home > prodotti > Luci Statiche > RUSH FiberSource 1

RUSH FiberSource 1
Fuori produzione

RUSH FiberSource 1

Immagini più grandi

Un aggiornamento molto atteso del FiberSource QFX 150, il nuovo RUSH FiberSource 1 è uno strumento potente per illuminare cavi in fibra ottica nelle installazioni permanenti. Con un nuovo proiettore LED in fibra da 78 W, il RUSH FiberSource 1 vanta un'efficienza e un'affidabilità migliorate mantenendo tutte le caratteristiche chiave del suo predecessore, come nove colori intercambiabili, una ruota effetti scintillio, regolazione elettronica dell'intensità e controllo DMX/standalone.

Proiettore LED in fibra da 78 W
9 colori intercambiabili
Controllo elettronico dell'intensità da 0 a 100%

Video

Caratteristiche

Proiettore LED a fibre ottiche 78 W
9 colori intercambiabili
Controllo dell'intensità elettronico 0-100%
Ruota effetto scintillio
Controllo DMX o standalone
Fino a 300 cavi in fibra ottica (1 mm)

Specifiche

Physical Length: 305 mm (12.0 in.) Width: 210 mm (8.3 in.) Height: 200 mm (7.9 in.) Weight: 7.6 kg (16.8 lbs.)

Dynamic Effects Color wheel: 9 interchangeable filters + open, indexing, continuous rotation Twinkle effect: Continuous rotation, variable speed and direction Dimming: 0 - 100% continuous dimming

Control and Programming Control options: DMX, standalone, master/client DMX channels: 5 Standalone programming: DIP switch Settings and DMX addressing: DIP switch DMX compliance: USITT DMX512/1990

Optics Light source: CREE 78 W LED Minimum LED lifetime: 35,000 hours (to >70% luminous output)* CRI (Color Rendering Index): >70 Color temperature: 6000–7000 K *Figure obtained under test conditions.

Construction Housing: Steel and aluminum Color: Black (RAL 9005) Protection rating: IP20

Installation Mounting points: Four rubber-mounting grommets, two Ø13 mm holes for rigging clamps Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m (7.9 in.) Minimum clearance around fan and air vents: 0.1 m (4.0 in.)

Connections AC power input/output: Neutrik PowerCon DMX data in/out: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode

Typical Power and Current 110 V, 60 Hz: 0.8 A, 87 W, PF 0.986 230 V, 50 Hz: 0.5 A, 86 W, PF 0.909 Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

Thermal Cooling: Forced air (regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, at 40° C ambient: 50° C (122° F)

Approvals EU safety: EN 60598-2-1 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61547 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C22.2 No. 250.0 Australia/NZ: C-TICK N4241

Included Items Power cable, 1.5 m (4.9 ft.), without mains plug:
Color filter M05, blue 108L w. adaptor
Color filter M05, yellow 603L w. adaptor
Color filter M05, green 206L w. adaptor
Color filter M05, red 308L w. adaptor

Related Items Martin™ RDM 5.5 Splitter: P/N 90758150 Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com

Accessories Power connectors:
Power Connector PowerCON Male: P/N 91611795
Power Connector PowerCON Female : P/N 91611794
Cables, 16 A, for connection to power in chains:
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176
Cables, 16 A, for power input:
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
(H07RN-F are European approved cables, SJOOW are US approved cables)
Filters:
Color filter M05, green 202L w. adaptor: P/N 62327931
Color filter M05, blue 111L w. adaptor: P/N 62327928
Color filter M05, blue 101L w. adaptor: P/N 62327929
Color filter M05, cyan 401L w. adaptor: P/N 62327930
Color filter M05, yellow 604L w. adaptor: P/N 62327932
Color filter M05, red 301L w. adaptor: P/N 62327933
Color filter M05, pink 312L w. adaptor: P/N 62327934
Color filter M05, purple 502L w. adaptor: P/N 62327936
Color filter M05, green 204L w. adaptor: P/N 62327937
Color filter M05, orange 306L w. adaptor: P/N 62327938
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information RUSH FiberSource 1™ in cardboard box: P/N 90280070

Download

Manuals

	Versione	Lingua	Dimensione	Caricato
RUSH FiberSource 1 - Manuel d'Utilisation versione A, aggiornato: mag 2018	A		1,1 MB	mag 2018
RUSH FiberSource 1 - User Manual versione A, aggiornato: lug 2020	A		1,13 MB	lug 2020
RUSH FiberSource 1 - Bedienungsanleitung versione A, aggiornato: lug 2020	A		1,46 MB	lug 2020

Illustrations

	Versione	Lingua	Dimensione	Caricato
RUSH FiberSource 1 - 2D (PDF) versione A, aggiornato: mag 2018	A		657 KB	mag 2018
RUSH FiberSource 1 - 2D (DWG) versione A, aggiornato: mag 2018	A		621 KB	mag 2018

Symbols

	Versione	Lingua	Dimensione	Caricato
Vectorworks Symbols versione 4.6, aggiornato: gen 2026	4.6		249 MB	gen 2026

Compliances

	Versione	Lingua	Dimensione	Caricato
RUSH FiberSource 1 - ETL Listing Verification versione A, aggiornato: mag 2018	A		387 KB	mag 2018
RUSH FiberSource 1 - EU Declaration of Conformity versione A, aggiornato: mag 2018	A		45,1 KB	mag 2018

Service Notes

	Versione	Lingua	Dimensione	Caricato
3D Partsfinder - Opening using Solid Works Composer Player versione 4, aggiornato: ott 2020	4		743 KB	ott 2020

Tech Notes

	Dimensione	Caricato
Avoiding damage from sunlight and other light sources aggiornato: set 2017		set 2017

Hints and Tips

	Versione	Lingua	Dimensione	Caricato
Avoiding damage from sunlight and other light sources versione B, aggiornato: mag 2018	B			mag 2018

Firmware

	Versione	Dimensione	Caricato
RUSH FiberSource 1 - Firmware versione 1.1, aggiornato: lug 2026	1.1		lug 2026

Se uno dei link sopra produce caratteri strani nel tuo browser, fai clic destro sul file per salvarlo sul tuo computer.

Supporto/FAQ

HARMAN Professional Solutions:

Supporto Consulenti