que de otro modo no serían posibles.

Ya sea utilizado para conciertos y giras de pequeño y mediano tamaño, producciones de TV en vivo, shows corporativos, líneas de cruceros o casas de culto, el Martin ERA 400 Performance CLD es ideal para una larga lista de escenarios, requiriendo un perfil LED verdaderamente versátil que ofrece potencial de diseño y uso prácticamente ilimitado.

 

Lighting For Live Streams

  • FULL FRAMING SYSTEM
    The full curtain framing system allows each of the four framing blades to cross the entire beam independently for full blackout. In addition, the entire framing module can rotate 90 degrees, allowing for precise and accurate image projection for the desired stage area. When fully focused, gobos can be framed with a soft edge, enabling designers a high degree of flexibility in the lighting design.

  • 300 WATT LED LIGHT SOURCE

    With an efficient 300 watt light source, the ERA 400 delivers more output than similar-sized fixtures. Fully electronic dimming ensures extremely fast strobing, instant intensity control, and a flat, consistent field that can be maintained down to zero percent.

  • CMY COLOR MIXING

    Offers subtle pastels to vibrant colors, as well fast transitions and smooth fades. The color wheel produces nice color splits, fast color bumps and extends overall color gamut and brightness. Also features a CTO filter to obtain a 3000K tungsten color temperature.

  • 1:3 ZOOM RANGE

    With 10 to 30 degrees of zoom, the ERA 400 Performance works great on various trim heights and the 30 degree wide angle delivers enough spread for great coverage on smaller stages. Zooming is fast and accurate and maintains a high output throughout the range.

  • COMPACT AND DESIGNED FOR THE ROAD

    The ERA 400 is very compact and low weight for its class, making it easy to handle and rig. The modular design makes accessing and replacing of effects safe, quick, and easy – modules can be swapped in less than a minute.

featured content

FULL FRAMING SYSTEM
The full curtain framing system allows each of the four framing blades to cross the entire beam independently for full blackout. In addition, the entire framing module can rotate 90 degrees, allowing for precise and accurate image projection for the desired stage area. When fully focused, gobos can be framed with a soft edge, enabling designers a high degree of flexibility in the lighting design.

featured content

300 WATT LED LIGHT SOURCE

With an efficient 300 watt light source, the ERA 400 delivers more output than similar-sized fixtures. Fully electronic dimming ensures extremely fast strobing, instant intensity control, and a flat, consistent field that can be maintained down to zero percent.

featured content

CMY COLOR MIXING

Offers subtle pastels to vibrant colors, as well fast transitions and smooth fades. The color wheel produces nice color splits, fast color bumps and extends overall color gamut and brightness. Also features a CTO filter to obtain a 3000K tungsten color temperature.

featured content

1:3 ZOOM RANGE

With 10 to 30 degrees of zoom, the ERA 400 Performance works great on various trim heights and the 30 degree wide angle delivers enough spread for great coverage on smaller stages. Zooming is fast and accurate and maintains a high output throughout the range.

featured content

COMPACT AND DESIGNED FOR THE ROAD

The ERA 400 is very compact and low weight for its class, making it easy to handle and rig. The modular design makes accessing and replacing of effects safe, quick, and easy – modules can be swapped in less than a minute.

Videos

 

 

Características

  • Bright 300 watt / 6,500K LED light source
  • 10,000 lumen output
  • Smooth electronic dimming and fast strobe effects
  • Crisp optics with flat field
  • 1:3 Fast zoom
  • CMY color mixing - Vibrant color mixing with a superior palette of colors matching the MAC range
  • 9-slot color wheel –for added color choice and split color effects
  • Full Curtain Framing blades with +/- 45° rotation of entire system for flexible shape generation
  • 7 rotating/indexing gobos – All renowned Martin glass gobos
  • 9 static gobos for great morphing effects
  • Iris – Fast and tight iris
  • 3-facet prism – Real beam separation with rotation and index control for dynamic effects 
  • Compact and low weight design

Especificaciones

  • Physical Length: 379 mm (14.9 in.) Ancho: 237 mm (9.3 in.) Altura: 632 mm (24.9 in) PESO: 22.5 kg (49.6lbs)
    Dynamic Effects Color mixing: CMY, independently variable 0-100% Color wheel: 9 color filters plus open Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake Static gobo wheel: 9 gobos plus open, wheel indexing, rotation and shake Iris: 0-100% Zoom: Motorized Framing: Rotatable framing module, +/- 45°, with 4 individually controllable full framing blades with variable angle and position. Prism: Rotating/indexing three-facet prism Electronic dimming: 0 - 100%, four dimming curve options Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout Pan: 540°, coarse & fine control and speed Tilt: 260°, coarse & fine control and speed Focus: Motorized
    Control and Programming Control options: DMX Setting and addressing: Control panel with backlit LCD display 16-bit control: Dimming, pan and tilt DMX channels: 30 DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485
    Optics Front lens diameter: 110 mm Zoom range: 10° - 30° Light source: 300W LED engine Minimum LED lifetime: 20000 hours (to >70% luminous output)* Binning: Tight color and flux binning *Manufacturer´s figure obtained under manufacturer´s test conditions
    Photometric Data Light engine luminous output: 26500 lumens Fixture luminous output: 10000 lumens CRI (Color Rendering Index) : >70 Color Temperature: 6,500 K LED refresh rate : 1200 Hz

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP 20
    Gobos Gobo diameter: 26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.) Maximum image diameter: 19.0 mm (0.75 in.) Gobo thickness, maximum: 1.1mm borosilicate glass
    Installation Mounting points: Two quarter-turn brackets for rigging Orientation: Any
  • Connections AC power input: Neutrik powerCON TRUE1 DMX data in/out: 3-pin & 5-pin locking XLR
    Electrical

    AC power: 100-240 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 6.0 A
    Power Factor: 0.99 @ 120 V , 0.97 @ 230 V
    Typical current draw: 3.8 A @ 120 V , 2.0 A @ 230 V *
    Power Consumption
    Typical: 455 W *
    Idle: 44 W *
    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Typical: full output white, no effects moving, regulated fan speed.
    Idle: no output, no effects moving, regulated fan speed.

    Thermal Cooling: Forced air (temperature regulated, low noise) Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 0° C Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 1550 BTU/hr.
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 23.4 lm/W LWR*: 444 lm/kg (202 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2,-3; EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class B, ICES-005 Class B Australia/NZ: RCM
    Included Items 2 x Omega brackets for rigging clamp attachment
    Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): .
    Accessories Cables, 16 A, for connection to power in chains:

    Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
    Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
    Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
    Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174

    Cables, 16 A, for relaying power in chains:

    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611786
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

    Connectors:

    Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789
    Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788

    Installation hardware:

    G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
    Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
    Half-coupler Clamp: P/N 91602005
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

    Ordering Information Flightcase, two unit for ERA 400: P/N 91511217 Martin ERA 400 Performance CLD in cardboard box: P/N 9025121796

Descargas

Specifications
  Versión Tamaño Subido
file type icon ERA 400 Performance CLD - Spec Sheet
actualizado: dic 2019
  900 KB dic 2019
file type icon ERA 400 Flightcase
versión A, actualizado: oct 2020
1,21 MB oct 2020
file type icon ERA 400 Performance CLD Acoustic Test Report
versión A, actualizado: oct 2020
2,31 MB oct 2020
Manuals
  Versión Idioma Tamaño Subido
file type icon ERA 400 Performance - User Manual
en versión B, actualizado: oct 2020
en  3,32 MB oct 2020
file type icon ERA 400 Performance - User Manual
fr versión A, actualizado: dic 2019
fr  2,19 MB dic 2019
file type icon ERA 400 Performance - User Manual
es versión A, actualizado: dic 2019
es  2,2 MB dic 2019
file type icon ERA 400 Performance - User Manual
de versión A, actualizado: dic 2019
de  2,24 MB dic 2019
Photometrics
  Tamaño Subido
1,31 MB nov 2019
1,31 MB nov 2019
1,31 MB nov 2019
3,66 MB nov 2019
Symbols
  Versión Idioma Tamaño Subido
file type icon AutoCAD 3D Symbols
en versión 2.8, actualizado: ene 2026
2.8  en  18,7 MB ene 2026
file type icon AutoCAD 2D Symbols
en versión 2.8, actualizado: ene 2026
2.8  en  4,42 MB ene 2026
file type icon Martin Professional GDTF Library
en versión A, actualizado: oct 2023
en  203 Bytes oct 2023
file type icon Vectorworks Symbols
en versión 4.6, actualizado: ene 2026
4.6  en  249 MB ene 2026
CAD Drawings
  Tamaño Subido
file type icon ERA 400 Performance 3D Drawing (PDF)
actualizado: nov 2019
139 KB nov 2019
file type icon ERA 400 Performance 2D Drawing (PDF)
actualizado: nov 2019
292 KB nov 2019
file type icon ERA 400 Performance 2D Drawing (DWG)
actualizado: nov 2019
6,81 MB nov 2019
file type icon ERA 400 Performance 3D Drawing (DWG)
actualizado: nov 2019
9,26 MB nov 2019
file type icon ERA 400 Performance 3D Drawing (3DS)
actualizado: nov 2019
26 MB nov 2019
BIM Objects
  Versión Idioma Tamaño Subido
file type icon ERA 400 Performance CLD - BIM Object
en versión A, actualizado: sep 2021
en  sep 2021
Compliances
  Idioma Tamaño Subido
  290 KB nov 2019
  144 KB nov 2019
fr  593 KB nov 2019
en  591 KB nov 2019
Firmware
  Versión Tamaño Subido
download icon for ERA 400 Performance - Firmware ERA 400 Performance - Firmware
versión 2.0.0, actualizado: jun 2026
2.0.0   jun 2026

Si alguno de los enlaces anteriores muestra caracteres extraños en su navegador, haga clic con el botón derecho en el archivo para guardarlo en su computadora.

HARMAN Pro Insights

Lighting Design 101: How Martin Supports Every Lighting Need feature

Lighting Design 101: How Martin Supports Every Lighting Need

Martin has a wide range of products for various applications, from industry-standard moving lights to architectural lights. In the design phase, it’s important for lighting designers to understand how these lighting fixtures work in order to give audiences a great experience. This article will explore

CONTINUE READING

MARTIN BY HARMAN WOWS THE CROWD AT LDI 2019 WITH NEW MARTIN ERA PERFORMANCE SERIES FIXTURES feature

MARTIN BY HARMAN WOWS THE CROWD AT LDI 2019 WITH NEW MARTIN ERA PERFORMANCE SERIES FIXTURES

At this year’s Live Design International tradeshow in Las Vegas, we had the pleasure of meeting with live production professionals from all around the globe to demo some of our latest products. The Martin booth featured non-stop giveaways, product raffles and even a daily live

CONTINUE READING

Soporte/FAQs

HARMAN Professional Solutions: