Exterior Wash 220
Tidak diproduksi

Lampu wash dengan kontrol suhu warna dan rating outdoor

Exterior Wash 220
Gambar Lebih Besar

Jumlah terbatas tersedia - silakan hubungi dealer Anda untuk informasi

Exterior™ Wash 220 adalah fixture pencahayaan LED yang powerful, compact, dan energy-efficient yang dirancang untuk menerangi struktur berukuran menengah dan fasad bangunan. Snoot opsional yang discreet terintegrasi dengan seamless dengan desain slick dari fixture. Dilengkapi dengan built-in display untuk kemudahan penggunaan, pilihan beam angle yang luas, dan fully IP-rated untuk penggunaan outdoor permanent.

Exterior Wash 220 dirancang untuk aplikasi variable color temperature (2700K-6500K) dan berbasis pada LED 2700K dan 6500K yang terpisah

Pelajari lebih lanjut tentang verifikasi produk dan reliabilitas kami

  • Variable color temperature control dengan 6 opsi beam angle
  • Snoot opsional yang functional dan discreet yang terintegrasi dengan desain fixture
  • Control via DMX, RDM dan OLED display

Video

 

 

Fitur

  • LED Powerful (2700K, 6500K)
  • Hingga 9300 lumen pada putih penuh
  • Enam opsi sudut berkas berbeda
  • Daya internal dan kontrol (DMX, RDM, dan tampilan OLED)
  • Casing IP66 yang kokoh
  • Kontrol intensitas 0–100%

Spesifikasi

  • Physical Length: 270 mm (10.7 in.) Width: 334 mm (13.2 in.) Height: 382 mm (15.1 in.) Weight: 13.0 kg (28.7 lbs.)
    Dynamic Effects Intensity: 0 - 100% Color temperature control: 2700 K - 6500 K
    Control and Programming Control systems: DMX, RDM Stand-alone control: Up to 20 scenes with global fade/hold times Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3 Receiver: RS-485 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Serial upload via DMX link
    Optics Light source: 2700 K and 6500 K LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:

    No diffuser: 7.5°
    Narrow diffuser: 11.5°
    Medium diffuser: 25°
    Wide diffuser: 36°
    Very wide diffuser: 60°
    Asymmetric diffuser: 59° x 14.5°

    Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 9300 lumens*

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.1 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 4 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 10.3 A Maximum total power consumption: 185 W Surge protection: 4 KV Max earth leakage: 0.50 mA
    Typical Power and Current 100 V, 60 Hz: 1.6 A, 162 W, PF 0.99 120 V, 60 Hz: 1.35 A, 160 W, PF 0.99 230 V, 50 Hz: 0.75 A, 160 W, PF 0.94 277 V, 60 Hz: 0.65 A, 160 W, PF 0.93 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F) Total heat dissipation (calculated, +/- 10%): 485 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 58 lm/w LWR*: 715 lm/kg (324 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM India: BIS
    Included Items Cover plate for control panel
    Related Items Martin Companion Cable: P/N 91616091
    Accessories Exterior Wash 200 Series, narrow diffuser kit: P/N 91610154 Exterior Wash 200 Series, medium diffuser kit: P/N 91610153 Exterior Wash 200 Series, wide diffuser kit: P/N 91610152 Exterior Wash 200 Series, very wide diffuser kit: P/N 91610151 Exterior Wash 200 Series, asymmetric diffuser kit: P/N 91610150 Exterior Wash 200 Series, glare shield / snoot: P/N 91611745 Exterior Wash 200 Honeycomb Louvre: P/N 91611857
    Ordering Information Exterior Wash 220, 7°, EU, aluminum: P/N 90509089 Exterior Wash 220, 7°, US, aluminum: P/N 90509091

Unduhan

Specifications
  Versi Bahasa Ukuran Diunggah
file type icon Exterior Wash 220 Spec Sheet-English
en versi B, diperbarui: Nov 2018
en  700 KB Nov 2018
file type icon Exterior Wash System Diagrams
en versi B, diperbarui: Okt 2020
en  295 KB Okt 2020
Manuals
  Versi Bahasa Ukuran Diunggah
file type icon Exterior Wash 200 Series - User Manual
en versi M, diperbarui: Jul 2023
en  1,28 MB Jul 2023
file type icon Exterior Wash 200 Serie - Bedienungsanleitung
de versi A, diperbarui: Jul 2020
de  876 KB Jul 2020
file type icon Exterior Wash 200 Series - Manuel d'utilisation
fr versi A, diperbarui: Okt 2020
fr  662 KB Okt 2020
Photometrics
  Versi Bahasa Ukuran Diunggah
file type icon Exterior Wash 220 - Photometric Files
en versi A, diperbarui: Mar 2024
en  459 KB Mar 2024
Illustrations
  Versi Bahasa Ukuran Diunggah
en  7,43 MB Okt 2020
en  1,89 MB Okt 2020
en  7,9 MB Okt 2020
en  1,76 MB Okt 2020
Symbols
  Versi Bahasa Ukuran Diunggah
file type icon AutoCAD 2D Symbols
en versi 2.8, diperbarui: Jan 2026
2.8  en  4,42 MB Jan 2026
file type icon AutoCAD 3D Symbols
en versi 2.8, diperbarui: Jan 2026
2.8  en  18,7 MB Jan 2026
file type icon Vectorworks Symbols
en versi 4.6, diperbarui: Jan 2026
4.6  en  249 MB Jan 2026
Compliances
  Versi Bahasa Ukuran Diunggah
en  95 KB Okt 2020
file type icon Exterior Wash Series - ETL Listing Verification
en versi B, diperbarui: Mei 2018
en  349 KB Mei 2018
  407 KB Mei 2018
Service Notes
  Versi Bahasa Ukuran Diunggah
  743 KB Okt 2020
en  1020 KB Okt 2020
EW series Incorrect warning print
diperbarui: Mei 2018
      Mei 2018
Tech Notes
  Ukuran Diunggah
file type icon EW-Series UV Warning Printing
diperbarui: Jan 2018
Jan 2018
Firmware
  Versi Ukuran Diunggah
download icon for Exterior Wash 220 - Firmware Exterior Wash 220 - Firmware
versi 2.0.0, diperbarui: Jul 2026
2.0.0   Jul 2026

Jika ada tautan di atas yang menampilkan karakter aneh di browser Anda, klik kanan file tersebut untuk menyimpannya ke komputer Anda.

Dukungan/FAQ

HARMAN Professional Solutions: