RUSH FiberSource 1

Larger Images

A highly anticipated update to the FiberSource QFX 150, the new RUSH FiberSource 1 is a powerful tool for illuminating fiber optic cables in permanent installations. With a new 78 W LED fiber projector, the RUSH FiberSource 1 boasts improved efficiency and reliability while retaining all the key features of its predecessor, such as nine interchangeable colors, a twinkle effects wheel, electronic dimming and DMX/stand-alone control.

  • 78 W LED fiber projector
  • 9 interchangeable colors
  • 0-100% electronic intensity control


RUSH FiberSource 1



  • 78 W LED fiber projector
  • 9 interchangeable colors
  • 0-100% electronic intensity control
  • Twinkle effect wheel
  • DMX or stand-alone control
  • Up to 300 fiber cables (1 mm)

Tech Specs

PhysicalLength: 305 mm (12.0 in.)Width: 210 mm (8.3 in.)Height: 200 mm (7.9 in.)Weight: 7.6 kg (16.8 lbs.)
Dynamic EffectsColor wheel: 9 interchangeable filters + open, indexing, continuous rotationTwinkle effect: Continuous rotation, variable speed and directionDimmer: 0 - 100% continuous dimming
Control and ProgrammingControl options: DMX, standalone, master/slaveDMX channels: 5Standalone programming: DIP switchSettings and DMX addressing: DIP switchDMX compliance: USITT DMX512/1990
OpticsLight source: CREE 78 W LEDColor temperature: 6000–7000 KCRI (color rendering index): >70Minimum LED lifetime: 35 000 hours (to >70% luminous output)**Figure obtained under test conditions
ConstructionColor: Black (RAL 9005)Housing: Steel and aluminumProtection rating: IP20
InstallationMounting points: Four rubber-mounting grommets, two Ø13 mm holes for rigging clampsLocation: Indoor use only, must be fastened to surface or structureMinimum distance to combustible materials: 0.2 m (7.9 in.)Minimum clearance around fans and vents: 0.1 m (4.0 in.)Orientation: Any
ConnectionsAC power in/out: Neutrik PowerConDMX data in/out: 3-pin and 5-pin locking XLR
ElectricalAC power: 100-240 V, 50/60 HzPower supply unit: Auto-ranging electronic switch-mode
Typical Power and Current110 V, 60 Hz: 0.8 A, 87 W, PF 0.986230 V, 50 Hz: 0.5 A, 86 W, PF 0.909Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
ThermalCooling: Forced air (regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 5° C (41° F)Maximum surface temperature, steady state, at 40° C ambient: 50º C (122° F)
ApprovalsEU Safety: EN 60598-2-1EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61547US Safety: ANSI/UL 1598US EMC: 47 CFR Part 15 Class ACanadian Safety: CSA C22.2 No. 250.0Australia/NZ: C-TICK N4241
Included ItemsPower cable, 1.5 m (4.9 ft.), without mains plug:Color filter M05, blue 108L w. adaptor:Color filter M05, yellow 603L w. adaptor:Color filter M05, green 206L w. adaptor:Color filter M05, red 308L w. adaptor:
AccessoriesFiltersColor filter M05, green 202L w. adaptor: P/N 62327931Color filter M05, blue 111L w. adaptor: P/N 62327928Color filter M05, blue 101L w. adaptor: P/N 62327929Color filter M05, cyan 401L w. adaptor: P/N 62327930Color filter M05, yellow 604L w. adaptor: P/N 62327932Color filter M05, red 301L w. adaptor: P/N 62327933Color filter M05, pink 312L w. adaptor: P/N 62327934Color filter M05, purple 502L w. adaptor: P/N 62327936Color filter M05, green 204L w. adaptor: P/N 62327937Color filter M05, orange 306L w. adaptor: P/N 62327938Cables, 16 A, for connection to power in chainsPower input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511Power connectorsNeutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey:P/N 05342805Installation hardwareHalf-coupler clamp: P/N 91602005G-clamp (vertical suspension only): P/N 91602003Quick-trigger clamp (vertical suspension only): P/N 91602007
Ordering InformationRUSH FiberSource 1™ in cardboard box: P/N 90280070


  Version Language Size Uploaded
RUSH FiberSource 1 - Manuel d'Utilisation fr  1.1 MB Dec 03, 2015
RUSH FiberSource 1 - User Manual en  1.13 MB Sep 21, 2015
RUSH FiberSource 1 - Bedienungsanleitung de  1.46 MB Dec 03, 2015
RUSH FiberSource 1 - 2D (PDF) en  657 KB Aug 14, 2015
RUSH FiberSource 1 - 2D (DWG) en  621 KB Aug 14, 2015
Cad Drawings
Vectorworks Symbols 2.5  en  110 MB Mar 27, 2018
RUSH FiberSource 1 - ETL Listing Verification en  387 KB Jun 16, 2015
RUSH FiberSource 1 - EU Declaration of Conformity en  45.1 KB Jun 16, 2015
RUSH FiberSource - Software 1.1  en  133 KB Nov 11, 2015
RUSH Uploader DMX - Tool 1.1  en  1.18 MB Oct 08, 2015
Service Notes
3DPartsfinder Using Solid Works Composer Player     Sep 22, 2017
3DPartsfinder using Solid Works Composer player en    Mar 04, 2016
Tech Notes
Avoiding damage from sunlight and other light sources     Sep 22, 2017
Hints And Tips
Avoiding damage from sunlight and other light sources en    Dec 09, 2012

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.


RUSH FiberSource 1